Easily list your scientific equipment
Top suppliers for laboratory & industry
New and used instruments
Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V
Temperature Range
Ambient +20°C to 210°C
Temperature Distribution Accuracy
± 2.0°C (at 210°C)
Chamber Volume
150L
Features
- High precision controller allows high performance temperature control and display of CO2 and power discharge
- Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models
- Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models
- Program operation with a maximum of 99 steps, 99 patterns repeatable
- Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes
- Data acquisition from internal test device possible because of cable holes
- Easy system upgrade with various option settings
Energy saving, programmable 150L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C.
INCLUDED:
The Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V includes:
- 2 x Shelves w/ Brackets
- Power Cord
- Operator's Manual
- Manufacturer's Documentation
- 1 Year Manufacturer's Warranty
Circulation method | Forced air circulation |
External temp. range | 5~35°C |
Operating temp. range | RT+20°C to 210°C |
Temp. control accuracy*¹ | ±0.5°C (at 210°C) |
Temp. distribution accuracy*¹ | ±2.0°C (at 210°C) |
Temp. gradient*¹ | 8°C (at 210°C) |
Temp. rise time*¹ | ~70 min. |
Chamber / Exterior / Insulation | Stainless steel / Chrome-free electro-galvanized steel plate, chemical-proof baked-on finish / Glass wool |
Door | Single swing (left side) |
Heater / insulating material | 1.2 kW Stainless pipe heater / Glass wool |
Fan Type | Scirocco fan, Capacitor motor |
Fan Motor | 10W |
Cable hole (right side) | 33mm I.D. 1pc. |
Exhaust port | 33mm I.D. 2pcs. (top) |
Observation window | Optional |
Temp. controller | PID Z control by microprocessor |
Temp. setting method | Digital setting by ▲/▼ key |
Temp. / Info display | Green 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (1°C resolution) |
Timer | 1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operation |
Operation function | Fixed temperature, Program operation (max.99 steps, up to 99 patterns repeat operationing function), Duration/time select timer operation function (fixed temperature operation, auto-start, auto-stop, quick auto stop, program operation auto start) |
Additional functions | Power on and Integration time function (up to 65,535 hours), Calibration offset, Time display, Display of power consumption, CO2 discharge and heater operation, Power failure return mode, User configuration information |
Heater circuit control | Triac zero-cross control |
Sensor | K-thermocouple double sensor (for temperature control and independent overheat prevention device) |
Safety device | Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection |
Earth leakage breaker | Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA |
Independent overheat prevention | Set temperature range: 0~250°C |
Internal dimensions*² W×D×H | 600×500×500 mm |
External dimensions*² W×D×H | 730×696×910 mm |
Internal capacity | 150L |
Shelf plate with standard load | ~15kg/pcs. |
Shelf rest step number / Shelf rest pitch | 13 steps / 30mm |
Power source 50/60Hz | AC115V 11A (with plug) |
Weight | ~77kg |
QuestPair matches professionals in research and industry with manufacturers, suppliers and resellers of scientific products. Companies and organisations can easily sign up for an account and showcase their laboratory equipment and other products on the marketplace. It is possible to list both new as well as used equipment. QuestPair features a variety of equipment for the physical, chemical and life sciences such as spectrometers, balances, centrifuges, testing devices, medical devices, incubators, microfluidics kit, heaters, coolers and other specialist instruments.
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.