Hewlett Packard Cohesive Technologies 1100 Series G1310A Isocratic Pump Lab

VARIAN TV301 NAVIGATOR Turbomolecular Pump & 301 NAV C.U Lab This item was removed from a univer (more)sity where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility. Varian TV301 Navigator.Model No: 9698918S006.Serial No: 229645.Manufactured: 2007. Varian Turbo-V 301 NAV C.U.Model No: 9698972M001.Serial No: 256196.Manufactured: 2007.

Edwards nXDS15i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally.Click Here to View Product Video INCLUDED: The Edwards nXDS15i Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15i Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsSpecificationEdwards nXDS6iEdwards nXDS10iEdwards nXDS15iEdwards nXDS20iNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.8 / 4.012.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

KNF IP65 UFEM 1.10 TT.18RCP2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to su (more)it most laboratory liquid metering and dosing needs. The UFEM 1.10 FT.18RCP2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant fluoropolymer flow path materials: PTFE head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduces flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 TT.18RCP2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN820.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 10.7 mbar (abs.) Maximum Flow Rate 20L/min  (more)(1.2 m3/h) Protection Class IP44 Features - Clean, 100% oil-free operation - Corrosion-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Self-drying system removes condensate without affecting the vacuum level - Maintenance-free The chemically-resistant series N820.3FT.40P diaphragm pump is a two-stge unit with an integrated PowerDry self-drying system. There is a wide range of applications for this pump in laboratories, especially whenever clean vacuum is required and moist gases must be pumped down. Examples include vacuum-drying of vacuum oven chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. Due to its high resistance to aggressive media, this pump can be used universally. The heart of these very compact pumps are KNF structured diaphragms (PTFE-coated). These patented diaphragms were stress-optimized using the Finite Elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. This pump is 115V.

VACUUBRAND PC 3004 VARIO Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum  (more)Pumping Speed 2.7 CFM at 60Hz Number of Heads/Stages 4/3 Features - VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Powerful vacuum pump meets high vacuum requirements for most high boiling solvents - Extraordinary diaphragm life, therefore minimum operational and servicing costs - Excellent environmental compatibility through low energy consumption and efficient solvent recovery The PC 3004 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. With its high pumping speed and deep ultimate vacuum, this pump is suitable for demanding applications with even high boiling point solvents. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary. And the VARIO control algorithm maintains the desired vacuum level without running the motor faster than necessary. This prevents bumping and foaming, makes the pump whisper quiet, and extends maintenance intervals. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. Typical applications are all evaporation processes. They can be run fully automatically and with shorter process times and extra sensitivity even for challenging mixtures at the same time. The VARIO® control ensures high process reliability through prevention of boiling retardation or foaming. It detects boiling pressures automatically and self-adapts to changing process parameters at any time. This all without any need of parameter input or the use of a solvent library. Also in many other applications and in laboratory vacuum networks the VARIO® control brings significant advantages as it provides always the appropriate pumping speed. The VACUU·BUS® interface facilitates an user-friendly configuration of even complex vacuum installations.INCLUDED: The VACUUBRAND PC 3004 VARIO Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

GILSON MiniPuls 2 Peristaltic Pump 1 channel only Voltage: 220-240V, 50/60Hz Standard flow rate: 0.3 (more) µL/min – 30 mL/min at maximum pressure 0.5 MPa Continuous flow Forward and reverse movement.

This listing is for a Watson Marlow 120S/DV Peristaltic Pump. The unit is in full working condition (more) and is ready for intimidate release. Introducing the Watson-Marlow 120S/DV Peristaltic Pump, a cutting-edge solution designed for precise and reliable dosing and metering applications. This versatile pump is ideal for laboratories and cleanroom environments, offering exceptional performance for a wide range of fluid transfer tasks. Key Features: Flexible Control Options: Choose between manual remote control or automatic operation via 4-20mA or 0-10V inputs, providing adaptability to your specific workflow needs. Impressive Flow Rate: Achieve flow rates from 0.001 to 170 mL/min at 30 psi, making it suitable for both low and high-volume applications. High Motor Speed: With a motor speed range of 0.1 to 200 rpm, the 120S/DV allows for precise adjustments to match your process requirements. Versatile Tube Acceptance: Compatible with 1.6mm wall thickness tubing in five materials, accommodating internal diameters from 0.5 to 4.8mm for diverse applications. Technical Specifications: Model: 120S/DV Pump Head: 114DV flip-top pump head Operating Characteristics: Compact and stackable design, perfect for installation in cleanrooms, LAF, and biosafety cabinets. Benefits: Maintenance-Free Design: The 120S/DV features a virtually maintenance-free operation with no costly seals, valves, or rotors that can leak or clog, ensuring longevity and reliability. User-Friendly Features: Speed scrolling, priming, and keypad lock functions enhance usability, making it easy to operate in fast-paced environments. Safety and Compliance: This pump meets international safety standards, including UL and CSA certifications, and complies with electromagnetic compatibility standards, ensuring peace of mind in critical applications. Elevate your liquid handling processes with the Watson-Marlow 120S/DV Peristaltic Pump—the perfect combination of precision, reliability, and user-friendly design for all your dosing and metering needs. Experience the difference today!

This Orbit Marine AL-7108-CCU Central Control Unit was removed from a university lab where it was su (more)rplus to requirements. The item powers on and boots up with Orbit Marine tracking system software Version 4.84 10.12.2012 installed. It was tested with an external monitor (not included). The front panel is not a display screen. It is in good cosmetic condition with marks from use.

Dell Optiplex with Heidolph Hei-Control-Software This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in god working order. It is in good cosmetic condition with marks from use.

This listing is for a Shell Lab S16R-HS-2 Shaking Incubator.The unit is in full working condition an (more)d is ready for immediate release.Supplied with CO2 Bottles and Trolley.The Shell Lab S16R-HS-2 Shaking Incubator is expertly crafted for the continuous growth of biological organisms, making it ideal for various research applications. Here’s a rundown of its standout features:Key Features:Generous Capacity: With a 92-liter capacity, the S16R-HS-2 is well-suited for accommodating larger experimental setups, perfect for microbiology and cell culture studies.Standard Voltage Compatibility: Operating on 110/120 volts allows easy integration into most lab environments without the need for special electrical installations.Adjustable Orbit: The incubator offers an adjustable orbit, providing the flexibility to switch between a vigorous 0.5-inch stroke for enhanced mixing and a gentle 1-inch stroke for delicate cultures. This versatility supports various cell types and their specific oxygenation needs.Counter Balance Weighting System: This unique feature ensures smoother operation by adjusting to off-center loads, varying capacities, and stroke lengths, reducing vibration and enhancing stability—especially important for delicate cultures.Precise Temperature Control: Essential for biological growth, the incubator maintains stable temperatures, which can be critical for experiments requiring strict environmental conditions.Compact Footprint: Its small footprint makes it an excellent choice for labs with limited space, allowing for efficient use of available work areas.Static Incubation Capability: Includes shelf space to accommodate static incubation while shaking, providing additional flexibility for experimental setups.Comprehensive Alarm System: Equipped with alarms for temperature, RPM, and timing, users are promptly notified of any deviations, ensuring that conditions remain optimal for growth.Overtemperature Protection: This feature includes a safety thermostat, providing an extra layer of protection to prevent overheating and ensuring reliability during long-term experiments.

Julabo CORIO CD-1000F Refrigerated Circulator, 115V/60Hz Working Temperature Range -40°C to 150°C C (more)ooling Capacity 1000W at 20°C Refrigerant R449A Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 The CORIO™ CD refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incorporates easy change-over for control of fluid circulation internally or externally. Refrigeration combinations offer a low temperature range from -20°C to -40°C with an upper limit of 150°C. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. USB connection for external PC control and data-logging. A space-saving cooling coil design yields more usable space in the bath tank. Bath lid and drain tap included. PID temperature control provides ± 0.03 °C stability. Centrifugal pump capacity of 15 L/min with pressure to 5.1 psi. Stainless steel bath tank. Class III (FL) according to DIN 12876-1. Click Here to View Product Video INCLUDED: The Julabo CORIO CD-1000F Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Innovative MALDI-TOF and TOF/TOF technology designed and optimized to be easy-to-use; robust systems (more) for both traditional MALDI applications (reliable and detailed protein/peptide characterization, and polymer analysis) as well as cutting edge work (high resolution MALDI Tissue Imaging, glycan analysis or high-throughput MALDI Biotyper microbial identification). The new autoflex speed incorporates a number of key features which enhance its capabilities and value including: Enhanced Speed with a 2 kHz (kiloHertz) proprietary smartbeam-II solid-state laser and electronics for high throughput applications including LC-MALDI, MALDI Imaging, and high-throughput microbiology ID Unique FAST-SRM mode provides single reaction monitoring capabilities for imaging of drugs and metabolites in tissue Expanded High-Resolution Mass Range for analysis of polymers and Top-Down, intact protein sequencing for long sequence readouts FlashDetector technology to increase resolution and prevent signal saturation for complex samples Self-cleaning Ion Source cleans the instrument source in minutes to improve system up-time and with minimal operator maintenance Optimized Software packages for numerous applications e.g. Protein-, Peptide-, Polymer-Analyses, and MALDI Imaging, clinical research methods and the MALDI Biotyper IVD-CE workflow. The most flexible autoflex instruments are available in linear only mode, high resolution reflectron mode and the latest TOF/TOF technology (LIFT) which enables the use of various MS/MS techniques (e.g. LID, high energy CID) for fast and sensitive MS/MS experiments. Including PC and several sample plates