Watson Marlow 313S Peristaltic Pump

This listing is for a Scilog Tandem 1081 Peristaltic Pump. The unit is in full working condition an (more)d is ready for intimidate realese.

This listing is for a Pall Allegro 1/2" Single Use TFF System.The unit is in full working condition  (more)and is ready for immediate release.This Unit is fitted with a Ismatec Flowmaster FMT 300 peristaltic pump.This unit is supplied with Trolley and containers.The Pall Allegro 1/2" Single Use TFF System is a cutting-edge solution designed specifically for tangential flow filtration (TFF) in bioprocessing applications, combining innovative single-use technology with user-friendly design. Unlike traditional TFF systems, the Allegro system incorporates new concepts that enhance ease of use and efficiency, featuring a carefully considered layout that allows full access to components from one side.Key Features:Single-Use Design: Eliminates cross-contamination and cleaning requirements, enhancing system flexibility and ensuring a sterile environment.Integrated Sensors: Equipped with single-use sensors that track key process parameters, provide notifications for out-of-spec conditions, and enable automated control for optimal processing.Easy Setup: Comes with five pre-irradiated manifold sets (feed, retentate, permeate, bio container, recovery) that are ready for installation, typically taking just 20 minutes.Automated Operation: Fully automated for monitoring and controlling critical parameters, ensuring consistent performance throughout ultrafiltration and diafiltration processes.Technical Specifications:Capacity: Features a recirculation pump with a capacity of 1,000 L/hour, designed to accommodate 0.5 - 2.5 m² cassettes running at a crossflow of 5 L/min/m².Versatile Connections: Easily connects to Allegro 2D and 3D bio containers for WFI, diafiltration buffer, and process fluid in fed batch operations.Temperature Control: Includes a heat exchange plate under the retentate bio container to manage product temperature, either cooling or heating as needed.Applications:Ideal for concentration and diafiltration of proteins, recombinant molecules, potent biological drugs, cytotoxic drugs, and vaccines, the Pall Allegro system stands out as a reliable and efficient choice for modern bioprocessing needs.Brochure- http://g-eitan.com/pdf/Biotechnology/Ultrafiltration%20-%20TFF/Single%20use%20cross%20flow%20system/SingleUseTFF.pdf

This listing is for 1 of 4 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immediate release. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the bench top.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pump heads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pump heads if lower pulsing is required, or with 313D2 or 314D2 pump heads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) micro-cassette pump heads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pump head. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)

Cole-Parmer Masterflex 7521-47 Peristaltic Pump with Dual Easyload 7518-10 Pump Heads Manufacturer:  (more)COLE PARMER Maximum speed of 600 rpm. Voltage: 220-240V Current: 1.5A Console Player Type: Masterflex Model 7521-47 Pump head type: 2 Masterflex Easy-load 7518-10 heads External dimensions (L) x (D) x (H): 40 x 19 x 19 cm

Manufacturer: Thermo Scientific Model: MiniSipper Option for Helios Spectrometer (Helios Alpha & Bet (more)a; Helios Gamma & Delta) Description: Whatever your future analytical requirements or workload, the choice of accessories like optional MiniSipper will enable you to meet your analytical goals and make your job easier. Features and Specifications: - Fast and reliable peristaltic pump-based sample-introduction systems- Provide high sample throughput- Suitable for large sample batch processing or simply for convenience- Operate with 1 – 50 mm pathlength flowcells- Software control of tubing calibration, programmable airgap, pumping mode and sample volume- Exceptionally low cross contamination; < 0.5% at 0.5 ml Items delivered: - Thermo Scientific MiniSipper Option for Helios Spectrometer  (please see pictures for details) Condition: The MiniSipper is in very good cosmetical condition. It is 100% functional tested and ready to be applied.

Agilent Technologies 6890N GC System with 7683B Series Injector &amp; 5973 Mass Selective Detector T (more)his system was removed from a university laboratory where it was surplus to requirements. All components are in working order and in good cosmetic condition. The system was professionally serviced and reported to be in full working order. - The full service report is available on request. Components: - Agilent Technologies 6890N Network GC System - Model: 6890N - Serial No.: CN10521049 - Agilent Technologies 5973 Mass Selective Detector - Model: 5973 - Serial No.: US52040176 - Agilent Technologies 7683B Series Injector - Model: 7683B - Serial No.: CN51132482

Applied Biosystems Veriti 96 Well Thermal Cycler Lab Spares/Repairs This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition but does not power on, therefore, it is listed as Spares/Repair.

Gas chromatograph Hewlett Packard 6890 Series. Detectors mounted FID and ECD. Injection system "spli (more)t/splitless". Suitable for the detection of cannabinoids, terpenes, pesticides, solvents, aromatic components, among others. Detection times are very stable. Software ChemStation or Clarity to comply with CFR21 Part 11 (+ € 1,500), required for IQ / OQ. PC. Includes user manuals. Agilent Technologies - 6890 opt. 211 Flame Ionization Detector (FID) Manual (click here)

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Corepoint Scientific LF171WWW-0HC -15C to -20C Single Swing Solid Door Freezer Temperature Setpoint  (more)Range -15°C to -20°C Capacity 17 cu. ft. Defrost Method Auto Features - Corepoint Scientific™ General Purpose Auto Defrost Hydrocarbon - 4 adjustable shelves - High density urethane foam cabinet and door insulation - Magnetic door gasket for positive seal - Heavy duty door handle The Corepoint Scientific LF171WWW-0HC Single Swing Solid Door Freezer is designed for robust, energy-efficient performance in laboratory, clinical, or industrial settings. Offering 17 cubic feet of storage, it maintains temperatures from -15°C to -20°C with a mechanical thermostat for precision. Features include auto-defrost functionality that reduces maintenance while ensuring a frost-free interior, high-density urethane foam insulation for enhanced energy efficiency, and four adjustable shelves for flexible storage options. The freezer's exterior is made of durable powder-coated steel, and it includes leveling legs for stable placement. Additionally, it uses eco-friendly R600a refrigerant and adheres to UL471 standards with a NEMA 5-15P power plug, making it a reliable and safe choice for demanding environments. INCLUDED: The Corepoint Scientific LF171WWW-0HC -15C to -20C Single Swing Solid Door Freezer includes: - 4 Adjustable Shelves - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty