Charles Austen Pumps Dymax 30 Vacuum Pump

VACUUBRAND VACUU-PURE 10C Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed (more) 5.3 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - Chemically resistant - No wear parts The dry screw pump VACUU-PURE® 10C reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10-3 mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemically resistant, and no wear parts. VACUU-PURE 10C is ideally suited for clean processes and the production of pure products. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. At the same time, aggressive gases and vapors can be pumped without any worries because of the high chemical resistance. The use of a cold trap is no longer necessary in most applications. VACUU-PURE easily handles high vapor loads through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10C Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND PC 3001 VARIO Select Chemistry Pumping Unit Ultimate Vacuum 2.0 mbar (1.5 Torr) Maximum  (more)Pumping Speed 1.18 CFM at 60Hz Number of Heads/Stages 4/3 Features - Simplify lab work with the VACUU·SELECT vacuum controller with graphic user interface and predefined applications - Automatic boiling point detection and continuous optimization of vacuum levels for quick process times - Compact and powerful; superior performance even with continuous condensate purge - Whisper quiet and ultra low vibration - Eco-friendly: extremely low power consumption and efficient solvent recovery. Oil-free! The PC 3001 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. This pump is suitable for even high boiling point solvents. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller detects solvent boiling and automatically adjusts the pump's motor speed to maintain process control. The VARIO motor speed control also makes the pump whisper quiet and provides for exceptionally long maintenance intervals. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.INCLUDED: The VACUUBRAND PC 3001 VARIO Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 UFEM 1.10 TT.18S2 Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The UFEM 1.10 ST.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. The KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump is brand new in box . Includes a 1 Year Full Parts and Labor Warranty. KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump SpecificationsWeight2 lbs., 0.9kgConnection Tubing ID1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°CPermissible Liquid Media Temp Range5 - 80°CPump HeadPVDFDiaphragmPTFE coveredValvesFFKMDimensions (L x W x H)5.9 x 5.7 x 3.7in (150 x 144 x 93mm)Maximum Suction9.8 ft of waterMaximum Pressure85 psig, 6 barPower Consumption24WLiquid Flow Rate1-100 ml/minLiquid Dosing Volume1-999 mlFunctionsManual Operation (S Version)Electrical100 – 240VComparison of ModelsSpecificationKNF IP65 UFEM 1.10 FT.18RCP2KNF IP65 UFEM 1.10 FT.18S2KNF IP65 UFEM 1.10 KT.18RCP2KNF IP65 UFEM 1.10 KT.18S2KNF IP65 UFEM 1.10 ST.18RCP2KNF IP65 UFEM 1.10 ST.18S2KNF IP65 UFEM 1.10 TT.18RCP2KNF IP65 UFEM 1.10 TT.18S2Connection Tubing¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4 mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°CPermissible Liquid Media Temp Range5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°CPump HeadPTFEPTFEPPPTFEStainless SteelStainless SteelPVDFPVDFValvesFFKMFFKMFFKMFFKMFFKMFFKMFFKMFFKMLiquid Flow Rate1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/minLiquid Dosing Volume1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 mlFunctionsN/AN/AN/AManual Operation (S Version)N/AManual Operation (S Version)N/AManual Operation (S Version).comparison-table tr td:nth-child(9) { background-color: #fffacd; }

Edwards nEXT300D - ISO100 160W Turbomolecular Pump Ultimate Vacuum <6x10-8 mbar Inlet Connection  (more)DN100ISO-K Pumping Speed Nominal 18,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards nEXT300D - ISO100 160W Turbomolecular Pump includes: - One Year Manufacturer's Warranty

Edwards mXDS3 Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5 m (more)^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3 Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: -50°C to -86°C (at 32°C maximum ambient operating temperature) Cool down time: 3. (more)7 hours (from 25°C to -85°C, freezer empty) Alarms: High/Low temperature, power fail, battery low, filter clean, fault Capacity: 101 L Internal Dimensions (HxWxD): 640 x 480 x 330 mm Dimensions (HxWxD): 830 x 900 x 566 mm Weight: 116 kg

Zeiss Axioskop FS Fluorescence Microscope w/ 5 x Objectives This was removed from a university lab  (more)where it was surplus to requirements. The product has not been tested due to the absence of its power supply, but it is in good condition with minimal signs of wear. Due to the power supply not being included, we are unable to test further. Includes the following untested objectives; Gallenkamp 160/0.17 100 1.25 oil Zeiss Achroplan 10x/0,25 ∞/- Zeiss Epiplan 50x/0,50 44 28 50 Zeiss LD Achroplan 32x/0,40 PH2 ∞/1,5 Zeiss Achrostigmat 5x/0,12 44 01 20

Large VacGen Vacuum Tank & Beam Tube with VAT Gate Valves. This was removed from a university wh (more)ere it was surplus to requirements. The lab confirmed that all the equipment is in excellent functional condition and has been housed in a clean room lab for the full lifetime. Tank Dimensions: L 136cm x W 126cm x H 260cm.Tank is fitted with 6 openings.3 x 65cm x 65cm.2 x 10cm x 10cm.1 x 15cm x 15cm. Beam Tube Dimensions: L 450cm x W 81cm x H 81cm.Opening 65cm x 65cm. 2 x Gate Dimensions: L 100cm x W 24cm x H 183cm.Opening 65cm x 65cm.Fitted with SMC Solenoid valves Model: VF3143. Three studs have been snapped off in one of the Gate valves.