Edwards nEXT300D - ISO100 160W Turbomolecular Pump

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump, 250 mbar Ultimate Vacuum 253 mbar (more) (190 Torr) Pumping Speed 12 L/Min Number of Heads 1 Head Features - Provides clean and uncontaminated air exhaust with a built-in filter - Automatic cooling exhaust system allows for 24-hour continuous use - Customizable vacuum and gas velocity settings for specific applications - TEFLON surface treatment protects against gas corrosion, enhancing durability - Delivers a pumping speed of 12 L/Min for effective operation - Achieves a vacuum level of 253 mbar (190 Torr) for efficient performance The MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump is designed for efficient and reliable operation in environments that require clean and uncontaminated air exhaust. This pump features an oil-free design with a built-in filter, ensuring that the exhausted air remains free from contamination. The MS-VP250 is equipped with an automatic cooling exhaust system, allowing for continuous 24-hour operation, making it ideal for demanding laboratory and industrial settings. Its pressure-adjustable design enables precise control of vacuum and gas velocity to meet specific application requirements. The pump's TEFLON surface treatment provides robust chemical and corrosion resistance, ensuring durability even when exposed to harsh gases. With an ultimate vacuum of 253 mbar (190 Torr) and a pumping speed of 12 L/Min, the MS-VP250 delivers efficient vacuum performance. It features 6 mm inlet and outlet flanges, operating within a temperature range of 7°C to 40°C. The pump runs quietly with a noise level of less than 60 dBa, making it suitable for environments where low noise is essential. Its compact design, measuring 7.7 x 3.8 x 6.1 inches, and a weight of 7.6 kg, make it easy to fit into various setups. The pump is equipped with nitrile butadiene rubber valves for reliable operation and requires a motor power of 75W, compatible with electrical requirements of 110/220V, 50/60Hz. The MS-VP250's distinctive orange color not only enhances its aesthetic appeal but also signifies its robust anticorrosive and chemical resistance properties, making it a reliable choice for a wide range of vacuum applications.INCLUDED: The MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump, 250 mbar includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Pump (Drive Unit) with Four Channel, Standard Flow Head (R4)Features - Utilizes po (more)sitive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The MINIPULS 3 Pump (Drive Unit) with Four Channel, Standard Flow Head (R4) includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards E1M18 Vacuum Pump Ultimate Vacuum < 3x10-2mbar Inlet Connection NW25 Displacement 25.0 m3 (more)h-1 / 14.7 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Edwards E1M18 Vacuum Pump The EM range of oil sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) air cooled motor. Each EM pump is supplied with 2 x 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately. This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior after the pump stops. The pumping chambers are air-tight, so this arrangement also prevents suckback unless the gas ballast valve is open.You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.Click Here to View Product Video INCLUDED: The Edwards E1M18 Vacuum Pump includes: - 2 Liters of Ultragrade 19 Oil - O ring and centering ring - Two Allen keys and spares seal for oil drain and filter plugs - Operator's Manual - 1 Year Manufacturer's Warranty

The Vortex ZX4 agitator is a modern and advanced vortex with variable speed and two operating modes, (more) sensor or continuous. Thanks to the revolutionary IR sensor mode, an infrared (IR) system detects the presence of the test tube and the instrument is activated automatically: less user operations, more comfort in the working environment Technopolymer structure and ergonomic design guarantee excellent chemical resistance and considerable stability on the laboratory bench, and can be used on many surfaces. Wide range of accessories. IR sensor, VELP patent VELP Scientifica is the only company in the world to supply the technological and revolutionary IR system: as soon as the test tube is detected by the sensor, the latter automatically activates the instrument, without the need for any pressure from the laboratory technician. Compared to the classic pressure mode, the patented IR sensor system guarantees a drastic reduction of the stresses perceived by the operator, increasing the comfort of the working environment. Flexibility, Numerous Accessories ZX4 is an extremely versatile solution, being able to be combined with a variety of platforms. The easy and safe attachment of the platforms is done with a simple push, and guarantees excellent performance in the mixing of many types of tubes and containers. - Variable speed operation, electronically controlled up to 3000 rpm - Wide choice of accessories for tubes, plates and bottles - Universal voltage / frequency model - The accessories adapt with a simple push - Excellent resistance to chemical agents thanks to the technopolymer casing - Excellent stability with zinc alloy base - Large, non-slip rubber feet to stay in the desired position - IP 42 protection against particles and liquids - Designed for maximum durability and backed by a 3-year warranty

Manufacturer: Binder Model: KB 240 P/N: 9120-0030 S/N: 00-17471 Description: Binder KB 240 functiona (more)lity is based on APT.line™ preheating chamber technology. It has 240 L capacity achieving max. 100 °C. Features: - Convection Technology: APT.line™ preheating chamber technology- MP Controller with 2 Programms with 10 sections each / 1 Programm with 20 sections- Adjustable fan speed- Controller with time-segment and real-time programming- Inner door made of tempered safety glass Specifications: - Temperature range: 0°C to 100°C- Capacity: 240 L- Certifications/Compliance: Class 3.1 independent temperature safety device (DIN 12880) with visual and acoustic alarm- No. of Doors: 2- Dimensions (D x W x H) Interior: 500 x 800 x 600 mm- Dimensions (L x W x H) Exterior: 800 x 1034 x 1142 mm- Electrical Requirements: 200 to 240 V, 50 Hz. 4.1 A- Weight : appr. 170 kg Items delivered: - Binder KB 240 w/ 1x SS rack- Instruction Manual as PDF via E-Mail request Condition: The item is in very good cosmetic condition. It is 100% functional tesdted and ready to be operated.

Speed: 600-3200 rpm Dimensions (HxWxD): 165 x 122 x 165 mm Weight: 4 kg

Set consists of: -1x 1 channel pipette of 2-20 ul -1x 8 channel pipette of 100-1200 ul -Charger

Lot of Laboratory Glassware Flasks, Pipettes etc Fisher, Quikfit, Pyrex Lab A large collection of la (more)boratory glassware which is mostly unused.These items were removed from a university lab, where they were surplus to requirement. All included items range from Excellent/Unused to Good cosmetic condition with no damage sustained. Included are as follows: 31 x Quickfit 250ml Elenmeyer conical flasks with collar and hollow glass stopper27 x 500ml Pyrex heavy duty glass conical filter flasks with side arm tubulation24 x 250ml Pyrex conical filter flasks with side arm tubulation22 x Pyrex long funnels 20cm length 7cm diameter21 x short funnels 12cm length 4cm diameter, 9 of which are fitted with rubber bungs100 x Fisherbrand test tubes 24 x 150 soda rimless, code FB6311610 x boxes of 250 pieces Fisherbrand glass pipettes 23cm length, code FB502533 x thistle funnels 23cm length 3cm diameter3 x Shandon Unikit chromatography 3 litre jars with lids but missing inner columns99 x Sorvall tubes 5ml

IKA Midi MR 1 Digital Magnetic Stirrer Speed Range 0 to 1,000 RPM Plate Material SS 1.4301 Stirrin (more)g Quantity Max. 50 l Features - Stirring quantity up to 50 liters (H2O) - Flat, sturdy stainless steel casing - Non-locking motor - Infinitely variable speed - Digital LED speed display - Timer (0 - 56 min) or continuous operation - Integrated USB and RS 232 interface The IKA Midi MR 1 digital is a powerful magnetic stirrer without a heating function, designed for stirring quantities up to 50 liters (H2O). It features a flat, sturdy stainless steel casing and a non-locking motor with infinitely variable speed. The digital LED speed display allows for precise control, with a speed range of 0 - 1000 rpm. This stirrer also includes a timer (0 - 56 min) for timed operations or continuous operation. Integrated USB and RS 232 interfaces provide easy connectivity for data transfer. The set-up plate measures 350 x 350 mm and is made of durable stainless steel, ensuring reliable performance.