Yamato DKL-301C Forced Convection Oven 27L, 115V

MEMMERT UN 450 incubator / oven with natural convection 300°C New equipment, never used In its origi (more)nal packaging. Year of manufacture: 2023 Heating and drying oven with universal adjustment Model: UN450 - new generation Capacity: 449 Liters Temperature range: Ambient +5°C / +300°C Integrated digital temperature display 2 stainless steel grids Power supply: 230 V Frequency: 50-60 Hz Power: 5800 W - three-phase External dimensions L(D) x H(E) x D(F): 1224 x 1247 x 784 mm (D +56mm excluding handle) Internal dimensions L(A) x H(B) x D(C): 1040 x 720 x 600 mm Weight: 161kg On castors with integrated brake Stainless steel wall sheets slightly deformed in a few small places

Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V Temperature Range Ambie (more)nt +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 150L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 150L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V Te (more)mperature Range Ambient +5°C to 70°C Heater Power 1.34 kW Chamber Volume 445L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 445L glassware drying natural and forced convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Mobile on casters. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V includes: - 4 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DG-800C Natural Convection Glassware Drying Oven 445L, 115V Temperature Range Ambient +5°C t (more)o 70°C Heater Power 1.34 kW Chamber Volume 445L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 445L glassware drying natural convection oven with large observation window for easy observation. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Mobile on casters. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-800C Natural Convection Glassware Drying Oven 445L, 115V includes: - 4 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Temperature range: Ambient +10°C to 250°C Warm-up time to 70°C: 50 min Warm-up time to 150°C: 55 min (more) Warm-up time to 250°C: 60 min Recovery time after door opened for 60 s at 70°C: 5 min Recovery time after door opened for 60 s at 150°C: 12 min Recovery time after door opened for 60 s at 250°C: 16 min Capacity: 56 L Dimensions (WxHxD): 696 x 850 x 685 mm Internal dimensions (WxHxD): 396 x 460 x 308 mm Weight: 55 kg

Maximum temperature: 1100°C Minutes to Tmax: 90 Volume: 15 L Internal dimensions (WxDxH): 200 x 340  (more)x 170 mm Dimensions (WxDxH): 440 x 650 x 570 mm Weight: 45 kg

Tuttnauer 2540M Autoclave The Tuttnauer 2540M Autoclave is designed to compliment any healthcare fa (more)cility. The bright new easy-to-use panel was designed with the operator in mind. The 2540M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 14 min, Cold Start 30 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2540M Autoclave includes: - 3 Stainless Steel Trays - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Edwards RV3 Vacuum PumpFeatures - The RV is a truly versatile pump for operation throughout for your (more) operations, perfect for wet applications, dusty applications and clean dry applications. - The RV series of pumps has the highest vapour handling capacity of any rotary vane pump. This is ideally suited for your wet pumping applications such as freeze drying, extraction, filtration and gel drying. - The best-in-class anti-suck back protection prevents dust or oil mist from entering your system. The fast-acting automatic inlet valve acts within 0.4 seconds. - The universal motor in the pump covers the widest possible voltage and frequency range from a single motor. - You can service and replace parts without dismantling the pump mechanism. All parts self-align, eliminating the need for special assembly. Pump valve has "controlled" opening on power startup so that the system vacuum will never see a pressure surge on startup The RV uses a high-quality "universal" motor to cover the widest possible voltage and frequency range. A one-size Allen key is used to dismantle all parts of the RV pump. All rotor and stator parts are completely interchangeable The RV series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications. Click Here to View Product Video INCLUDED: The Edwards RV3 Rotary Vane Vacuum Pump includes: - 1 Liter of Edwards Ultragrade 19 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

The easy-to-use Model 2110 Fraction Collector provides multiple collection modes for chromatographic (more) separations. Key features include: Time or drop collection modes (or volume collection mode when connected to the Model EP-1 Econo Pump, BioLogic LP System, or BioLogic DuoFlow System) Collection of 1 drop (~50 µl) to 9 ml fractions in 80 test tubes Small chromatography columns can be mounted to drop-forming arm to minimize dead volume Manual-advance tube changes Coldroom compatibility Small footprint of 24 x 33 cm Specifications: Capacity: Eighty 13 x 100 mm glass, polypropylene, or polystyrene test tubes Collection basis: 1–999 drops in 1 drop increments, 0.05–9.99 min in 0.01 min increments, 10.0–99.9 min in 0.1 min increments Construction: Case and carousel, polypropylene; front panel, hard-coated polycarbonate Drop former: Silicone rubber Waste outlet tube: Polyurethane Operating temperature: 4 – 40°C Safety: Meets IEC 61010 and CSA 22.2 certification Dimensions (WxDxH): 240 x 330 x 250 mm

Temperature range: Ambient +5°C to 220°C Spatial temperature deviation (at 220°C): ±7 K Time tempera (more)ture deviation (at 220°C): <±1 K Hetaing up time (to 98% of set value): 80 min Heat transfet to the enviroment at 220°C: 500 Wh/h Dimensions (WxDxH): 820 x 588 x 589 mm Internal dimensions (WxDxH): 500 x 380 x 408 mm Capacity: 78 L