Optidrive I55 pump

Technical features Flow rate 0.2-1.3 l / min Suction (max.) 3 mWg Operating pressure (max.) 4 bar (r (more)el.) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 8 mm internal diameter tube. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Edwards nEXT85D CF63 NW16 80W Turbomolecular Vacuum Pump The nEXT 85D pumps consist of the turbomole (more)cular pump with a permanently attached controller containing drive electronics.The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 D pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.nEXT 85D pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. The nEXT 85 D pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply. Features - Class leading performance in a reduced footprint - Enhanced customer choice with standard and compression focused variants - Increased operating envelope maximised by Edwards’ patented direct impeller temperature measurement technology - Additional flexibility from customised interstage and backing port position selection - 4 year service with full end-user field serviceability - CMSD enabled low vibration levels - Intelligent pumps with included micro USB port and Edwards nST software allowing pump monitoring, control and configuration - Full suite of tailored accessories Click Here to View Product Video INCLUDED: The Edwards nEXT85D CF63 NW16 80W Turbomolecular Vacuum Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

This Varian TV-301 Navigator Turbomolecular Pump was removed from a university lab where it was surp (more)lus to requirements. We have tested this turbo pump using an Avian Turbo V-250 controller, Two stage vacuum pump and Edwards penning gauge for 30 minutes (Not included). It runs smoothly and achieved the pressure of 1x10^-5 mtorr with our set up. It is in great cosmetic condition with only minor usage marks.

Buchi Vac V-500 Diaphragm Vacuum Laboratory Pump Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition, powers on, and draws a vacuum, we are unable to test it further at our facility.

KNF LIQUIPORT IP65 NF 100 FT.18S Diaphragm Liquid Transfer Pump Flow Rate 0.2 to 1.3 l/min Suction  (more)Height (max.) 3 mWg Pressure (max.) 1 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual control - Self-priming, can run dry - Splashproof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM-Simriz Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate with LED indicator. INCLUDED: The KNF LIQUIPORT IP65 NF 100 FT.18S Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 8mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-FLOW Expert 120 Peristaltic Pump The pump drive of the model 01 of the Hei-FLOW Expert  (more)series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump heads are in the range of 0.38 — 813 ml/min; with multi-channel pump heads from 0.005 — 329 ml/min.By integrating an analog interface, it is possible to control all functions externally. In addition, an optional foot switch can be adapted to enable dosing by foot pressure. Hands thus remain free to perform other work, for example, to hold the tubing and the vessel. A speed of 5 — 120 rpm with a control accuracy of ±3.5% guarantees optimum process results. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Expert 120 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Ohaus Guardian 5000 e-G52HP07C-K1 Hotplate, 120V Temperature Range Ambient + 5°C to 550°C Plate Size (more) 7 in x 7 in (18 cm x 18 cm) Temp. Stability +/-1% Plate, below 100°C +/-1°C and +/-0.5% Probe, below 100°C +/-0.5°C Features - Heats up to 550°C for versatile laboratory applications - 7 x 7 inch ceramic plate provides even heat distribution - Temperature calibration with 3 plate/3 probe accuracy - Bright LCD display ensures easy monitoring of settings - Offers Ethernet, USB, and RS232 connectivity for data logging - CE and TUV certified for reliable safety standards - Includes Pt1000 temperature probe and holder for precise control - Adjustable timer from 1 minute to 99 hours, 59 minutes The Ohaus Guardian 5000 e-G52HP07C-K1 Hotplate, 120V, is designed to provide precise, reliable heating for a range of laboratory applications. Equipped with a durable 7 x 7-inch ceramic plate, this model evenly heats up to 550°C, ideal for tasks requiring stable and consistent temperature control. The unit’s advanced calibration capabilities ensure accuracy with 3-point plate and probe calibration, enhancing precision for temperature-sensitive procedures. This hotplate features a high-contrast LCD display for clear visibility of temperature settings and includes Ethernet, USB, and RS232 connectivity options, enabling easy data logging and remote control. With CE and TUV safety certifications, the Guardian 5000 also comes with a Pt1000 temperature probe and holder, offering accurate and adaptable heating solutions for professional lab environments. INCLUDED: The Ohaus Guardian 5000 e-G52HP07C-K1 Hotplate, 120V includes: - 30500590 Temperature Probe - 30973298 Temperature Probe Holder - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Labconco RapidVapVacuum Evaporation System with RS-232 Link and Lid HeaterThe RapidVapVacuum Evapora (more)tion Systems are ideal for preparation of samples in a variety ofapplications including drug discovery, agrichemistry, mycology testing andenvironmental analysis. The systems use vacuum along with heat and vortexmotion to help speed evaporation and provide an alternative to traditionalcentrifugal evaporation methods. These systems may be used with a broad rangeof aggressive chemicals. Heat is supplied by a dry block heating system that,unlike water baths, adds no potential source of contamination and requires nomaintenance. The RapidVap Vacuum Evaporation Systems accommodate twelve different,interchangeable accessory sample blocks holding sample volumes from just a fewmilliliters to as large as 450 milliliters. As many as 110 each 12 or 13 mmtubes may be loaded at once. Additional blocks accommodate various tube typesincluding conical centrifuge tubes and scintillation vials. Contact Labconcoabout custom blocks to fit special glassware configurations such as VOA vials.INCLUDED: The Labconco 7900012 RapidVapVacuum Evaporation System with RS-232 Link and Lid Heater, 115V, 50/60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle 100ml Inserts for Z326-100H Rotor (2pk) The Hermle 100ml Inserts are for use with the 4 x 100 (more)H Swing Out Rotor for the Z326 and Z326 K centrifuges. INCLUDED: The Hermle 100ml Inserts for Z326-100H Rotor (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty