IKA RET Basic Hot Plate with Magnetic Stirrer

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 15 l Maximun loa (more)d: 20 kg Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Stirring bar length max: 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h): +1 K Heating temperature range: 50 – 500°C Heat control: Turning knob Temperature setting resolution of heating plate: 5 K Connection for ext. temperature sensor: PT1000 (not included) Fixed safety circuit: 550°C Set-up plate material: ceramic Set-up plate dimensions: 260 x 260 mm Heating rate (1l H2O in H1500): 5 K/min Dimensions (WxHxD): 300 x 105 x 415 mm Weight: 8.308 kg

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

Triple refrigerated incubator/oven POL-EKO ST1/1/1 3x55L with forced convection +3°C to +70°C New eq (more)uipment in its original packaging Model: POL-EKO-APARATURA ST 1/1/1 Capacity: 3 x 55 liters Temperature range: 3°C to 70°C Glass doors Integrated digital temperature display 2 grids per compartment Power supply: 230V Frequency: 50-60Hz Power: 750W Interior dimensions per compartment: 43 x 43 x 30 cm (L x H x D) Overall dimensions: 57 x 192 x 68 cm (L x H x D) Weight: 98 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

FIRLABO BCR240 refrigerated oven/incubator with forced convection refrigerated incubator FROILABO /  (more)FIRLABO Model: BCR 240 Capacity: 223 / 240 liters Temperature range: 0°C to 65°C Interior dimensions: (L) x (D) x (H): 50 x 45 x 98cm External dimensions: (L) x (D) x (H): 63 x 64 x 153 cm 4 perforated stainless steel shelves, non-tilting On self-locking casters 230 V / 50/60 Hz 1500W Weight: 114 kg Year of manufacture: 2005 Tested at 0°C and 37°C

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Vinitex Door cabinet high LT White 600

Intos Door cabinet RT White 570x450x690

Refrigerated centrifuge desktop large capacity Digtor 22R. Capacity max. 4 x 750 mL. Speed max. 21.9 (more)48 xg/14.300 rpm. Rotors for tubes from 0.2 ml to 750 mL. Program of pre-cooling. Guaranteed 4°C at max. rpm. Temperature of -20°C to 40°C in steps of 1°C. LED Display indicator rpm/rcf, temperature and time. Programming speed in steps of 10 rpm/10 xg. Account the back/growing. Watch 1 to 99 min, intervals 1 sec, and the time indefinite. Control of acceleration/braking. Messages the status of the equipment. Control by microcesador. PC connection. Free engine maintenance. Rotors in memory. Automatic locking and emergency. Safety stop for imbalance, an indicator of vessel where it occurs. Level noise <60 dB. Rotor not included, view available on description.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Consort EV261 Power SupplyAll Consort Maxi Series (EV200) power supplies have  (more)four output terminals for up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run. Programming–up to 9 different programs, each with 9 steps, can be stored in the nonvolatile memory for future recall. Timer–can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed. Automatic cross-over–each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant. Automatic recovery after mains failure–after restoration of power, the instrument will automatically continue the run for the remaining time. Data Transfer–optional data acquisition/control software for PC is available to visualise and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit's memory. Safety precautions –the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock. Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.