Welch 2510 Dry Vacuum Pump/Compressor

This Metaserv Cut-Off Machine Saw Model - C180 with 19A Pump was removed from a university engineeri (more)ng department where it was surplus to requirements. The department informed us that it was working prior to removal. The item powers on with both the pump and cutting machine working and is in a reasonable, used cosmetic condition. Included is, Metaserv Cut-off MachineModel - C180 Pump Model - C180/19A It comes with 7 spare Buehler abrasive cut-off wheels Metaserv unit dimensions - D50 W57 H43Tank - D46 W31 H31Stand on wheels - D62 W62 H90.5cm

This listing is for a Watson Marlow 520S Peristaltic Pump. The unit is in full working condition an (more)d is ready for immediate release. Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications.   520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging.   Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 micro-litres/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

Pumpdrive model 7544-20 (speed 20 rpm) Housing material: Polysulfone Rotor material: Cold-rolled ste (more)el Rollers: Three; cold-rolled steel Occlusion: Average, fixed mL/rev: Depends on tubing selected Accepted tubing: L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, L/S 18 Min flow rate: 0.06 mL/min (at 1 rpm with L/S 13 tubing) Max flow rate: 2300 mL/min (at 600 rpm with L/S 18 tubing)

This was removed from a laboratory where it was surplus to requirements. The unit powers up and draw (more)s suction. It is in good cosmetic condition with minor marks from use. Included with it is; 1x Glass Jar w/ Lid•1700 ccm

Dolomite Mitos P-Pump System With Remote Chamber 400 + Flow Rate Sensor This was removed from a univ (more)ersity lab where it was surplus plus to requirements. All units power up but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Included are; Includes: -Dolomite Mitos P-Pump-Dolomite Mitos Remote Chamber 400-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor-P-Pump user manual-Remote chamber 400 manual-Sensor manual P-Pump model number- 3200016_4P-Pump serial number- 1600680 Chamber serial number- 490174u7 Sensor serial number- 4903648

KNF IP65 UFEM 1.10 FT.18RCP2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to su (more)it most laboratory liquid metering and dosing needs. The UFEM 1.10 FT.18RCP2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant fluoropolymer flow path materials: PTFE head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduces flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 FT.18RCP2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VACUUBRAND PC 201 NT Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar Max. pumping speed at 60 Hz 2 (more).2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Manual vacuum control, analog vacuum display - Excellent environmental friendliness due to efficient solvent recovery This chemistry pumping unit has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens with high boiling solvents. The manual flow control valve regulates the effective pumping speed at the vacuum connection; the vacuum manometer offers an analog vacuum display. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The exhaust waste vapor condenser enables near-100-percent solvent recovery.INCLUDED: The VACUUBRAND PC 201 NT Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

RADWAG-manufactured susceptometer enables carrying out measurements of magnetic susceptibility and m (more)agnetization of weights of E1 and lower classes in accordance with OIML R111. Modular design, upon disassembling respective module, enables using the susceptometer as a mass comparator or a balance. Compared to the previous model, the new one features option of internal adjustment and higher readability: [d] 0.1 μg for loads ranging from 2 g to 50 kg.

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 100 mg Material: nickel silver M1 Class Mass Standards – Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Maximum Robustness The HRP high resolution scales are very robust. Their platforms are recognised to have an IP 67 level of protection. They feature additional sealing elements to protect against dust, dirt, and moisture and can thus be cleaned with a pressure washer. 9 advantages The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved RADWAG MonoBLOCK technology. The new – taller and larger – RADWAG MonoBLOCK has enabled the best repeatability and speed in the class of high-resolution industrial weighing platforms. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. For such industries as pharmaceutical, chemical, food and… HY10.HRP H scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. The HY10.HRP and HX7.HRP scales whose terminals are made of stainless steel can be used even in the most demanding wet environments. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, moduł wyjść analogowych, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, HY10 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of HY10’s working mods.