Varian 9190103 StarCell Vacuum Ion Pump HVAC UHV Lab

This listing is for a Watson Marlow 520S Peristaltic Pump. The unit is in full working condition an (more)d is ready for immediate release. Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications.   520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging.   Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 micro-litres/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

Agilent HS 602 Rotary Vane Vacuum Pump This item was removed from a university laboratory where it w (more)as surplus to requirements. The vacuum pump powers on, with the status light changing from red to green as the pump speed increases. It operates smoothly, with no unexpected noises or vibrations. Includes: - Oil Exhaust Filter NW25 Model: 749-9365R002Serial No.: IT1328A241

KNF Neuberger Laboport Diaphragm Pump N 840.3 FT .18 This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

VACUUBRAND MD 12 NT Diaphragm Pump Ultimate Vacuum 2 mbar (1.5 Torr) Maximum Pumping Speed 7.1 CFM  (more)at 60Hz Number of Heads/Stages 8/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Reduced process times - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs The MD 12 NT diaphragm pump is an especially powerful pump for oil-free evacuation and pumping of non-aggressive gases. The three-stage design of this eight-cylinder pump provides the advantageous combination of very high pumping speed and excellent ultimate vacuum. The flow path consists of aluminum, stainless steel and carefully selected plastics to permit a wide range of applications. The fabric-reinforced double diaphragms are made of highly flexible FKM for extended operating life and high vacuum performance. Eight-cylinder NT pumps feature quiet operation, with smooth and easy-to-clean surfaces. Like all VACUUBRAND diaphragm pumps they operate absolutely oil-free and do not have any sliding components in the gas path. In normal operation they are completely free of abrasion. This eliminates most of the particulate impurities frequently generated inside of scroll or piston pumps. The MD 12 NT is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases, especially for applications in physics and analytics. Due to the very good ultimate vacuum the MD 12 NT is often used as an alternative to rotary vane pumps, for example for vacuum ovens, for very quick and efficient degassing of viscous media, exhaust gas analytics and especially as backing pump for large turbomolecular drag pumps. The particularly high pumping speed enables the usage of bigger vacuum apparatus and with high gas throughput. The pump is extraordinarily silent and exhibits very low vibration making it an excellent choice for sensitive equipment such as electron microscopes. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. INCLUDED: The VACUUBRAND MD 12 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Pfeiffer MVP 020-3 Diaphragm Pump Final Pressure 2 hPa / 1.5 Torr / 2 mbar Maximum Pumping Speed 1. (more)4 m 3/h / 0.82404 cfm / 23.3338 l/min Number of Heads/Stages 2/3 Features - Diaphragm pump with a pumping speed of up to 1.4 m3/h - No hydrocarbons: Completely dry & oil-free diaphragm pump - Low noise level, minimal vibrations and compact design, ideal also for use in laboratories - Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals - Suitable for all voltages worldwide The Pfeiffer MVP 020-3 Diaphragm Pump represents the pinnacle of performance in vacuum technology, offering a robust solution for demanding laboratory environments. With a pumping speed that reaches up to 1.4 m³/h and compatibility with all global voltage standards, this diaphragm pump ensures a seamless and powerful operation across a variety of applications. The MVP 020-3 is completely dry and oil-free, eliminating contamination risks and reducing maintenance requirements. This pump is designed with user convenience in mind, featuring a compact and low-vibration operation that produces only 48 dB(A) of noise, making it one of the quietest in its class. It's engineered for reliability with short maintenance intervals and long maintenance times, significantly lowering operating costs. Additionally, the MVP 020-3 comes with an integral leak rate of 1 Pa m³/s, and it can handle intake and exhaust pressures up to 1,100 hPa. Certified according to UL/CSA 61010-1 standards and equipped with a gas ballast as an optional accessory, this pump is suited for a wide range of applications, from basic laboratory tasks to complex industrial processes. INCLUDED: The Pfeiffer MVP 020-3 Diaphragm Pump includes: - Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards XDS46i Dry Scroll Pump Ultimate Vacuum 5 x 10-2 mbar Inlet Connection NW40 Displacement 60 m (more) 3h-1 / 35 ft3min-1 Features - XDS scroll pumps provide dry, clean vacuum solutions, setting the standard for robust and efficient performance - Isolates the vacuum environment from all forms of lubricant, ensuring a hermetically sealed operation that prevents contamination - Offers a displacement of 60 m³/h and a peak pumping speed of 40 m³/h, ensuring high performance in demanding environments - Capable of handling maximum continuous inlet pressure of 40 mbar (30 Torr) and maximum continuous outlet pressure of 0.2 bar gauge - With a weight of 48 kg (105 lbs) and a noise level of 55.4 dB(A), it operates quietly and efficiently within a temperature range of 10 to 40 °C - Ensures reliability with a leak tightness of <1 x 10⁻⁶ mbar ls⁻¹ - Equipped with NW40 inlet flange and NW25 exhaust flange for easy integration into various systems XDS scroll pumps have become industry standard when dry pumping is essential, proving to be a robust and clean vacuum pump solution in a range of applications and processes. The XDS35i pump has an innovative bearing shield that isolates the vacuum environment from all forms of lubricant, making it not only lubricant-free but hermetically sealed. XDS35iNGB variant has had the gas ballast feature removed for applications such as rare gas recirculation and gas recovery. The XDS46i shares many of the same features of the XDS35i but with a peak speed of 40 m3h-1. The pump has been optimised for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar, making it ideally suited for LCMS and ICPMS applications requiring higher pumping speeds. The C variant has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications using corrosive substances. The C version is fitted with Chemraz® internal valve pads and stainless steel exhaust port.INCLUDED: The Edwards XDS46i Dry Scroll Pump includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Magnetic stirrer heating BIOBLOCK SCIENTIFIC AM 3001 K Model: AM3001K / AMC BBS 3001K Technical char (more)acteristics: 230 V, 50-60 Hz, 625 W. Temperature range: 0…350 ºC. Rotation speed: 100-1250 rpm. Heating plate dimensions: Ø 14.5 cm. The stirrer is in good working order. Average aesthetic condition

Temperature Range: Ambient +5°C to 130°C Heating Rate: ≤ 25 min. 30° to 130°C Block capacity: 4 (not (more) included) Temperature Accuracy: ≤ ± 0.5°C Temperature Uniformity: ≤ ± 1°C Timer: 0 to 99:59 min or continuous Dimensions (LxWxH): 450 x 200 x 100 mm Weight: 4.7 kg

Balance of the AS R2 PLUS series is a standard analytical weighing device of the SYNERGY LAB line. T (more)he AS R2 PLUS is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS R2 PLUS analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Levelling System Standard AS R2 PLUS balances are equipped with a levelling device located at the front of the weighing chamber, which facilitates level control. Levelling operation is now simplified and easier due to the reduced quantity of adjustable supporting points (2 points). Intuitive Operation Balances are equipped with LCD display ensuring clear presentation of the weighing result. Direct access to functions and databases is possible via the following keys: Database – direct access to databases, Function – direct access to basic functions, F1-F4 – programmable function keys and menu navigation keys. AS R2 PLUS analytical balances signal operated working mode, computer connection, weighing and service functions via pictograms. The quantity of displayed weighing units is also expanded. Dedicated status bar enables display of additional messages, e.g. product name, tare value. Real-time mass measurement is presented using bar graph. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. Data Protection Access to valuable information is possible after logging. The administrator manages the data access configuration. ALIBI Memory Data safety is ensured by the ALIBI memory integrated into AS R2 PLUS balances, which enables record of up to 100 000 weighings. ALIBI guarantees continuity of data collection over a long period of time. Databases The information system is based on 5 databases, which allows several users to work with several product databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: operators (up to 10 users), products (up to 1000 products), weighings (up to 5000 weighings), tares (up to 100 tares), ALIBI memory (up to 100 000 weighings). Communication Interfaces The functionality of AS R2 PLUS balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, Wi-Fi (option). Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Accuris PR2120-H-1000 qMAX Green One-Step RT-qPCR Kit, High Rox, 1000 Reactions The qMAX Green One-S (more)tep RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysin which intercalating dye-based detectionprovides the option of a post amplificationmelt profile. The mix is powered by HSTaq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Green One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Includes 10x1ml reaction mix, 10x100µl RTase - Manufacturer's Documentation - 2 Year Manufacturer's Warranty