Pfeiffer HiCube 80 Neo, 40 KF, MVP 030-3 Turbo Pumping Station

The N 840.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow Rate (max.) 34 l / min Ultimate Vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Permissible Medium Temperature 5-40°C Valve Material FFPM Diaphragm Material PTFE coated Pump Head Material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This Varian TV 81-T Turbo Turbomolecular Pump Model 9698905M001 was removed from a university lab wh (more)ere it was surplus to requirements. The pump has been tested with a controller (not included) and is in working order, but has not been tested under a vacuum. It is in good cosmetic condition with minor marks from use.

Heidolph Rotavac Vario Control, 115VEven if the gas ballast valve is open an excellent ultimate vac (more)uum is reached when working with easily condensable vapors. This makes distilling high boiling point solvents such as DMF or DMSO possible at low bath temperatures. For use with Hei-VAP Expert Control / Hei-VAP Ultimate Control. Condenser is not in scope of delivery. Features: - Highest distillation rates possible and reducingprocess time by 30% - Solvent recovery of up to 99% - Once the required vacuum is reached, thepump automatically stops and reliably keepsthe vacuum at the desired level - Minimized runtime saves energy andsignificantly increases the lifespan of thediaphragm - These pumps guarantee minimum noise andvibrations during operation - Rpm-regulated pumps achieve the mostprecise vacuum INCLUDED: The Heidolph Rotavac Vario Control, 115V includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

VACUUBRAND MZ 1C Chemistry Diaphragm Pump Ultimate Vacuum 12 mbar / 9 torr Maximum Pumping Speed 0.5 (more) cfm at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - Convenient, quick and simple to use due to the top mounted power switch. - Optimized vacuum even with gas ballast for continuous purge. - Whisper quiet and very low vibration. - Maintenance-free drive system and proven long diaphragm life. Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE-sandwich diaphragms increase reliability and extend operating life. The MZ 1C pump is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. It features slim design for space-saving installation and good vacuum performance. A manual vacuum regulator valve with dial gauge for adjustment of pumping speed and ultimate vacuum is available as accessory. Two-stage chemistry-design diaphragm pumps are an excellent choice for continuous, oil-free pumping of gases at medium vacuum requirements. In contrast to water jet pumps, they do not consume water and therefore do not produce any contaminated waste water. Typical applications are rotary evaporators, gel dryers, filtrations and many other lab applications. The MZ 1C is a powerful pump for smaller vacuum apparatus enabling continuous pumping of solvent vapors. It´s a compact, stand alone pump with low ultimate vacuum. If the process requires atmospheric condensation of pumped vapors or electronic vacuum control, we recommend the pump families based on the MZ 2C NT or MD 1C. INCLUDED: The VACUUBRAND MZ 1C Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Pfeiffer Vacuum TMH 064 Turbo Pump is designed for a wide range of applications in the research  (more)industry. Features: The pump of explosive gases or corrosive gases. Can be operating where there is a danger of explosion The pumping of gases and vapours which attack the materials of the pumps. Operations with improper gas modes High vacuum flange: ISO-K High vacuum seal: Viton Final pressure: < 1 x 10-8 mbar Flow Rate (N2): 30 l/s Weight: 3.5 kg

VACUUBRAND MZ 2 NT Diaphragm Pump Ultimate Vacuum 7 mbar / 5.2 torr Maximum Pumping Speed 1.4 cfm at (more) 60Hz Number of Heads/Stages 2/2 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Very low vibration - Xxceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in contact with pumped media are made of aluminum and selected plastics and allow a wide range of applications for non corrosive gases. The two-stage construction provides the advantageous combination of high pumping speed and an ultimate vacuum down to 7 mbar. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. The new NT-series features further improved performance data. Two-stage diaphragm pumps are an excellent choice for continuous, oil-free pumping at medium vacuum requirements. In contrast to water jet pumps they do not consume water and therefore do not produce any contaminated waste water. Typical applications are vacuum ovens and aqueous filtrations. INCLUDED: The VACUUBRAND MV 2 VARIO Select Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The SkanWasher 300 is an automatic 96-well microplate washer designed to give reliable, reproducible (more) results, with no cross-contamination between wells, and no carryover from plate to plate. The washer incorporates flexible software, and can handle most requirements for kit manufacturers, and research and clinical scientists. The SkanWasher 300 has eight user-defined programs, two inlets for buffer and rinse, and a special rinse program. The fluid pressure can be adjusted individually for each program, making it suitable for very gentle washing, as well as tougher, more turbulent washing. Washes all 96 wells simultaneously 8 user defined programs with 16 steps per program. Wash steps set by either time or volume (100 – 1000 ml) Versatile dispense-only function provides < 4% CV dispense accuracy and precision across the plate Easy to maintian: preset factory rinse program and removable wash head Wash head & manifold combined in one module, thereby reducing risk of contaminant growth Unique double probe washing system provides maximum washing efficiency with minimal reagent consumption Aspirate from top of liquids to avoid cross-contamination of wells Easily-accessible wash head channels for easy cleaning Motorized plate carriage, adjustable for flat & round bottomed plates Quick-disconnect fittings to avoid spills Capacity: 96-well Microplates Soak Time: Programmable to 3 Minutes Dimensions (WxDxH): 660 x 330 x 610 mm

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7&quot; graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW