Sysmex PU-15 Pneumatic Pump

This Varian TV-301 Navigator Turbomolecular Pump was removed from a university lab where it was surp (more)lus to requirements. We have tested this turbo pump using an Avian Turbo V-250 controller, Two stage vacuum pump and Edwards penning gauge for 30 minutes (Not included). It runs smoothly and achieved the pressure of 1x10^-5 mtorr with our set up. It is in great cosmetic condition with only minor usage marks.

Dolomite Mitos P-Pump System With Remote Chamber 400 + Flow Rate Sensor This was removed from a univ (more)ersity lab where it was surplus plus to requirements. All units power up but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Included are; Includes: -Dolomite Mitos P-Pump-Dolomite Mitos Remote Chamber 400-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor-P-Pump user manual-Remote chamber 400 manual-Sensor manual P-Pump model number- 3200016_4P-Pump serial number- 1600680 Chamber serial number- 490174u7 Sensor serial number- 4903648

VACUUBRAND MZ 2C VARIO Select Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pump (more)ing Speed 1.65 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU-SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Extraordinary diaphragm life for minimum operational and servicing costs - Excellent chemical resistance The MZ 2C VARIO select pump is an excellent solution for labs working with most common solvents. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU-SELECT controller detects the boiling pressure and automatically adjusts the pump to maintain process control. On-demand motor speed control yields not only improved vacuum control, but it also results in unparalleled service intervals for wear parts like diaphragms and valves. Typical applications are all evaporation processes. Evaporation processes can be run fully automatically and with short process times and high sensitivity at the same time. The VARIO control ensures high process reliability through prevention of superheating or foaming. The control allows for automatic vacuum level adaptation and is self-adapting to changing process parameters at any time. The VACUU-BUS interface facilitates a user-friendly configuration of even complex vacuum installations. INCLUDED: The VACUUBRAND MZ 2C VARIO Select Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Pfeiffer HiCube 300 Neo, 100 ISO-K, MVP 030-3 Turbo Pumping Station Final Pressure 1 x10-7 hPa / 7. (more)5 x 10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 260 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 300 Neo, 100 ISO-K, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution for all high vacuum applications. It offers simple operation through a 7-inch touch display and can be controlled remotely via a web server, making it highly versatile and user-friendly. Designed for reliability, it operates with a final pressure of 1 x 10⁻⁷ mbar and a pumping speed of 260 l/s for nitrogen. The backing pump, the MVP 030-3, delivers a pumping speed of 1.8 m³/h at 50 Hz, ensuring efficient performance. This turbo pumping station uses air-cooled forced convection to maintain optimal conditions and operates quietly with a sound pressure level of ≤50 dB(A). Its HiPace 300 turbopump and DN 100 ISO-K connection flange make it compatible with a variety of applications. Built to work worldwide, it supports input voltages ranging from 100-240 V AC. Weighing 20.5 kg, it is robust and reliable, offering consistent performance in environments with ambient temperatures from 5 to 40°C. INCLUDED: The Pfeiffer HiCube 300 Neo, 100 ISO-K, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nEXT240T HC - CF100 160W Turbomolecular Pump Ultimate Vacuum <5x10-10 mbar Inlet Connecti (more)on DNISO100-K Pumping Speed Nominal 1439.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for improved performance - Offers direct I/O or serial control; compatible with TAG and TIC controllers for system integration - Oil cartridge and bearings can be replaced in the field with minimal tools - Features multiple drag stages for enhanced compression ratios and increased backing pressure tolerance - Suitable for a variety of demanding applications including high-energy physics, electron microscopy and industrial development - Features a patented bearing suspension system to reduce noise and vibration transmission to the vacuum system - Includes a purge port for safe operation with specialized gases - The permanent magnet upper bearing ensures a hydrocarbon-free environment, reducing contamination The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240T HC - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

The CliniMACS Prodigy represents the next generation in automated cell processing. This device offer (more)s advanced integrated solutions to streamline cell processing workflows – from cell separation through cell culture to formulation of the final product. The CliniMACS Prodigy offers a flexible platform for cell processing applications enabling the magnetic separation of different cell types as well as customized cell processing protocols. The cell processing unit for fully automated washing, fractionation and cultivation of cells represents an integral component of the device. These processing steps take place in a single-use chamber, which is included as part of specific CliniMACS Prodigy Tubing Sets. The magnetic cell separation unit comprises a second integral component, enabling the separation of virtually any cell type. Pump speed: 2 – 400 mL/min Atmosphere control: Gas mix unit for CO2, compressed air, and N2; min. pressure: 1 bar, max. pressure: 2.5 bar Temperature control: +4 °C to +38 °C Centrifugation: Max. 2,500 rpm (400×g) Microscope camera: Max. magnification: 400-fold MACS tube sealer: For sealing CliniMACS Prodigy Tubing Sets PVC tubes Types of starting material: Leukapheresis, bone marrow, cryopreserved PSCs Available cell processing steps: Cell washing, density gradient centrifugation, cell activation, fluorescent antibody labeling of cells, cell depletion and / or enrichment via magnetic cell separation, viral transduction, cell expansion, expansion and differentiation of adherent cells, cell culture and medium exchange, formulation of final cell product Dimensions (WxDxH): 735 x 400 x 480 mm Weight: 70 kg

Pipette tips 100 μL with filter GILSON DF100ST Diamond, sterile, rack of 96 pieces. You can also eas (more)ily order PIPETTES and/or PIPE HOLDERS  . Volume: 10 – 100 µL Rack of 96 pieces Color code: Yellow Length: 51 mm High quality PP Sterile With filter

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

Ohaus 30400170 Modular Heat Block, 64 x 0.2 mL PCR Tubes The Ohaus 30400170 Modular Heat Block, 64 x (more) 0.2 mL PCR Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400170 Modular Heat Block, 64 x 0.2 mL PCR Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Crest Ultrasonics Mesh Basket for P1800 Ultrasonic Cleaner The Crest Ultrasonics Mesh Basket for P18 (more)00 Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The Crest Ultrasonics Mesh Basket for P1800 Ultrasonic Cleaner is 19" in length x 10.75" in width x 5" in depth and is for use with the P1800 Ultrasonic Cleaners. The Crest Ultrasonics Mesh Basket for P1800 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.