IKA RET Hot Plate with Magnetic Stirrer

FIRLABO BCR240 refrigerated oven/incubator with forced convection refrigerated incubator FROILABO /  (more)FIRLABO Model: BCR 240 Capacity: 223 / 240 liters Temperature range: 0°C to 65°C Interior dimensions: (L) x (D) x (H): 50 x 45 x 98cm External dimensions: (L) x (D) x (H): 63 x 64 x 153 cm 4 perforated stainless steel shelves, non-tilting On self-locking casters 230 V / 50/60 Hz 1500W Weight: 114 kg Year of manufacture: 2005 Tested at 0°C and 37°C

This Buchi Drying Glass Oven  Type - B-585 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and was tested with a digital thermometer (not included). When set to 40˚C he thermometer measured 32˚C.When set to 100˚C  the thermometer measured 80˚C.When set to 200˚C the thermometer measured 173˚C. It was not tested higher for safety reasons. The item is in a reasonable, used cosmetic condition but the glass needs a good clean inside.

Thermo Scientific ThermoFlex 900 Recirculating Chiller LabModel: ThermoFlex 900 101163010000001 This (more) item was removed from a university where it was surplus to requirement. It is in good cosmetic condition and in good working order.

Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V Temperature Range Ambient +5°C to 26 (more)0°C Temperature Distribution Accuracy ± 5.0°C at 260°C Chamber Volume 99L Features - Excellent temperature accuracy - Easy to use and maintain - Equipped with a 6 pattern PID program controller with easy program settings (30 steps x 1, 15 steps x 2, 10 steps x 3) - Simultaneous display of set constant and measured temperature - Quick Auto stop, Auto Stop, Auto Start operations - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V offers excellent temperature accuracy and user-friendly operation. It features a 6 pattern PID program controller, capable of executing complex programs (30 steps x 1, 15 steps x 2, 10 steps x 3), and displays both set and measured temperatures simultaneously. This oven operates within a temperature range of room temperature +5 to 260°C, achieving temperature control accuracy of ±1.0°C and distribution accuracy of ±5.0°C at 260°C. It can reach its maximum temperature in approximately 90 minutes. Constructed with a stainless-steel interior and a cold rolled steel plate exterior with a melamine resin baking finish, the DVS-402C is easy to maintain. It features glass wool insulation, a 1.2kW stainless pipe heater, and includes an observation window made of chemically strengthened glass. Additional features include a cable hole, exhaust ports, a comprehensive timer, and various operation functions like Auto Start, Auto Stop, and Quick Auto-stop. Safety is ensured with self-diagnostic functions and an electric leakage breaker with overcurrent protection. The internal dimensions are 450×490×450mm, external dimensions are 560×601×820mm, and it can support a shelf plate load of about 15kg. The DVS-402C is ideal for precise, programmable heating applications. INCLUDED: The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V includes: - 2 x Stainless Steel Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UN260plus Natural Convection Oven 256L, 115V Setting Temperature Range +20°C to +300°C Conv (more)ection Type Natural Convection Chamber Volume 256 L (9 cu. ft.) Features - Internal volume of 256 L (9 cu. ft.), ideal for large capacity applications - Working temperature range from +5°C above ambient to +300°C, perfect for various laboratory tasks - Precise temperature control with a resolution of 0.1°C up to 99.9°C, 0.5°C from 100°C, ensuring accuracy - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays for easy monitoring and control - AutoSAFETY feature with integrated over- and undertemperature monitor "ASF" to ensure the safety of sensitive samples - Admixture of pre-heated fresh air via an electronically adjustable air flap for enhanced air circulation - Robust stainless steel interior with reinforced ribbing and integrated large-area heating for durability and hygiene - Maximum chamber loading of 661 lbs. with a maximum per shelf loading of 44 lbs., providing ample support for heavy-duty applications The Memmert UN260plus Natural Convection Oven 256L, 115V is designed to provide precise and consistent heating for a variety of laboratory applications. With a large internal volume of 256 liters (9 cu. ft.), it offers ample space for handling large batches or bulky materials. The oven operates within a temperature range of +5°C above ambient to 300°C, ensuring flexibility for both low and high-temperature tasks. The integrated TwinDISPLAY features a high-definition TFT-color display and a PID-microprocessor controller, allowing for easy adjustments and monitoring of temperature, airflow, and timing parameters. The oven’s two Pt100 sensors work in tandem for mutual monitoring, ensuring continuous temperature accuracy and reliability. Safety and efficiency are paramount in the design of the Memmert UN260plus. The oven is equipped with AutoSAFETY, which includes over- and under-temperature monitoring with the ASF system, providing immediate alerts for any temperature deviations. Fresh air admixture is optimized through an electronically adjustable air flap, ensuring uniform heating. The durable stainless steel interior is easy to clean, corrosion-resistant, and reinforced with large-area heating on four sides, making it perfect for rigorous use in demanding environments. With a maximum chamber loading capacity of 661 lbs. and high-quality construction, this oven is an ideal solution for laboratories requiring robust and reliable thermal performance. INCLUDED: TheMemmert UN260plus Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA C-MAG HP 4 Hot Plate Volume Max. 5 L Plate Dimensions (mm) 100 x 100 Working Temperature 50 - 5 (more)00 °C Features - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Exact temperature setting via digital display (LED) - Digital error code display - Elevated control panel for protection against leaking liquids The C-MAG HP 4 hotplate features a durable ceramic glass surface with excellent chemical resistance. It has a fixed safety circuit of 550 °C, a Hot Top indicator for burn prevention, and an exact temperature setting via a digital LED display. Designed with an elevated control panel to protect against leaks, it offers a single heating point with a 250 W output, heating from 50 to 500 °C, and a turning knob for control. Compact and lightweight, it measures 150 x 105 x 260 mm and weighs 3 kg, suitable for up to 5 liters of volume. It operates at 120 V, 50/60 Hz, with a power input of 255 W, and meets IP 21 protection standards. Click Here to View Product Video INCLUDED: The IKA C-MAG HP 4 Hot Plate includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA C-MAG HP 4 Hot Plate Specifications Number of heating points1Heat output250 WHeating temperature range50 - 500 °CHeat controlTurning knobSet temperature resolution10 ±KVolume max.5 l Heating rate heating plate2.5 K/min Set-up plate materialceramic Set-up plate dimensions100 x 100 mmDimensions (W x H x D)150 x 105 x 260 mmWeight3 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage230 / 120 / 100 VFrequency50/60 HzPower input255 WComparison of ModelsSpecificationsC-MAG HP 10C-MAG HP 4C-MAG HP 7Heat Output (W)15002501000Heating Temperature Range (°C)50 - 50050 - 50050 - 500Volume Max. (l)15510Heating Rate Heating Plate (K/min)52.55Set-Up Plate MaterialCeramicCeramicCeramicSet-Up Plate Dimensions (mm)260 x 260100 x 100180 x 180Dimensions (W x H x D) (mm)300 x 105 x 415150 x 105 x 260220 x 105 x 330Voltage (V)230 / 120 / 100230 / 120 / 100230 / 120 / 100.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

An economic laboratory oven but complete with the necessary adjustments and safety devices. Fine tem (more)perature regulation, clear and complete display, top safety class, front regulation of the rear air inlet. MATERIALS: - External structure in steel painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel STANDARD: - PID thermoregulator with adjustable temperature up to 300°C - 2 shelves - Rear 45 mm outlet with front device for adjusting opening/closing gap. - Safety class DIN 3.1 Microprocessor controlled Safety class DIN 3.1 (top DIN class) Laboratory Oven STE-N FALC

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements. (more) The unit powers up and works, but the door mechanism is broken, and the door will not remain closed. It is sold for spares/repairs.

Nikon BioStation IM With Parts This system was removed from a university lab where it was surplus to (more) requirements. The unit is in poor cosmetic condition and cannot be powered on or tested as several parts are missing or not connected. Therefore, this system is listed as Spares/Repair.

Selecta Precisterm thermostatic water bath. Capacity 12 L. Temperature range: ambient +5 °C to 110 ° (more)C. Stability ± 1ºC. Inner and outer stainless steel case. Inside dimensions: 15*30*30 cm (height, length, depth). Weight 8 Kg. User manual. Selecta Precisterm Water and Oil Baths. Providing excellent temperature stability for water and oil bath needs.

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: stainless steel wire Nominal value: 2 mg Material: stainless steel Exceptional Measurement Precision F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.