Watson Marlow pump head

This Edwards ECB8 Rotary Vane Vacuum Pump was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and has been fully tested by a service engineer. It is in full working order and did not require a service. It is in good cosmetic condition with minor marks.

This Pfeiffer Vacuum  Model - TMU 262 Turbomolecular Pump was removed from a university lab whe (more)re it was surplus to requirements. The unit has not been tested but is in good cosmetic condition with minor marks from use.

VACUUBRAND PC 3003 VARIO Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.12 Torr) Maximum (more) Pumping Speed 1.65 CFM at 60Hz Number of Heads/Stages 4/4 Features - VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Ideal for evaporation of high-boiling solvents even at low temperatures - Extraordinary diaphragm life for minimum operational and servicing costs - Excellent environmental compatibility through low energy consumption and efficient solvent recovery The PC 3003 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. With its high pumping speed and deep ultimate vacuum, this pump is suitable for demanding applications with high boiling point solvents in low temperature conditions. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary. And the VARIO control algorithm maintains the desired vacuum level without running the motor faster than necessary. This prevents bumping and foaming, makes the pump whisper quiet, and extends maintenance intervals. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. Typical applications are all evaporation processes. They can be run fully automatically by the integrated vacuum controller CVC 3000 resulting in both shorter process times and extra sensitivity at the same time. The excellent ultimate vacuum allows even high boiling solvents to evaporate at low temperatures. The VARIO® control ensures high process reliability through prevention of superheating or foaming. It detects boiling pressures of solvents fully automatically and adapts continuously the vacuum conditions to changing process parameters. All this without any need of parameter input or the use of a solvent library. In many other applications - like in local vacuum networks - the VARIO® control offers a significant advantage by supplying always the appropriate pumping speed. The VACUU·BUS® interface facilitates an user-friendly configuration of even complex vacuum installations.INCLUDED: The VACUUBRAND PC 3003 VARIO Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MD 1 Diaphragm Pump Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping Speed 0.82 CFM a (more)t 60Hz Number of Heads/Stages 4/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Excellent ultimate vacuum - Whisper quiet and ultra-low vibration - Proven long diaphragm life, maintenance-free drive system The MD 1 diaphragm pump is an excellent choice for oil-free evacuation and pumping of non-corrosive gases down to 1.5 mbar ultimate vacuum. The three-stage design with precisely guided flat diaphragms provides outstanding pumping speed even close to the ultimate vacuum, especially when compared with similarly rated two-stage diaphragm pumps. The MD 1 is an ultra-low vibration pump with very long diaphragm lilfetime and stable ultimate vacuum documented with years of testing. With a flow path consisting of aluminum and selected plastics (diaphragms and valves made of PTFE/FKM and FKM, respectively) the pumps are suitable for a wide range of applications with non-corrosive gases. The MD 1 is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases. It is suitable for high vacuum requirements at modest gas flow as often needed in physics and analytics. The pump is exceptionally quiet and reliable with long diaphragm and valve lifetimes. With its low ultimate vacuum and compact dimensions the MD 1 is widely used as replacement of rotary vane pumps. Typical applications are exhaust gas analysis, for degassing of small amounts of viscous media and in particular as backing pump for compact turbomolecular drag pumps. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. For equipment manufacturers customized versions are available.INCLUDED: The VACUUBRAND MD 1 Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VACFeatures -  (more)Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC SpecificationsPart NumberCA10A3T1-41AA1NCooling Capacity @ 20°C2.9 kWCooling Capacity @ 10°C1.93 kWCooling Capacity @ 0°C1.0 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements230V, 60HShipping Weight177 lbs / 80.3 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(9) { background-color: #fffacd; }

Polyscience 3860T56A1C0D Chiller 1.5HP Turbine Pump, Air-Cooled, 230V, 60Hz (-20C to 40C) Refrigeran (more)t R-404A Temperature Range -20° to 40°C Cooling Capacity 5000W @ 20°C Features - High capacity cooling for lasers, electron microscopes, and other laboratory applications - Small footprint conserves floor space - Displays temperature and pressure or flow rate simultaneously - User-adjustable temperature, pressure, and flow rate alarms - Simple operation and low maintenance DuraChill Chillers offer powerful cooling for demanding applications and serve as a cost-effective alternative to tap water cooling systems. Equipped with a microprocessor-based controller, these chillers provide a digital temperature display (in °C or °F), one-touch set point display, and a digital pressure/flow rate display (in PSI, kPa, GPM, LPM) with easy push-button selection. The inclusion of a modulated refrigeration system enhances cooling efficiency and performance, resulting in improved temperature stability and extended compressor life. With its high-capacity cooling capability, the 3860T56A1C0D is ideal for applications involving lasers, electron microscopes, and other laboratory equipment. The system features dual displays, allowing users to conveniently monitor temperature and process pressure or flow rate simultaneously. User-adjustable alarms for temperature, pressure, and flow rate enable precise control and monitoring. Despite its powerful performance, the chiller has a small footprint that conserves floor space and facilitates seamless integration into laboratory setups.INCLUDED: The Polyscience 3860T56A1C0D Chiller 1.5HP Turbine Pump, Air-Cooled, 230V, 60Hz (-20C to 40C) includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Designed for medical applications, the UP-D897 is a light, compact monochrome digital graphic printe (more)r that succeeds the popular UP-D895. Proven Sony direct thermal printing technology can deliver crisp, high-quality A6-size prints in approximately two seconds. A jog dial and LCD display on the front panel allow quick, easy adjustment of printer settings. Simple digital connection is via Hi-Speed USB 2.0 interface. Printing Method: Direct thermal printing Resolution: 325 dpi Gradations: 8 bits (256 levels) processing Picture Elements: 4096 x 1280 dots Picture Area: 320 x 100 mm Paper Size: Paper width of 110 mm Printing Time High-speed mode: Approx. 2 seconds/ image (960 x 1,280 dots) Printing Time Normal speed: Approx. 3.3 seconds/ image (960 x 1,280 dots) Picture Memory: 4096 x 1280 x 8 (bit) Interface: Hi-Speed USB (USB 2.0) (x1) Dimensions (WxHxD): 1154 x 88 x 240 mm Weight: 2.6 kg

IKA C 3000 Automated Calorimeter Package 1/10 Measuring Range Max. 40000 J Reproducibility Dynamic ( (more)1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Easy handling via touch screen operation or standard USB mouse - Two choices of starting temperatures (22°C, 30°C) - Automated ignition, water filling and draining and oxygen filling - Several interfaces: Ethernet, RS 232, USB, SD card slot - Six temperature sensors to monitor all temperatures allowing best analysis - Spherically shaped decomposition vessel for better pressure stability and faster heat transfer - Easy sample preparation due to new crucible holder technology - Can be operated with a chiller (e.g. RC 2 basic) The IKA C 3000 Automated Calorimeter Package 1/10 is a state-of-the-art isoperibol calorimeter designed to streamline calorific value measurements with exceptional precision and ease of use. As the advanced successor to the C 2000 model, it introduces cutting-edge features such as fully automated ignition, water handling, and oxygen filling, significantly reducing manual intervention. The intuitive touch screen interface, along with optional USB mouse operation, ensures seamless user interaction, making it an excellent choice for both experienced professionals and newcomers in industrial laboratories. This calorimeter offers unmatched performance with dual starting temperatures (22°C and 30°C), six integrated temperature sensors for precise monitoring, and a spherically shaped decomposition vessel that enhances pressure stability and heat transfer. Capable of achieving up to six dynamic measurements per hour with 0.15% RSD and four isoperibol measurements per hour with 0.05% RSD, the C 3000 excels in efficiency and accuracy. Its robust construction and compliance with globally recognized standards like ISO 1928, ASTM D240, D4809, D5865, and GB T213 make it a reliable solution for critical applications in the power and cement industries. Equipped with advanced data management capabilities, the C 3000 includes Ethernet, RS232, USB, and an SD card slot for flexible connectivity and export options. Additional features such as compatibility with the RC 2 Basic chiller, an upside-down crucible holder for easy sample preparation, and a high-temperature resolution of 0.0001 K further enhance its usability and versatility. Designed to meet the demanding needs of industrial laboratories, the IKA C 3000 Automated Calorimeter Package 1/10 delivers consistent, accurate results, making it an indispensable tool for energy analysis and quality control. INCLUDED: The IKA C 3000 Automated Calorimeter Package 1/10 Handling includes: - C 3000 Measuring Cell - C 6010 decomposition Vessel, Standard - RC 2 Basic Recirculation Chiller - Wear Parts and Consumables for Up to 500 Tests - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

Benchmark Incu-Shaker Mini CO2 Shaking Incubator Ideal for the culturing of non-adherent cells, the  (more)Incu-Shaker CO2 Mini combines a precision CO2 incubation chamber with an integral orbital shaker, providing the optimum conditions for suspension cell culture. With Benchmark's unique and proprietary heat distribution technology, the incubator provides the highest levels of temperature accuracy with minimal fluctuation (within 0.1C). The six-side heating system in combination with a low speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample to sample contamination. A beltless motor drive provides a horizontally circular shaking motion at a consistent 19mm orbit. The included platform (9.5 x 11.5 in.) can be used for low speed shaking of a variety of laboratory vessels, including Erlenmeyer flasks, culture plates and media bottles. For high speed mixing, a patented MAGic Clamp platform is available that allows for magnetic attachment of flask clamps and tube racks. INCLUDED: The Benchmark Incu-Shaker Mini CO2 Shaking Incubator includes: - 9.5 x 11.5 in Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty