Kirsch Thermoscript temperature writer

The testo 905-T2 surface thermometer is the best tool for measuring the temperature on both smooth a (more)nd uneven surfaces. This is because its temperature probe (type K thermocouple) has a measuring head with a spring-loaded thermocouple strip that fits to the surface. This method avoids having to tilt the probe, which leads to incorrect measurements. Another advantage of this probe is the measurement speed. So not only a great precision, ± (1°C ± 1% of mv), but an extraordinarily fast response time: t₉₉ = 5 s. The testo 905-T2 surface thermometer also convinces with its large measuring range from -50 to +350°C. Measurements up to +500°C are also possible for a short time (1 to 2 minutes). This means that the same tool can be used for different applications, eg. in the field of heating, plumbing or refrigeration technology. In addition, the surface thermometer is particularly suited to temperature measurements on pipes, as its thermocouple probe is easily able to cope with their uneven surfaces.   EXTREMELY EASY TO USE Too easy: The measured values ​​can be read comfortably on the clear display, which can be read from different angles, thanks to the swivel joint which can be constantly adjusted to the viewing angle. If you forget to switch off the surface thermometer after the measurement, it will switch off automatically after approx. 10 minutes of non-use. You will receive: Surface thermometer with cross band probe, clip attachment, battery.

Infrared thermometer with circular laser ScanTemp 485 professional Dostmann Infrared thermometers us (more)e this technology to measure the surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. - Precision glass optics for accurate non-contact temperature measurement - Optical resolution 20: 1 - DoubleLaser sighting with narrow beam targeting for accurate readings - High / low audible alarm adjustable Application: Detect problems with keeping a process at temperature Food safety (HACCP) HVAC Electrical maintenance Intangible parts (fresh paint) Road construction Commercial printing Plastic molding Car maintenance Technical features Temperature range: -50°C ... +800°C Accuracy: ± 2.0% or ± 2°C Spectral response: 8 - 14 µm Measurement time: about 0.2s Display resolution: 0.1°C (LCD) Working temperature: 0°C ... 50°C Emissivity: 0.10-1.00 Distance - spot size: 20: 1 Signal processing: Min / Max / Scan / Hold / Ems / °C / °F Backlight: Yes Alarm: high / low visual and acoustic Laser: <1mW Laser class IIa Power supply: 9V alkaline battery Battery life: 20 hours with 50% laser and backlight; 40 hours with laser e backlight off Dimensions (L x W x H): 146x104x43 mm Weight: 450g

The testo 104-IR infrared food thermometer is both a penetration probe and an infrared thermometer.  (more)It is ideal for controlling the temperature of food. Comfortably tucked into your jacket pocket, it is always available and close at hand during the arrival of goods, during transport or during the inspection tour. - Surface and internal temperature measurement, with laser pointer and penetration probe - Compliant with HACCP (Hazard Analysis and Critical Control Points - Hazard Analysis and Control of Critical Points) / EN 13485 - Robust and practical: solid hinged joint, waterproof housing (IP65), pocketable - Easy to read LCD display - Dirt cannot adhere to the tool 2 in 1 With its precise 2-point laser sensor and 10: 1 focus, the testo 104-IR indicates the exact measuring range and enables error-free measurement of surface temperatures. In particular, at the entrance of the goods, the thermometer scans the surface temperature of individual foods or entire pallets of goods quickly, simply and without contact. The detachable penetration probe also allows the core temperature to be measured in case of doubt - for example when dealing with meat and sausages. In fact, the penetration probe is often used if the surface temperature measured with infrared is above or below the limit value; therefore, the core temperature is measured for further control. After measurement, the penetration probe folds back into its housing. EASY, FAST AND PRACTICAL FOR EVERYDAY ROUTINE The instrument is activated as soon as the penetration probe is removed. The infrared sensor turns on as soon as the button is pressed. The measurement results can be read very well on the large display and, thanks to the few intuitive keys, the instrument is easy to use without the need to undergo any particular training. Another practical advantage: The thermometer is waterproof (IP65). POSSIBLE APPLICATIONS Whether it is for the acceptance, storage or transport of food - compliance with the cold chain is an obligation of utmost importance. For checking the prescribed temperature limit values, the testo 104-IR infrared food thermometer is the ideal tool, regardless of which point in the cold chain you want to test. Like all Testo temperature meters for the food industry, the testo 104-IR is certified according to the European standard EN 13485 and is HACCP-compliant. Package Contents 1 x testo 104-IR waterproof penetration / infrared thermometer, incl. retractable penetration probe, batteries and test protocol.

Professional infrared thermometer ScanTemp 490 Dostmann professionalInfrared thermometers use this t (more)echnology to measure the surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. - Non-contact measurement with input for K-type thermocouple probes - Large display: simultaneous display of Max / Min or Alarm temperature detected - With laser point and backlight - Resolution 50: 1 - Wide range of temperatures: infrared -60 ... +1000°C; thermocouple -64 ... +1400°C - HOLD-, MAX-, MIN-, DIF-, AVG function - Adjustable emissivity - Alarm function, audible and optical - Lockmode for continuous measurements Application: - Moving parts - Temperature of gears and motors - Detect problems with keeping a process at temperature - Food safety (HACCP) - HVAC - Electrical maintenance - Intangible parts (fresh paint) - Road construction - Commercial printing - Plastic molding - Car maintenance Technical features Temperature range: -60°C ... +1000°C (with thermocouple -64 ... + 1400°C) Accuracy: ± 2.0% or ± 2 ° C (thermocouple ± 1.0% or ± 1°C) Spectral response: 6 - 14 µm Measurement time: about 0.2s Display resolution: 0.1°C (LCD) Working temperature: 0°C ... 50°C Distance - spot size: 50: 1 Power supply: 2 x 1.5 volts AAA Battery life: approximately 40 hours of operation Dimensions (L x W x H): 215 x 145 x 45 mm Weight: 1150g

Dostmann professional infrared thermometer ScanTemp 410 Infrared thermometers use this technology to (more) measure the surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. Features: - With circular laser sight - Backlight - Belt bag included - MAX-HOLD function (keeps the highest temperature recorded on the display) Application: Detect problems with keeping a process at temperature Food safety (HACCP) HVAC Electrical maintenance Road construction Commercial printing Plastic molding Car maintenance Technical features Temperature range: -60°C ... +500°C Accuracy: ± 2.0% of reading or ±2°C, whichever is greater Repeatability: ± 1.0% of reading or ±1°C, whichever is greater Elapsed time: 500 ms Spectral response: 8 - 14 µm Display resolution: 0.1°C (4-digit LCD) Working temperature: 0°C ... 50°C Emissivity: 0.95 Distance - spot size: 12:1 Laser: circular laser sight Power supply: 2 AAA batteries Dimensions (L x W x H): 175 x 39 x 79 mm Weight: 180 g Features: maximum temperature; display hold; LCD backlight; custody; °C / °F switchable

Dostmann professional infrared thermometer ScanTemp 450 Infrared thermometers use this technology to (more) measure the surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. - Type K thermocouple probe input - Wide range of temperatures: - Infrared: -60 ... +500°C - Thermocouple: -64 ... +1400°C - With circular laser sight - Large display with simultaneous display of reading and Max / Min or Alarm - Belt bag included - HOLD-MAX / MIN / DIF / AVG function (keeps various measurements on the display, such as maximum and minimum) - Tatso lock function for continuous measurement Application: Detect problems with keeping a process at temperature Food safety (HACCP) HVAC Electrical maintenance Intangible parts (fresh paint) Road construction Commercial printing Plastic molding Car maintenance Technical features Temperature range: -60°C ... +500°C, (thermocouple input: -64 ... +1400°C) Accuracy: ± 2.0% of reading or ±2°C, whichever is greater Spectral response: 6 - 14 µm Display resolution: 0.1°C (above 200°: 1°) Working temperature: 0°C ... 50°C Distance - spot size: 11:1 Power supply: 2 AAA batteries, with about 270 hours of operation Dimensions (L x W x H): 175.2 x 39 x 7.9 mm Weight: 140g

PELTIER LABORATORY INCUBATORS ILP SMART POL-EKO ILP - REFRIGERATION WITH PELTIER TECHNOLOGY ILP incu (more)bators are innovative and ecological instruments, which use the Peltier system to cool the internal chamber. They maintain a constant temperature from 0°C to 70°C, being able to drop to a maximum of 20°C below the ambient temperature. Cooling with Peltier technology gives these instruments multiple advantages: they are silent, vibration-free, precise and ecological. And then: large touch display, programming, alarms, lock, stainless steel interior and much more. Continue reading and discover all the other amazing features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. ILP SMART SERIES The ILP series with Peltier cooling offers you four models, from 56 to 749 liters of internal volume. The models are available with two different external finishes: in light gray powder-coated sheet metal with a graphite top panel or completely in stainless steel, with a linen-like texture. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Temperature sensor 4 - Internal glass door 5 - Adjustable feet 6 - Stainless steel shelf 7 - Solid external door 8 - Peltier module fans 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 1 - Main switch 2 - Spacer 3 - External fans of the Peltier module 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door