Beckman Coulter Z1 Particle Counter with Controller Lab

2 x Becton-Dickinson Remote Pre Amp - BD Biosciences LSR II Boards These were removed from a univers (more)ity lab where they were surplus to requirements. They are in good cosmetic condition but have not been tested.

Beckman Coulter Z1 Particle Counter with Controller This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but has not been tested further. it is in good cosmetic condition with minor marks.

This BD Biosciences ACCURI C6 Cell Sorter System was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but as there were no software discs or testing solutions with it we had our service engineer observe the system initialising without the cover on. They reported that it initialised as it should. It is in very good cosmetic condition with only minor marks from use.

Miltenyi Biotec CliniMACS Plus Cell Sorter Separator Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility. Serial No. 002421Manufactured June 2021

The UF-100 is a fully automated urine cell analyzer using flow cytometry method combined with fluore (more)scent dye and electric resistance method to detects casts. This unit is further automated tham UA-1000/2000. All the process from mixing and aspirating of sample to output of analyzed parameters are performed automatically. Analysis includes quantitative analysis and flagging. Quantitative analysis measures: RBC, WBC, epithelial cells, casts and bacteria count (concentration) in the unit of µL or view field. Flagging marks: Path, CAST (casts containing organized structures),  SRC (small round epithelial cell), YLC (yeast liked fungi cell), X’TAL (crystal), SPERM (spermatozoa) and outputs the flagging informarion (information of their presence). Analyzed results are displayed on screen and if required printed by card type printer of color printer, and they are transmitted to a host computer. Dimensions (WxHxD): 600 x 705 x 606 mm Weight: 68 kg

Priorclave Autoclave Type - PS/MUA/C60 Lab This item was removed from a university where it was surp (more)lus to requirement. It is in good cosmetic condition and powers on, however it is not in working condition and is listed as Spares/Repair. It has a board/display fault.

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 256L (9.04 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 256L (9.04 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 9 shelves with a maximum chamber load of 661 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V is designed to provide exceptional precision and reliability for temperature-sensitive processes. With a working temperature range of 10°C above ambient to +250°C and a spacious 256-liter stainless steel interior, this oven is perfect for demanding laboratory and industrial applications. The TwinDISPLAY system, featuring two high-definition TFT-color displays, allows for precise control, while the adaptive multifunctional PID-microprocessor controller ensures accurate and uniform temperature management. Forced air circulation can be adjusted in 10% increments, with a pre-heated fresh air admixture, enhancing efficiency and temperature stability. This pass-through oven offers advanced safety features, including the AutoSAFETY system with integrated over- and undertemperature protection, along with visual and acoustic alarms. With support for up to nine shelves and a maximum chamber load of 661 lbs, the UF260TS can accommodate large samples or multiple smaller items with ease. Additional features such as the SetpointWAIT function, which ensures the process begins only after the set temperature is reached, and the HeatBALANCE function, which optimizes heating performance, make this oven a valuable asset for any lab or production environment. INCLUDED: The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Scilogex MicroPette Plus 8-Channel Autoclavable Pipettor, 5-50μlThe MicroPette Plus pipettes are ful (more)ly autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 8-Channel Autoclavable Pipettor, 5-50μl includes: - Two Year Manufacturer's Warranty