Pipettes Calibration

This item has just arrived in our stock. Please enquire for further details.

Sartorius Stedim BioSealer Calibration-Holder Kit This was removed from a working lab where it was  (more)surplus to requirements. The unit looks to be unused but has been opened. It is in excellent cosmetic condition with minor marks.

Matrix Technologies PlateMate 2x2 Automated Pipetting Workstation This was removed from a university (more) lab where it was surplus to requirements. The unit powers up and goes through all start-up sequences. It is in good cosmetic condition with minor marks. It is fitted with a pipette head with 96 tips at 300µl.

Tecan Freedom Evo Robotic Liquid Handler with TE-Vacs Vacuum Unit and Accessories This system was re (more)moved from a university lab where it was surplus to requirements. The system is in good cosmetic condition.The liquid handler powered on, but the vacuum unit could not be tested due to the lack of a computer control system. No further testing was carried out. There is no PC or software included in this system. The system comprises the following: - Tecan Freedom Evo Unit - Serial No.: 802001119 - Equipped with two robotic arms: one for plate handling and an eight-head injector arm - Tecan TE-Vacs Vacuum Unit - Serial No.: 802001120 - Aluminium stand (150 x 100 x 82cm), supplied flat-packed Included Accessories: - 1 x Kingston 480GB SSD internal memory storage - 7 x Injector pump piston plungers - 8 x Syringe head tubes - 5 x Syringe head tube sheaths - 8 x Insert LV Diti Standard Cone Genis Ref. 10612518 - 1 x 10-litre square plastic bottle - 1 x 5-litre plastic bottle with 3 suction hose nipples and 1 probe - 2 x 10-litre plastic waste and system liquid bottles - 1 x Diti Waste and Wash Station assembly - 6 x Coils of waste and system liquid hoses - 1 x Tecan Te-Shake plate shaker - 4 x Plate storage stacking towers - 6 x 4-plate holders - 2 x 3-plate holders - 5 x Pipette plate holders - 1 x Thermo Finnpipette FP-Focus MCP12 (30-300 microliters) - 4 x Thermo Finnpipette FP-Focus (0.5-5ml)

Arise Biotech EzMate 601s Automated Pipetting System This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and runs through calibration a self-tests without fault. There is no PC with the unit so we were unable to test it further. It is in good cosmetic condition with minor marks from use. Item does not include EzStarter Software or ACHM Control Box.

CyBio CyBi Well Vario Pipetting Robot System - 96-Head & 384-Head This is being sold on behalf o (more)f a university lab. It is surplus to requirements. The unit is in excellent cosmetic condition. It has not been serviced or used for several years but was in good working order prior to this. It also has incorporated a small robotic arm that can pick up racks/plates and a capper/decapper for microtubes (FluidX or Matrix) with septum seals. We have installed a new HDD with Windows 7 on the PC.The CyBio Composer V2.10 software is included and also installed on the PC.The software will require setting up before use. The system includes the following: CyBio CyBi Well Vario Pipetting Robot System Right:-CyBi - Well vario 384/40OL3381 1 1011 Right Right Stacker - 0027 1 8014Right Left Stacker - 0027 1 8011 CyBi - Well vario 96/250OL3381 1 1010 Left:-Left Right Stacker - 0027 1 8006Left Left Stacker - 0027 1 8007 Comes on 2 x trepsa tablesTable dimensions - L180 W90 H84cm PC - Dell Precision T1650Comes with Dell 17" Monitor, keyboard & mouse Other parts incuded:- Fluid X Xdc-96proModel - HT112E/MISN - 40.165 4 x 6L Nalgene Water Containers Moxa UPort 1610-16 USB to 16 Port RS-232 Serial HubSN - TABF01136349 CyBio Power Supply0L3901 1 4003 CyBio Power Supply3402 5 8135 CyBio Expansion Module0026 4 4103 CyBio Expansion Module with 2 x easy-load MasterFlex 7518-000026 3 7210 CyBio Expansion Module with 2 x easy-load MasterFlex 7518-000026 3 7206 2 x Gilson Tube Rack holders Voyager Barcode Scanner 2 x Boxes of Eppendorf 384 PCR Plates (300 PER BOX)1 x Box CyBi TipTrays 384 - 25ul 6 x 4 Trays1 x Box CyBi - TipTrays 96 - 250ul 6 x 3 Trays Tables not included.

Digital dispenser BRAND DISPENSETTE S 1-10ML Brand reference: 4600340 volume range: 1-10ml Accuracy  (more)in % (+/-): 0.5% Accuracy in µl (+/-): 50 µl coefficient of variation in %: 0.1% coefficient of variation in µl: 10 µl Without purge valve

Dispensette BRAND DISPENSETTE 1-5ML volume range: 1-5ml Without purge valve

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hersteller: Biohit Model: mLINE mechanische Pipette, 1 Kanal m 10 0,5-10 µl P/N: 725020 S/N: 125955 (more)85 Beschreibung: Die mLINE ist Biohit fortschrittlichste mechanische Pipettenfamilie. Sie bietet einzigartige Ergonomie, Leistung und Sicherheit beim manuellen Pipettieren. Sie wurde besonders für wiederholtes und lange dauerndes Pipettieren entwickelt, um arbeitsbedingte Verletzungen an Händen, Armen und Schultern sowie RSI (Repetitive Strain Injury) zu verhindern. Die mLINE wird immer wieder von Gesundheits- und Sicherheitsbeauftragten auf der ganzen Welt empfohlen. Leistungsmerkmale: - Exzellente Ergonomie, die vor Verletzungen schützt, äußerst leichte Pipettier- und Spitzenabwurfkräfte- Hohe Genauigkeit und Präzision, auch während repetitivens und langwährenden Pipettierens- Minimiertes Kontaminations-Risiko mit Safe-Cone-Filtern und voll autoklavierbar- Verbesserte Sicherheit mit Volumensperre, verhindert versehentliche Volumenänderungen während des Pipettierens Technische Daten: - Produkt Familie: mLINE- Pipettentyp: Mechanische Pipetten, einstellbares Volumen- Primärer Produkttyp: Pipetten- Kanäle: 1- Volumen: 0,5 – 10 µL- Maße (BxTxH): 280 x 85 x 45 mm Lieferumfang: - Biohit mLINE mechanische Pipette, 1 Kanal m 10 0,5-10 µl OVP- Accessoires (s. Bilder)- Gebrauchsanleitung Biohit mLINE mechanische Pipette ist in neuwertigem Zustand, in Originalverpackung und vollkommen funktionsfähig.

GILSON p200 micropipettes (20-200 microliters). They are supplied calibrated-sterilized and free of  (more)RNase.

Pipettor liquid Drummond PipetAid. With charger 230 V. Volume from 1 to 100 mL. Valid for glass pipe (more)ttes and plastic.

OMNITIP™ Starter ST 300 µl tips are high quality laboratory accessories designed for pre (more)cision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 300 µl Colour: transparent Set contains: box, 6 racks and 576 tips Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

OMNITIP™ Starter ST 10 µl tips are high quality laboratory accessories designed for prec (more)ision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 10 µl Colour: transparent Set contains: box, 6 racks and 576 tips Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

OMNITIP™ Starter ST 1000 µl tips are high quality laboratory accessories designed for pr (more)ecision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 1000 µl Colour: blue Set contains: box, 3 racks and 288 tips Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

OMNITIP™ BT 300 µl tips for pipettes are high quality laboratory accessories designed fo (more)r precision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 300 µl Colour: transparent Set contains 1000 tips in a plastic bag with a zipper closure Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

OMNITIP™ BT 1000 µl tips for pipettes are high quality laboratory accessories designed f (more)or precision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 1000 µl Colour: blue Set contains 250 tips in a plastic bag with a zipper closure Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

OMNITIP™ BT 10 µl tips for pipettes are high quality laboratory accessories designed for (more) precision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 10 µl Colour: transparent Set contains 1000 tips in a plastic bag with a zipper closure Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

The AP-12.5Y is designed to calibrate multichannel pipettes starting at 10 μl. The device feature (more)s a readability [d] of 0.01 mg and can calibrate up to 12-channel fixed-volume and variable-volume pipettes. Because the pipette calibration on the AP-12.5Y is fully automatic, it is four times faster. The calibration procedure for a 12-channel pipette takes less than 20 minutes, not six hours, on this instrument. When purchasing the AP-12.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, two pumps: a single-channel pump and a four-channel pump The ergonomic design of the AP-12.5Y makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a four-channel pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. After emptying a 12-channel pipette, the AP-12.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). The AP-12.5Y can calibrate not only 12-channel pipettes, but also single-channel pipettes.

The AP-12.1.5Y is the first automatic device designed to calibrate single- and multi-channel micropi (more)pettes with [d] 1 µg, in accordance with ISO 8655 requirements. Pipette calibration can be performed in the volume range from 0.5 μl a maximum of 12 channels of fixed and variable volume pipettes. The impressive calibration readability is the result of the co-called separation chamber which stabilizes the measurement path and protects it from excessive air movement. This is a guarantee of high precision measurements. AP-12.1.5Y guarantees the comfort of work. The ergonomic design of the device makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. Other factors that affect the ergonomics of work: compact, mobile design clear, intuitive multilingual menu data security transfer of results directly to the customer’s computer application internal procedure report automatic periodic adjustment of the device. After emptying a 12-channel pipette, the AP-12.1.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.1.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.1.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). When purchasing the AP-12.1.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, a pump equipped with two nozzles: to draw water from one container or from four containers at once, a brush, a pincette, a vessel for the liquid, the Calibration Certificate for the balance.

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.