Vacuum pump KNF N035.3 AN.18

Technical features Flow rate (max.) 34 l / min Final vacuum (max.) 2 mbar (abs.) Pressure (max.) 1 b (more)ar (rel.) Permissible fluid temperature 5-40°C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PTFE Applications Drying Rotary evaporation Centrifugal concentration Distillation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Chemically resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This listing is for 1 of 2 QuattroFlow QF15ACUEGN-UK Single-use Pump Diaphragm Pump. The unit is in (more) full working condition and is ready for immediate release. The QuattroFlow QF150 Diaphragm Pump is an efficient, 4-piston pump designed for handling water-like fluids in various sectors, including pharmaceuticals, biotech, food, and cosmetics. Here’s a detailed overview of its features, specifications, and applications: Key Features: Flow Rates: Max Flow Rate: 3° Eccentric Shaft: Up to 100 l/h (1.67 l/min) 5° Eccentric Shaft: Up to 180 l/h (3 l/min) Min Flow Rate: Both shaft angles start at 1 l/h (0.017 l/min). Pressure Ratings: Maximum operating pressure of 6 bar (87 psi) for fluids < 40°C; 4 bar (58 psi) for fluids > 40°C. Temperature Ratings: Maximum fluid temperature: 80°C (176°F). CIP (Clean-in-Place) and SIP (Sterilize-in-Place) capable up to 90°C (194°F) and 130°C (260°F), respectively. Suction Lift: 3° Shaft: 1-1.5 m (3.2-4.9 ft) 5° Shaft: 2-3 m (6.6-9.8 ft) Volume Specifications: Approximate volume per revolution: 3°: 0.72 ml 5°: 1.2 ml Total filling volume (without connectors): 15 ml. Material Construction: Wetted Materials: SS316L (pump housing, valve plate), Santoprene (diaphragms), EPDM (valves, O-rings). Non-Wetted Materials: SS316L for bearing housing and base plate. Dimensions and Weight: Length: 257 mm (10.2 in); Width: 164 mm (6.5 in); Height: 185 mm (7.2 in); Weight: 9.8 kg (22 lb). Slight variations in dimensions and weight depending on models. Advantages: Versatility: The QF150 can handle a wide range of fluids, including: Biological Solutions: Proteins (e.g., IgG, monoclonal antibodies), enzymes, and vaccines. Suspensions and Polymers: Silicon, latex, and chromatography media. Cell Suspensions: Bacteria, yeast, algae, and mammalian cells. Food Products: Dairy products and gelatine. Low-Shear Design: Ensures gentle handling of sensitive materials, maintaining their stability and functionality. CIP/SIP Capable: Facilitates easy cleaning and sterilization, crucial for maintaining hygiene in production environments. Compact and Lightweight: Easy to integrate into laboratory or production settings without occupying much space.

Gilson MiniPuls 3 peristaltic pump Technical characteristics Voltage: 220-240V, 50/60Hz Power: 45VA  (more)Speed: 0-48 revolutions 8 channels Standard flow rate: 0.3 µL/min – 30 mL/min at maximum pressure 0.5 MPa Pump head speed: adjustable 0 to 48 rpm with increments 0.01 rpm to 9.99 rpm and increments 0.1 rpm to 10 rpm Standard model pipe diameter: 0.25–4 mm (ID) External dimensions (L) x (D) x (H): 15 x 17.5 x 29.5 cm

Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C,  (more)5200W, 230V 60HzDuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or °F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C, 5200W, 230V 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5200W, 230V 60Hz SpecificationsKey SpecificationsDescription1.5 HP Chiller, Positive Displacement; Air-CooledDisplayLEDConnectivityOptional: RS232, RS485Working Temperature Range °C5° to 35°Temperature Stability °C±0.5°Temperature Calibration Capability1-pointPump TypePositive Displacement 60 Hz OnlyPart Number6860P46A270DMaximum Pressure (psi)100.0Maximum Pressure (bar)6.90Maximum Pressure Flow Rate (gpm)3.50Maximum Pressure Flow Rate (l/min)13.2Cooling Capacity @ +10°C (W)4420Cooling Capacity @ +20°C (W)5200Cooling Capacity @ +30°C (W)5980Heater Wattage1000Electrical Requirements (VAC/Hz/Ph/A)230/60/1/21.1Regulatory ApprovalsTUVDownloadsTechnical Specification Download Operator's Manual Download

This listing is for 1 of 2 Watson Marlow 505S Peristaltic Pump. The unit is in full working conditi (more)on and is ready for immediate release. Experience precision and reliability with the Watson Marlow 505S Peristaltic Pump, expertly designed for the safe transport of liquids while maintaining a contamination-free environment. Ideal for delivering culture media, buffers, and various solutions, this versatile pump is a valuable addition to any laboratory. Key Features: Variable Rotor Speed: With a rotor speed range of 2-220 rpm, the 505S allows for customizable flow rates to suit your specific application needs. Compact Design: Measuring just 25 x 30 x 12 cm, this pump's compact size makes it perfect for laboratory settings where space is at a premium. Flexible Electric Supply: Compatible with both 100-120V and 220-240V power sources at 50/60Hz, ensuring versatility in different laboratory environments. Technical Specifications: Manufacturer: Watson Marlow Benefits: Contamination-Free Operation: The peristaltic design ensures the liquid only comes into contact with the tubing, protecting both your samples and the pump from contamination. Versatile Applications: Whether you're working with culture media, buffers, or other solutions, the 505S is designed to handle a wide range of laboratory tasks efficiently. Accessory Options: Enhance your pump's capabilities with various pump head options, such as the 508MC2 Eight Roller Two Channel Micro Pump head and the Easy Load Drive Head, allowing for even greater adaptability. Choose the Watson Marlow 505S Peristaltic Pump for a dependable, high-performance solution that meets the demands of your laboratory. Achieve consistent results and streamline your liquid handling processes with this exceptional peristaltic pump.

Advanced refrigerator for the safe storage of samples in the scientific and medical sector - Complet (more)e display and multifunction electronics with alarm system: adjustable minimum and maximum, backup battery for data logging during power failure - One-piece construction with lifetime anti-corrosion warranty; high quality polypropylene for effective insulation and simple maintenance and cleaning - Intelligent ergonomics: easier and safer handling thanks to the positioning of the heaviest components at the bottom - High storage capacity: very versatile interior thanks to multiple intuitive guides that allow modularity STAY QUIET AND WORRY-FREE THANKS TO THE RELIABILITY OF B MEDICAL SYSTEMS - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - High performance compressor for greater energy efficiency - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity - Automatic internal LED lighting for lower energy consumption COMFORT OF USE AND DURABILITY - Easy access to parameters on a 7' touchscreen with temperature display - NFC card/password protected door lock mechanism - USB port and SD card slot for easy data export - Antibacterial coating for easy hygiene control - Silent device - Low heat emission - Modular internal equipment - Easy access to lower drawers - Stainless steel and other high quality materials for durability PREMIUM Technology: New B Medical Systems 7" touchscreen display integrated into the door handle with pre-installed connection enabling unique monitoring capabilities; simplified door lock mechanism, with a large, heavy-duty handle; access/lock the opening using an NFC card; USB port and SD card slot. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Barnstead Genevac miVac Duo Concentrator DUC-23050-A00 This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in full working to 1400rpm, and the heating function is also working. It has not been tested under a vacuum. It is in good cosmetic condition with minor marks form use. There is some cosmetic crazing on the lid.

Agilent 1100 Quat Pump (G1311A). It ensures virtually pulse-free and stable solvent flow, with dual  (more)floating pistons in series, precisely servo-controlled. Setable Flow Range: 0.001 – 10ml/min – in 0.001ml/min increments. Flow Range: 0.2 – 10.0 ml/min. pH Range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel. Formation: Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve. Delay volume 800-1100µl, depending on back pressure.

BIOBASE BK-Y-800 mobile equipment for air disinfection by germicidal ultraviolet (UV) light. Efficie (more)nt sterilization of bacteria and viruses allowing people around them to stay. Suitable for beauty salons, schools, bars, entertainment venues, offices, etc. Two working modes: sterilization and ozone supply. Sterile air outlet through two channels in all directions. It has a particle filter and activated carbon for air purification. LED display UV lamp life indicator. Cleaning and maintenance reminder. Programmable. Auto-off function. Remote and manual control. Three speeds of air expulsion. Disinfection space: up to 80m3. Air recirculation: 800 m3 / h depending on model. UV radiation intensity inside the machine: 6 × 1800um / cm2. UV radiation intensity inside the machine: 6 × 1800um / cm2. UV lamp life ≥5000h. Negative ions generated (ozone): ≥6 × 106 / cm3. Ozone concentration at 20 cm from the machine 0.0074 mg / m3.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.