Shakers

Benchmark BenchMixer XLQ QuEChERS Shaker/VortexerBenchmark’s BenchMixer XLQ has been designed for us (more)e in QuEChERS and other sample prep methods. Supplied with racks for 50ml tubes held horizontally and 15ml and 1.5/2.0ml tubes held vertically, it takes the place of traditional manual shaking in these applications. Multiple samples can be processed simultaneously in the Benchmixer XLQ’s large capacity racks, saving time and preventing operator fatigue. The vigorous, consistent shaking ensures all samples are exposed to identical conditions within the same batch of samples, as well as between batches. The BenchMixer XLQ creates a true vortex in vertical sample racks by holding the top of the tube stationary while the bottom rotates in a 3.6mm orbit. Time and speed are precisley controlled by the digital microprocessor. A pulse mode allows for more vigorous mixing. Quiet operation, minimal vibration and a long service life are guaranteed by the precisely balanced drive system and powerful motor. Using the BenchMixer XLQ is simple. To load the sample racks, loosen the knobs on the stationary steel rods and raise the top sample plate. One rod is shorter than the other, allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lower the plate into place and tighten the knobs. Select the desired speed and run time on the digital control panel and press start. The BenchMixer XLQ can perform unattended mixing for as little as 1 minute or up to 100 hours. INCLUDED: The Benchmark BenchMixer XLQ QuEChERS Shaker/Vortexer includes: - 7 x 50ml Hortizontal Tube Rack - 50x15ml and 50x1.5/2.0ml Tube Rack - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BT4500 Orbi-Shaker CO2 with Remote Controller & 6-Position Microplate PlatformThe new  (more)Orbi-Shaker CO2-MP is designed for thorough, mixing of microplates in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 65°C and humidity levels up to 100%.To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller can magnetically mount to the outer walls of the incubator and allows the user to set and adjust the shaker settings without opening the chamber door(s). A 6 position microplate platform is included and secures both standard or deep well plates. Click Here to View Product Video INCLUDED: The Benchmark BT4500 Orbi-Shaker CO2 with Remote Controller & 6-Position Microplate Platform includes: - Rubber Mat Microplate Platform 13 x 12 in - Power Cord - Operator's Guide - Manufacturer Documentation - 2 Year Manufacturer's Warranty

Benchmark Orbi-Shaker CO2 XL Orbital Shaker The Orbi-Shaker CO2 XL is designed for shaking, mixing a (more)nd aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller allows the user to set and adjust the shaker settings without opening the chamber door(s). The instrument is supplied with a 16" x 16.5” non-slip platform. In addition, convenient MAGic Clamp platforms (available in large or small) are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method has been widely recognized as the easiest way to instantly change between flask clamps of different sizes. Click Here to View Product Video INCLUDED: The Benchmark Orbi-Shaker CO2 XL Orbital Shaker includes: - 16 x 16.5 in Platform w/ Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Orbi-Shaker CO2 w/ Remote Controller The Orbi-Shaker CO2 series is designed for shaking, m (more)ixing and aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, all settings are adjusted via the included remote control module. This module can be stored outside of the chamber and connects to the shaker via a flat (1mm thickness) cable, that easily passes through a port or underneath an incubator door without compromising the seal. This allows for user adjustment of run time or mixing speed without opening the chamber door(s). The instrument is supplied with a non-slip rubber mat platform. In addition, convenient MAGic Clamp platforms (of multiple sizes) are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method has been widely recognized as the easiest way to instantly change between flask clamps of different sizes.Click Here to View Product Video INCLUDED: The Benchmark Orbi-Shaker CO2 w/ Remote Controller includes: - 13 x 13 in Platform w/ Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Orbi-Shaker Jr. Mini Orbital Shaker Modeled after the popular Orbi-Shaker, the Orbi-Shaker (more) Jr. is a “mini sized” replica, designed for smaller capacity applications and laboratories where bench space is at a premium. The shaker includes a 9.5" x 8″ platform that mixes at a 19mm orbit, perfect for thorough mixing and aeration in Erlenmeyer flasks. An optional MAGic Clamp platform is available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Orbi-Shaker Jr. Mini Orbital Shaker includes: - 9.5 x 8 in Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Orbi-Shaker Orbital Shaker The powerful Orbi-Shaker is capable of mixing a 14 lb load capa (more)city up to speeds as high as 300 rpm with digital speed control. The standard platform (included) features a non-slip, rubber coated surface, ideal for tissue culture flasks, petri dishes, and staining trays. The convenient MAGic Clamp platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Orbi-Shaker Orbital Shaker includes: - 13 x 12 in Platform w/ Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Orbi-Blotter Orbital Shaker The Orbi-Blotter features a gentle orbital motion with speed c (more)ontrol down to as little as 3 rpm, making it the ideal orbital choice for low speed applications, such as blotting, washing, staining/destaining, etc. A large 14 x 12 in work surface is included along with a non-slip rubber mat for holding trays, dishes, plates and other flat vessels. An optional stacking platform can be purchased as an accessory, effectively doubling the usable work surface. The maintenance free, brushless motor is capable of loads up to 2 kg and is safe for use in cold rooms and incubators. INCLUDED: The Benchmark Orbi-Blotter Orbital Shaker includes: - 14 x 12 in Platform w/ Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Orbi-Shaker MP Microplate Orbital Shaker The Orbi-Shaker MP is designed with a 3mm mixing  (more)orbit, optimized for thorough mixing of microplates and/or PCR plates. Up to four plates (standard or deep well) can be placed on the included platform and are instantly secured without the use of springs, clamps or tools. Click Here to View Product Video INCLUDED: The Benchmark Orbi-Shaker MP Microplate Orbital Shaker includes: - 4 Position Micro plate Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Orbi-ShakerXL Orbital Shaker Speed Variable, 30 to 300 RPM Orbit 19 mm (0.75 in) Max Loa (more)d 65 lbs Features - Robust mixing: Variable speed from 30 to 300 RPM for diverse laboratory needs - Effective orbit of 19 mm ensures thorough mixing of samples in flasks - Exceptional capacity: Handles up to 5 x 2L or 9 x 1L flasks simultaneously - Strong load support: Maximum load capacity of 65 lbs (30 kg) for heavy-duty tasks - Precise control: Speed increment adjustments of 1 RPM for specific needs - Large platform dimensions at 17.8 x 17.8 inches (45 x 45 cm) for ample space - Compact yet powerful: Overall size 18.5x21.25x5 inches, using 450W power Your browser does not support the video tag. The Orbi-Shaker XL offers flask capacity that far exceeds that of most benchtop models. With a large 18 x 18 inch platform and a powerful, beltless motor drive, the Orbi-Shaker XL is capable of mixing up to five 2L flasks or nine 1L flasks simultaneously. The included, non-slip rubber mat platform is ideal for low speed applications, while the convenient MAGic Clamp platform is also available for high speed mixing of Erlenmeyer flasks, tube racks or microplates. The MAGic Clamp allows for instant flask clamp exchange without the use of tools, screws or any other hardware.INCLUDED: The Benchmark Orbi-ShakerXL Orbital Shaker includes: - 18 x 18in Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BenchRocker 3D Nutating Shaker The BenchRocker 3D is designed to provide the precise speed (more)s and tilt angles required for a broad range of molecular and biological mixing applications. The user can adjust both parameters to match the vessel size and the volume of liquid being mixed, yielding optimum results. Proprietary InstaTilt technology means no tools, no disassembly. Simply grip the platform with two hands and move to the desired position. This model includes both flat and dimpled (autoclavable) mats for mixing a wide variety of tubes and other vessels. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. BenchRocker 3D features a maintenance free, brushless motor, capable of loads up to 4.4 lbs and is safe for use in cold rooms and incubators. INCLUDED: The Benchmark BenchRocker 3D Nutating Shaker includes: - 12 x 12 inch Dimpled Mat and Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BioMixer 3D Nutating Shaker The Benchmark BioMixer 3D multi-functional shakers provide a 3 (more)-dimensional “nutating” motion for thorough, foam-free mixing in blood and centrifuge tubes, as well as in a variety of flat vessels. The BioMixer comes standard with an autoclavable dimpled mat while optional flat mats are also available for mixing other vessel types. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. Even the smallest single platform configuration has 24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2kg and are safe for use in cold rooms and incubators. INCLUDED: The Benchmark BioMixer 3D Nutating Shaker includes: - 12 x 12 inch Dimpled Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark MiniMixer 3D Nutating Shaker The Benchmark MiniMixer 3D multi-functional shakers provides  (more)a 3-dimensional “nutating” motion for thorough, foam-free mixing in blood and centrifuge tubes, as well as in a variety of flat vessels. The MiniMixer comes standard with an autoclavable dimpled mat while optional flat mats are also available for mixing other vessel types. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. Even the smallest single platform configuration has 24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2kg and are safe for use in cold rooms and incubators. INCLUDED: The Benchmark MiniMixer 3D Nutating Shaker includes: - 10 x 7.5 inch Dimpled Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Motion: orbital Rotation speed range: 30 – 500 rpm Operating Mode: Timer function / continuous opera (more)tion Orbit / Stroke: 10 mm Timer: Yes (max. 99 h 99 min 99 s) Platform size: 285 x 285 mm Max. Load: 5 kg

The Mini-Beadbeater-96 is a high-energy, high-throughput cell disrupter.  It can process one 2 ml de (more)ep well microplate (capacity 96 sample capacity), two 1 ml deep well microplates (192 sample capacity). The MiniBeadbeater-96 is powered with a huge 1 hp induction motor.  No other beadbeater on the market offers higher shaking energies for cell disruption. Sample Capacity: Holds one 2 ml deep-well microplate or two 1 ml deep-well microplates. Vial displacement distance or Throw: 32 mm Shaking Speed: 1400 rpm 3-D shaking pattern: Vial contents shake from the top to bottom of the vial or plate in a compressed figure-8 pattern.  Vials and microplates are held in a near-horizontal orientation rather than the less efficient vertical position. This shaking pattern assures complete cell disruption in the shortest possible time.  No reorientation of plates in mid-cycle is required. Timer: 0 – 5 minutes. Recycle delay time: No motor cool-down time is required during or between sample runs. Dimensions (WxDxH): 406 x 610 x 457 mm Weight: 55 kg

General purpose shaker with microprocessor control, ideal for basic mixing applications, staining te (more)chniques, staining and bleaching. Variable speed control provides a consistent, uniform shaking action. The speed is adjustable via a knob with 1 to 10 rotary knobs and the ramping function slowly increases the speed to the set point for added safety. Suitable for continuous use To be used at 0 to +40 °C (maximum 80% relative humidity, non-condensing), in an incubator, CO₂ incubator or cold store. Speed: 40 – 300 rpm Shaking motion: Circular motion Amplitude: 15 mm Platform (WxD): 222 x 299 mm Maximum load: 3.6 kg Dimensions (W×D×H): 280 x 430 x 102 mm Weight: 10 kg

Motion: reciprocating (horizontal) Shaking platform: 400 x 300 mm Max. load: 15 kg Shaking speed: 30 (more) – 420 rpm, in steps of 5 Stroke: 17 mm Runtime: programmable / continuous Dimensions (WxDxH): 510 x 490 x 150 mm Weight: 19 kg

Microplate shaker with microprocessor control that can accommodate two or four microplates, deep wel (more)l plates or two microtube racks. Variable speed over a wide range can be adjusted to suit the application; a low speed ensures that the contents of the well are not ejected, more vigorous stirring provides effective aeration over the small surface area of each of the wells. Ideal for use in immunology, biotechnology, microbiology and pharmacology applications. Two independent LED displays show speed and time Integrated timer, 1 s to 160 hours, shows elapsed time or counts down, automatic switch-off and acoustic alarm when program is completed Can be used at −10 to +60 °C (80% relative humidity, non-condensing), in an incubator, CO₂ incubator or cold room Speed: 100 – 1200 rpm Speed accuracy: ±2% Circular movement: 3.0mm Number of places for microplates: 4 Dimensions (WxDxH): 280 x 430 x 100 mm Weight: 10 kg

WAVE Bioreactor is the ideal device for cell culture. Culture medium and cells contact only a preste (more)rile, disposable chamber called a Cellbag that is placed on a special rocking platform. The rocking motion of this platform induces waves in the culture fluid. These waves provide mixing and oxygen transfer, resulting in a perfect environment for cell growth that can easily support 10 x 10-6 cells / ml. The bioreactor requires no cleaning or sterilization, providing the ultimate ease in operation and protection against cross-contamination.

Motion: reciprocating Rotation speed range: 30 – 250 rpm Operating Mode: timer or continuous Orbit / (more) Stroke: 32 mm Timer: yes (max. 999 min) Platform size: 290 x 258 mm Max. Load: 5 kg