Heidolph Duomax 1030 Rocking Platform Shaker (10° tilt)

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your champions. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Communication RS232 interface provides one-to-one communication for data collection and unit control (digital models) Structure Cold Rolled Steel (CRS) Construction features Integrated tray (457 x 610 mm) with non-slip rubber mat included. Technical characteristics of the SHHD2325AL model Transmission system: Brushless DC Motor; Triple Eccentric Calibration: Speed ​​calibration Orbit {metric}: 25 mm Power consumption: 75 W Safety certification: CE; TUV Speed ​​accuracy: ± 1rpm, greater than 100rpm ± 1% of set speed

Thermal shaker with Ohaus incubator OHAUS thermal agitators are designed for applications that requi (more)re constant and precise high-speed shaking, with heating or cooling. The temperature control allows to reach 17°C below the ambient temperature (for the model with cooling) up to 100°C. In case of high accuracy, the temperature can be calibrated by the user. Thanks to interchangeable blocks it is possible to customize the instrument for different applications, housing test tubes or microplates. The intuitive touchscreen allows the operator to view all program steps and monitor the entire process with a simple glance. - Best-in-class thermal performance thanks to advanced electronics and software. Up to 17°C below ambient temperature. - The intuitive touchscreen simplifies use and programming, with complete functions and help screens in six different languages, to assist the operator while using the unit - Easy creation of programs for repetitive applications. Memory for five different five-step programs. The USB port allows you to transfer test data to a flash drive for data collection and program storage Applications DNA, RNA, cell cultures, hybridizations, protein studies Display 4.3-inch (10.9 cm) color liquid crystal touchscreen (LCD) display, programmable in six languages Operation Detachable three-wire cable and plug (included). The unit requires a lock. Compatible with Eppendorf Thermomixer® R blocks Communication The USB port guarantees great flexibility in data collection and transfer Structure Cold-touch Valox construction, removable plastic rack, cover and screwdriver for block removal (included) Construction features Hot Cover Indicator, Audible Alarm, Maximum Temperature Limitation Function, Temperature Priority Function, Pulse / Fast Mix Mode, Temperature Calibration Mode, Temperature Rise Rate Function Technical Characteristics Specifications of the ISTHBLHTS model - Orbital movement, 3mm - Temperature calibration - USB - Brushless DC Motor Transmission - Heating rate (/min): 5°C/min - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Temperature accuracy (±): +/- 0.5°C between 20°C and 45°C; +/-2°C between 20°C and 45°C - Timer: from 1 second to 99 hours and 59 minutes

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the shakers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems.

Ohaus oscillating and undulating agitators OHAUS rocking and undulating shakers are designed for use (more) in a wide variety of laboratory applications. The rocking shakers feature a controlled rocking motion, while the wave shakers provide a mild three-dimensional wave motion with low foaming effect. Available in digital version and in the economical analog version. All models include a non-slip mat. As an accessory, a stacking tray is available to easily double the flow rate. - Easy adjustment of the angle of inclination and speed, for optimal mixing - Results reproducible with digital models. Precise adjustment of the angle of inclination in 1 degree increments with a decrease in speed up to 1 rev / min. and intuitive touch controls - The speed boost function allows you to gradually increase the speed to the desired setpoint to avoid splashing. A state-of-the-art motor and electronics allow you to maintain a regular oscillatory or undulatory movement. Applications Chemical extractions, mixing of blood samples, coloring gels, cell cultures, solubility studies Operation Detachable three-wire cable and plug (included) Structure Cold Rolled Steel (CRS) Construction features Integrated tray with non-slip rubber mat (included) Not sure which agitator to choose? Download the Open Air Agitator Selection Guide to get a quick overview of all available models.

WAVE Bioreactor is the ideal device for cell culture. Culture medium and cells contact only a preste (more)rile, disposable chamber called a Cellbag that is placed on a special rocking platform. The rocking motion of this platform induces waves in the culture fluid. These waves provide mixing and oxygen transfer, resulting in a perfect environment for cell growth that can easily support 10 x 10-6 cells / ml. The bioreactor requires no cleaning or sterilization, providing the ultimate ease in operation and protection against cross-contamination.

Shaking frequency: 20 – 300 rpm Shaking amplitude: 30 mm Shaking motion: orbital Timer: up to 60 min (more)utes, or continuous operation Max load: 15 kg Platform: 450 x 450 mm Dimensions (WxDxH): 510 x 625 x 142 mm Weight: 18 kg

The appliance is intended for the creation and maintenance of constant environmental conditions for  (more)application in the field of in vitro fertilisation (IVF), especially for the incubation of oocytes, spermatozoa and zygotes in special culture dishes for IVF application as well as for gene expression and the biosynthesis of RNA and proteins. Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program: 60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Max. number of internals: 10 (2 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

Sanyo MPR-513R Pharmaceutical Refrigerator This has twin sliding doors with double layer glass open  (more)to five shelving units inside the fridge. 5 pcs. drawers Items to be stored in the chamber must be placed on the drawers. To pull out the drawer, take out the drawer with pushing the button on the bottom of the drawer. The maximum storage weight for each drawer is 20 kg. 5 pcs. shelves Items to be stored in the chamber must be placed on the shelves. The maximum storage weight for each shelf is 20 kg. Temperature: +2°C to +14°C Volume : 486 Liter External dimensions : W900 x D600 x H1790 (mm) Interior dimensions : W800 x D465 x H1300 (mm) Net weight : 142 kg 230/240 V | 50 Hz | 1,4 A | 210 W This unit is in excellent working condition and very clean cosmetically. All functions in working order. Heats & cools with correct temperature. Feel free to contact with any questions.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW