LVS ILMVAC BIOVAC 106 Aspiration & Filtration Diaphragm Vacuum Pump Lab

CTI Cryogenics Cryo Torr 8 High Vacuum Pump w/ 8001 Controller & SCW Compressor This was removed (more) from a university lab where it was surplus to requirements. The Cryo pump is in excellent cosmetic condition but the rest of the system is in good to reasonable condition. It was in full working order when last used. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

220-240V, 50-60 Hz, 16W

This Varian Turbo V60 Turbomolecular Pump 969-9002 was removed from a university lab where it was su (more)rplus to requirements. The unit was inspected by a qualified service engineer at ambient pressure. It is in good working order. The controller is not included and was used for testing purposes only. The listing is just for the pump. No controller is included. It is in very good cosmetic condition with only minor marks from use.

Dolomite Mitos P-Pump System With Remote Chamber 400 + Flow Rate Sensor This was removed from a univ (more)ersity lab where it was surplus plus to requirements. All units power up but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Included are; Includes: -Dolomite Mitos P-Pump-Dolomite Mitos Remote Chamber 400-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor-P-Pump user manual-Remote chamber 400 manual-Sensor manual P-Pump model number- 3200016_4P-Pump serial number- 1600680 Chamber serial number- 490174u7 Sensor serial number- 4903648

KNF UN842.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 4 mbar (abs.) Maximum Flow Rate 34L/min (2. (more)04 m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free The KNF UN842.3FT.40P IP44-T Diaphragm Pump features an integrated KNF self-drying system. Designed for a wide range of applications in laboratories, including vacuum drying of chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. The KNF UN842.3FT.40P IP44-T Diaphragm Pump can be used very universally due to its high resistance to aggressive media. The KNF self-drying system allows condensed liquid to be blown out of the pump heads at a high speed during evacuation. The drying cycle can be adjusted to the requirements of the individual process using three variables. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is chemical-resistant, therefore suitable for highly aggressive or corrosive gasses and vapors. This pump is 115V. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is brand new in box .INCLUDED: The KNF UN842.3FT.40P IP44-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nEXT240T HC - CF100 160W Turbomolecular Pump Ultimate Vacuum <5x10-10 mbar Inlet Connecti (more)on DNISO100-K Pumping Speed Nominal 1439.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for improved performance - Offers direct I/O or serial control; compatible with TAG and TIC controllers for system integration - Oil cartridge and bearings can be replaced in the field with minimal tools - Features multiple drag stages for enhanced compression ratios and increased backing pressure tolerance - Suitable for a variety of demanding applications including high-energy physics, electron microscopy and industrial development - Features a patented bearing suspension system to reduce noise and vibration transmission to the vacuum system - Includes a purge port for safe operation with specialized gases - The permanent magnet upper bearing ensures a hydrocarbon-free environment, reducing contamination The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240T HC - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

ZWIEBEL calibration weight 1kg class M1 INOX Laboratory calibration weight in stainless steel Brand: (more) ZWIEBEL Weight: 1 kg / 1000g Type / class: M1 maximum permissible error: ± 50mg LZ Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic case uncalibrated weight

The Malvern Panalytical NanoSight NS500 instrument provides an easy-to-use, reproducible platform fo (more)r nanoparticle characterization. The NS500 provides detailed and intuitive analysis of the size distribution and concentration of all types of nanoparticles from 10nm to 2000nm in diameter, depending on the instrument configuration and sample type being analyzed. Single particle zeta potential measurements on the NS500 provide inherent high resolution zeta distributions which can be measured simultaneously with other NTA measurements parameters like size, particle concentration and can even operate whilst in fluorescence mode. Light source: 405nm (violet), 488nm (blue), 532nm (green) or 642nm (red) Size range: 10 nm – 1000 nm Particle concentration: 10⁶ to 10⁹ particles/mL Minimum sample volume: 250 μL Dimensions (WxDxH): 530 x 250 x 400 mm

Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V Temperature Range Ambient +10°C to 26 (more)0°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 27L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports The Yamato DKN-302C Programmable Forced Convection Oven 27L with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

Motic BA210E LED Binocular Compound Microscope Magnification Range 4x to 100x Optical System Colour  (more)Corrected Infinity (CCIS) Illumination 3W LED Features - Optional intermediate Epi-LED S fluorescence module - Quadruple nosepiece - EC Plan achromatic objectives - Compact rackless stage - Upgradable with phase & pol contrast and simple darkfield - Fixed-Koehler illumination, HAL/LED interchangeability - Coaxial coarse and fine focusing system with tension adjustment - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) Motic’s BA210E is dedicated to give an answer on basic demands from educational and biomedical laboratory work. The upgraded EC Plan Achromatic objectives in our CCIS© Infinity Concept deliver a fully corrected intermediate image for crisp and clear results within a 20mm Field of View. The rackless stage enables a safe x/y scanning even for the unexperienced user. The complete series of EC Plan Achromatic objectives, from 4X to 100X magnification, is achieving an improved image contrast both for human eye and digital cameras through the photo port. Especially in Phase contrast, the optional objectives (positive & negative Phase) show a remarkable performance for a wide range of applications. The N-WF eyepieces start with the standard 10X/20 mm Field of View and provide a diopter adjustment (+/-5dpt) for both eyes, ready for the use of optional reticles. Motic's BA210E is designed for a demanding daily usage. The rackless stage allows a safe evaluation of samples without prominent gear rack. The standard eyepiece tubes feature a 30° viewing angle for maximum comfort, whereas the interpupillary distance of 55-75mm can easily be adjusted, following individual conditions. The trinocular tube option with a 100:0 / 20:80 light split allows the adaption of digital camera systems and the presentation of microscopic images to a larger public. The BA210E is an integral part of Motic’s BA microscope concept. An upgrade with Phase contrast (positive & negative), Darkfield, Polarization and even LED Fluorescence can easily be performed. The BA210E exceeds the limits of a basic upright microscope, allowing to use contrast methods for specific application fields even in teaching environments with limited resources. INCLUDED: The Motic BA210E LED Binocular Compound Microscope includes: - Binocular head Siedentopf type 30° inclined, 360 ° rotating - Widefield high eyepoint eyepiece N-WF10X/20mm with diopter adjustment - Reversed quadruple revolving nosepiece - CCIS EC Plan Achromat Objectives EC PL 4x, 10x, 40x S, 100x S-oil - Built in low position coaxial rackless stage (Right-hand control) - Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slot - 3WLED module - 45mm blue filter, immersion oil (5mL), allen hexagonal key, thumb screw, vinyl dust cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty