Products

The testo 905-T2 surface thermometer is the best tool for measuring the temperature on both smooth a (more)nd uneven surfaces. This is because its temperature probe (type K thermocouple) has a measuring head with a spring-loaded thermocouple strip that fits to the surface. This method avoids having to tilt the probe, which leads to incorrect measurements. Another advantage of this probe is the measurement speed. So not only a great precision, ± (1°C ± 1% of mv), but an extraordinarily fast response time: t₉₉ = 5 s. The testo 905-T2 surface thermometer also convinces with its large measuring range from -50 to +350°C. Measurements up to +500°C are also possible for a short time (1 to 2 minutes). This means that the same tool can be used for different applications, eg. in the field of heating, plumbing or refrigeration technology. In addition, the surface thermometer is particularly suited to temperature measurements on pipes, as its thermocouple probe is easily able to cope with their uneven surfaces.   EXTREMELY EASY TO USE Too easy: The measured values ​​can be read comfortably on the clear display, which can be read from different angles, thanks to the swivel joint which can be constantly adjusted to the viewing angle. If you forget to switch off the surface thermometer after the measurement, it will switch off automatically after approx. 10 minutes of non-use. You will receive: Surface thermometer with cross band probe, clip attachment, battery.

ScanTemp 385 Dostmann infrared thermometer Infrared thermometers use this technology to measure the  (more)surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. Technical features Temperature range: -35°C ... +365°C Accuracy: ± 2.0% of reading or ±2°C, whichever is greater Repeatability: ± 1.0% of reading or ± 1°C, whichever is greater Elapsed time: 500 ms Spectral response: 8 - 14 µm Display resolution: 0.1°C (4-digit LCD) Working temperature: 0°C ... 50°C Switchable emissivity: 0.70 and 0.95 Distance - spot size: 8:1 Single offset point: laser Power supply: 2 AAA batteries Dimensions (L x W x H): 147.9 x 112.6 x 41.4 mm Weight: 113 g Features: Maximum temperature; display hold; LCD backlight; °C / °F switchable

The economical mini thermometer with Min / Max alarms. Small in size but of great use and quality! T (more)he penetration probe is connected to the instrument with an 80 cm cable and is suitable for measuring the temperature of air, in soft or dusty substances and in liquids. Scope of supply Mini alarm thermometer with penetration probe (probe length 190 mm, probe cable 80 cm) including fixing clip and batteries. For technical data download the technical data sheet.

Dostmann professional infrared thermometer ScanTemp 450 Infrared thermometers use this technology to (more) measure the surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. - Type K thermocouple probe input - Wide range of temperatures: - Infrared: -60 ... +500°C - Thermocouple: -64 ... +1400°C - With circular laser sight - Large display with simultaneous display of reading and Max / Min or Alarm - Belt bag included - HOLD-MAX / MIN / DIF / AVG function (keeps various measurements on the display, such as maximum and minimum) - Tatso lock function for continuous measurement Application: Detect problems with keeping a process at temperature Food safety (HACCP) HVAC Electrical maintenance Intangible parts (fresh paint) Road construction Commercial printing Plastic molding Car maintenance Technical features Temperature range: -60°C ... +500°C, (thermocouple input: -64 ... +1400°C) Accuracy: ± 2.0% of reading or ±2°C, whichever is greater Spectral response: 6 - 14 µm Display resolution: 0.1°C (above 200°: 1°) Working temperature: 0°C ... 50°C Distance - spot size: 11:1 Power supply: 2 AAA batteries, with about 270 hours of operation Dimensions (L x W x H): 175.2 x 39 x 7.9 mm Weight: 140g

Digital Display, Total Control of Operations AREX Digital PRO is the evolution of our best-seller, t (more)he most advanced tool available to date. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500 rpm). The SpeedServo ™ system ensures a constant speed even when the viscosity varies (counter-reaction). AREX Digital PRO offers the most advanced technology, being equipped with digital displays to set and monitor both stirring speed and temperature constantly and with absolute precision. Temperature regulation of the liquid being processed with an external probe The AREX Digital PRO package includes the external Pt100 probe, capable of reaching 250°C, with an accuracy of ±1.0°C, providing a ready-to-use system capable of directly thermoregulating the sample being processed. Previous model video: Maximum Temperature Homogeneity The particular CerAlTop™ plate, in aluminum alloy coated with a ceramic layer, ensures a formidable homogeneity of the temperature over the entire surface of the plate itself, up to 370°C and at the same time an excellent resistance to chemical agents and ease of cleaning. Maximum Protection, IP 42 AREX Digital PRO magnetic stirrers guarantee a high level of safety and protection for the user. The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. AREX Digital PRO can be programmed with a maximum safety temperature, for some particular applications that require specific temperatures and in order to prevent unpleasant situations. In addition, the electronic board activates a high temperature warning ('Hot Plate Warning') which remains active even with the instrument off, when the plate temperature is above 50°C. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Low Profile, Attractive Design AREX Digital PRO offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use and make it clear that the digital displays indicating speed and temperature can be read. Greater Versatility with the new MonoAlublock™ and MultiAlublock™ The MultiAlublock™ and the new MonoAlublock™ made of aluminum are ideal for carrying out numerous agitation and heating analyzes, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, you can choose the mix that best suits your needs. Technical features: Pt100 connection: provided Vertex connection: provided Counter-reaction: constant speed Electronic temperature regulation: from room temp. to 370°C Maximum safety temperature digitally settable: temperature limit can be set between 50 and 370 °C "Hot Plate Warning"  whenever the top plate temperature is over 50 °C Sample thermoregulation: ± 0.5 °C by using the Vertex thermoregulator (AREX Digital PRO); ± 1.0 °C by using Pt100 Stirring system: high-power driving magnet type ''PCM'' operated by a mono-phase motor for continuous operation

One UHF Synthesizer Manuf.: Rohde & Schwarz / GERMANY Model: 701.6009.02 VN: 5865-12-199-8448 MOD  (more)0 Description: thsi is an UHF Synthesizer  Module for very special applications FREQUENCY HOPPING SPREAD SPECTRUM ( FHSS )   for MIL Applications  , but skilled user should be able to use it also for private and Amateur Radio by modify it accordingly Furthermore the components inside are of highest standard and could be used separately ( see photo of opened module ).... the module will be delivered in its case ready to plugHighest Frequency Stability generated by a TCXO from STC the module is brandnew and out of Spare Parts Stock.......so it should work 100 % we sell also the VD613 UHF Amplifier , 30 Watts for use with this synthesizer as LINEAR AMPLIFIER for FHSS

'F' Series - B Medical Systems The 'F' Series Plasma Freezers offer integrated B Medical Systems mul (more)tifunction electronics, with various alarm systems, battery backup and many other control features. The system is compatible with the °B Connected solution for remote monitoring and data logging. The polypropylene frame with one-piece print is guaranteed for life against corrosion. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. This instrument complies with national and international guidelines and regulations for Medical Devices. It offers reliability, efficiency and safety at an optimal price. Congelatore al plasma F381 - Capacità di stoccaggio (sacche di plasma da 350ml): 284 - Limite degli allarmi di temperatura freddo/caldo: -37°C / -27°C - Conforme a DIN 58375 - AABB Standards. Medical Device according to MDR (EU) 2017/745, Class IIa - Elettronica multifunzione con display a 0,1°C - Struttura anticorrosione garantita a vita Control Panel - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery The design - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times Standard equipment and accessories - 2 keys for opening the door - Electronics under lock and key - Automatic shutdown of the fan when the door is opened so as not to lose cold - Backup battery with a duration of approx. 48 hours - Acoustic alarms for exceeding high and low temperatures and/or general alarm - Remote alarm - Open door alarm - Hole for sensor input - One standard drawer + two adjustable shelves Tutta la linea dedicata alla conservazione di sangue e dericati: According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B