March May VSP-3 Vertical Spindle Pump

This listing is for a KNF Laboport N 840.3 FT.18 Diaphragm Vacuum Pump.The unit is in full working c (more)ondition and is ready for immediate release.Chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.100% oil-free displacement, so media cannot be contaminated by transfer, evacuation or compressionHigh resistance to vapours and condensatesChemically resistant, suitable for use with very aggressive and corrosive gases and vapoursMaintenance-free, environmentally friendly; the pumps use no water and so produce no contaminated waste waterApplication: Fluid aspiration, degassing, gel drying, rotary evaporation, centrifugal concentration, distillation.Includes diaphragm with patented tension optimisation, which allows the pump size to be smaller and extends the service life of the diaphragm. All parts that come into contact with the media are comprised of chemically resistant fluorinated plastics.

This Leybold Sogevac SV200 Single-Stage Rotary Vane Vacuum Pump was removed from a university lab wh (more)ere it was surplus to requirements. The unit is in good cosmetic condition but has some stains. The unit has been professionally serviced with new oil and mist filters fitted. It was tested at 1.5 x 10 m/bar.

Edwards nXDS10i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. Click Here to View Product Video INCLUDED: The Edwards nXDS10i Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

VACUUBRAND ME 2 NT Diaphragm Pump Ultimate Vacuum 70 mbar / 52 torr Maximum Pumping Speed 1.4 CFM a (more)t 60Hz Number of Heads/Stages 1/1 Features - Whisper quiet and very low vibration. - Powerful, even for parallel operation of several applications. - High performance even at low vacuum levels. - Very low vibration. - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. Diaphragm vacuum pumps are an excellent choice for applications with non-corrosive gases and vapors. The materials used in these pumps like aluminum and special plastics are opening a wide range of applications. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. INCLUDED: The VACUUBRAND ME 2 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Speed  (more)1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance - High performance even at low vacuum levels - Optimized vacuum even with gas ballast for condensate purge - Whisper quiet and low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The pump MZ 2C NT is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. This pump is our most popular chemistry diaphragm pump, and is the heart of a family of VACUUBRAND pumping systems. The NT-series features further improved performance data and superior vapor tolerance. Two-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with medium vacuum requirements. They do not consume water and therefore do not produce any contaminated waste water. The media contacted materials made of chemically resistant fluoroplastics open a wide range of applications in chemistry and pharmaceutics. The robust design provides very good durability and long service intervals even in demanding chemistry applications. Typical usages are vacuum generation for rotary evaporators, vacuum concentrators, gel dryers, vacuum ovens and many other laboratory applications. The MZ 2C NT is the powerful basic pump for a complete family of well established and reliable chemistry vacuum systems and pumping units.INCLUDED: The VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Diaphragm vacuum pump KNF N022AN.18 Final pressure/ultimate vacuum (abs.) (mbar): 181 mbar (see phot (more)o) Model: N022AN18 Technical specifications: Voltage: 230 V, 50 Hz Current: 0.7 A Power: 100 W Max. pressure: 4 Bar Pump flow rate: 15 l / min External dimensions (W) x (D) x (H): 28 x 20 x 23 cm Equipment tested Year of manufacture: 2007

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale. The units have not been tested at all. ITEM-44494 Capex 8C Pump ITEM-44498 DVC Microscope Camera ITEM-44496 Nikon LH-M100C-1ITEM-44499 Agilent Technologies TrayITEM-44500 3x Various Automatic Pipette Fillers ITEM-44502 Stuart Scientific AutoVortex SA5ITEM-44503 2x Yuasa NP7-12 Batteries and 1x Outdo DT 1.3-6 Battery ITEM-44504 Integra Pipetboy 2 ITEM-44505 Fisher Scientific DMS360 Water Bath ITEM-44506 EBM Switch-Mode Power Supply ITEM-44507 Accoson Blood pressure unit ITEM-44508 PH Electrodes ITEM-44509 11x Metal Triangle Shaped Pieces ITEM-44510 3M Lithium ION Battery Charger ITEM-44511 Box of various items ITEM-44518 EBQ 100 Isolated ITEM-44519 HBO 100 Microscope Lamp ITEM-44524 Shandon Cytospin 2ITEM-44530 Box of remotes ITEM-44531 Breville kettle ITEM-44532 Phillips DVD Player ITEM-44533 Toshiba Video Player ITEM-44535 3x JBL Control 1 speakerITEM-44536 Alcora Zero88ITEM-44537 ION Block Rocker ITEM-44538 P 14.4 Volt Hammer Drill ITEM-44539 Box of Various Microphones and cables ITEM-44541 EIKI LC-XB27N Projector ITEM-44542 Huion Kamvas 13 GS1331 ITEM-44549 Bellingham and stanley refractometer 586266ITEM-44550 Buchi Rotavapor R 110 ITEM-44551 Flowcell SE772 Front Panel Part ITEM-44552 LC Flowcell Panel Part ITEM-44553 Flowcell SE771 Panel PartITEM-44554 DG 604 Power Supply ITEM-44555 7600 Series Solvent D-GasserITEM-44556 FisherBrand PF-1502 ITEM-44557 Buchi Rotavapor R110ITEM-44558 Beckman C-621ITEM-44559 CSI6150 Vacuum Degasser ITEM-44560 Vacuum Degasser DG604 ITEM-44561 Nickel Electro LTD CliftonITEM-44562 Grant GD100 ITEM-44563 Stanton 462AN ITEM-44564 Precisa 125A ITEM-44565 Gec Avery Model-YA124-1AAZN13AAA ITEM-44566 Buchi 461 Water Bath ITEM-44567 Buchi B-465 Water Bath ITEM-44568 Buchi B-465 Water Bath ITEM-44569 Schnellheber Quick Action Jack ITEM-44570 Grant Water Bath ITEM-44571 Grant Y22 Water Bath ITEM-44573 2x Airflux Stands ITEM-44574 Airflux With Stand

UVP Visi-Blue Transilluminator Model Type VB-26 Lab This item was removed from a university lab wher (more)e it was surplus to requirement. It is in good cosmetic condition and in good working order. Specifications; - Model: VB-26 - S/N: J116754

Polyscience AP10S150-A11B 10L Stainless Steel Open Bath, Advanced Programmable (Ambient +10 to 150C) (more), 120V, 60HzThe Polyscience AP10S150-A11B 10L Stainless Steel Open Bath is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications. Features Time/temperature programming (ten 100-step programs) Intuitive 4.3” (10.9 cm) SmartTouch display 6 languages: French, German, Spanish, Chinese, Arabic, English Variable speed pump with open- and closed-loop external circulation capability Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe Event scheduling (time & date) with real-time clock Review temperature trends for up to 10 days Multiple selectable “home” screens On-screen help Automatic and/or user-adjustable performance optimization 5-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AP10S150-A11B 10L Stainless Steel Open Bath, Advanced Programmable (Ambient +10 to 150C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato WA-301B Auto Pure Benchtop Type 1 Water Purification System, 120V Configuration Benchtop Flo (more)w Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, benchtop or wall mount water purification system in 120V producing Type 1 deionized water. Low cost of ownership. Water is purified using a stage purification process which includes high-purity ion exchange resins to remove dissolved minerals and internal recirculation to maintain purity. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WA-301B Auto Pure Benchtop Type 1 Water Purification System, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Pharmatest PTWS310 dissolutietester