Dionex Thermo Pump left/2P-10P Valve Cspillary ID 0,25 5035.3103

KNF Neuberger NO35AN.18 Diaphragm Vacuum Pump This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and runs but has not been tested further. It is in good cosmetic condition with minor marks.

Edwards NEXT 300T HC ISO100 160W Turbomolecular Pump Ultimate Vacuum <6x10-8 Inlet Connection DN1 (more)00ISO-K Displacement 25.0 m3h-1 / 14.7 ft3min-1 Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards NEXT 300T HC ISO100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nXDS15i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally.Click Here to View Product Video INCLUDED: The Edwards nXDS15i Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15i Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsSpecificationEdwards nXDS6iEdwards nXDS10iEdwards nXDS15iEdwards nXDS20iNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.8 / 4.012.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

KNF IP65 FEM 1.02 FT.18S Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit mo (more)st laboratory liquid metering and dosing needs. The FEM 1.02 ST.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 FT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF LIQUIPORT IP65 NF 300 FT.18RC Diaphragm Liquid Transfer Pump Flow Rate 0.5 to 3 l/min Suction H (more)eight (max.) 3 mWg Pressure (max.) 1 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual and remote control - Self-priming, can run dry - Splash-proof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Start/Stop through logic control (TTL) - Output signal fault alarm - Valve material: FFKM-Simriz® Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual and remote control of liquid flow rate. INCLUDED: The KNF LIQUIPORT IP65 NF 300 FT.18RC Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 12mm - Cable for External Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato GLD-137CC, 115V Rotary Vane Pump with Rubber Hose Kit, 115V Ultimate Pressure 6.7 x 10-3 mb (more)ar Actual Pumping Speed 135 L/min (50Hz) 162 L/min (60Hz) Weight 27 kg Features - Voltage: 115V - Actual pumping speed (CFM): 5.72 - High performance, low vibration, and noise - Oil-back-flow prevention mechanism - Large-sized oil level gauge - Equips multi-voltage motor and corresponds to international standard Introducing the GLD Series Rotary Vane Pump, a high-performance and low-noise vacuum pump designed to excel in various applications. This pump boasts an array of impressive features, including a gas ballast valve, oil-back-flow prevention mechanism, and a generously sized oil level gauge. With its multi-voltage motor and adherence to international standards, it ensures versatility and compatibility across different setups. Perfectly suited for applications in the fields of chemistry, scientific experimentation, analyzers, and laser systems, this pump also excels as a backing pump for electronic microscopes, semiconductor equipment, sputtering and vacuum evaporation equipment, as well as vacuum and freeze dryers. Plus, with a noise level of just 57 db(A) or less, it ensures a quiet and efficient operation. Experience superior performance and reliability with the GLD Series Rotary Vane Pump, your ideal choice for vacuum solutions.INCLUDED: The Yamato GLD-137CC, 115V Rotary Vane Pump with Rubber Hose Kit, 115V includes: - Hose Clamp - Rubber Hose ID: 16mm/1500mm - Hose Port Type Suction Pipe OD: 18mm x M20 - 50mm Square Adapter for Suction Port - Oil Mist Trap - Power Cord - One Year Manufacturer's Warranty

Leitz Diavert Inverted Microscope w/ 3 x Objectives This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use. Included are; 2x Eyepieces:PERIPLAN 10 x Leitz Wetzlar Germany Objectives:Phaco 1 L32 /0,40 170/-Phaco 1 10/0.25 160/-Phaco 1 10/0.25 160/-

Branson M3800 Mechanical Ultrasonic CleanerFeatures - Sweep frequency eliminates standing waves and  (more)creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, as well as the ability to set continous operation Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features: Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Click Here to View Product Video INCLUDED: The Branson M3800 Mechanical Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Motic BA310E LED Trinocular Compound Microscope - Phase Package The Motic BA310E Elite phase contras (more)t microscope for clinical, University or Institutional uses. The BA310 elite phase contrast microscope has full phase 10x, 40x, 100x objective lenses and a full phase condenser. - Objective Lenses: Inward facing quintuple objective turret revolving nosepiece holds CCIS EC Plan Achromat 4x objective, EC Plan Phase Contrast PH10x, PH40xs, PH100xs oil immersion. - Eyepieces: Siedentopf high eyepoint widefield 10x eyepieces, 20mm FOV. Accepts 25mm diameter reticle. 30° inclined binocular tubes with interpupillary distance adjustments from 55 mm to 75 mm. (WF12.5x and WF15x eyepieces are also available). Independent diopter adjustments are on each eyepiece, rather than on the eyepiece tube. Trinocular port features a professional light distribution slider of 100:0 / 20:80. - Total Magnification: 40x, 100x, 400x, 1000x. - Specimen Stage: Rackless stage. Rectangular mechanical stage, 175mm x 140mm with a travel range of 76mm x 50mm. Low positioned coaxial control knobs make it easy to control stage movement. The stage is protected with a special hard coating to protect against abrasion and fungus growth. - Stand: T-shaped base and pyramid-designed frame provide superb stability and mechanical design to achieve ergonomic and fatigue-free operation as well as saving vital desk space in modern laboratories. - Focusing: Fine and coarse coaxial focusing. The Combination of a triangular steel rail with an adjustable torque control knob provides for easy control of the coarse focusing tension and total vertical movement of 25mm at 2 µm. - Condenser: 5-position phase contrast turret condenser with BF, DF, PH1, PH2, PH3. - Illumination: Your choice of either LED illumination or 6V / 30W quartz halogen illumination together with the field iris diaphragm provides an exact Koehler illumination. Includes built-in intensity control.100~240V. - Anti-Fungus Treatment: All critical parts of the microscope such as the eyepieces, objectives and observation tube are anti-fungus treated to ensure image clarity and optical performance. - Size: 15.5" high. - Warranty: Five year warranty excluding electrical parts. Click Here to View Product Video INCLUDED: The Motic BA310E LED Trinocular Compound Microscope - Phase Package includes: - EC Plan Achromat objectives 4x, 10x, 40x S, 100x S-oil - Observation tube - Turret Condenser - Phase Objectives - Phase Centering Telescope - Eyepiece - Nosepiece - Objectives - Rackless stage - Condenser - Illumination - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW