Yamato DG-800C Natural Convection Glassware Drying Oven 445L, 115V

BINDER BF-115 incubator / drying oven with forced convection 100°C Model: BF115 Capacity: 115 liters (more) Temperature range: Room temperature plus 5 °C to 100 °C With forced ventilation Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 73 kg Tested at 37°C Year of manufacture: 2010

Binder BFED 53 Hybridisation Oven Rotisserie Shaker This item was removed from a university lab wher (more)e it was surplus to requirements. The oven powers on and is in good cosmetic condition. It features a speed-adjustable shaking platform and a rotisserie bottle holder with 12 bottle slots. The glass inner door is intact, and all mechanical functions such as the rotisserie and shaking platform are operational. The unit is in good working order (thermometer not included). Specifications:- Maximum oven temperature: 100˚C - Rotisserie bottle holder: 12 places - Glass inner door Model: BFED 53Serial No.: 01-27712

Yamato FP-103 High Performance Muffle Furnace 1.5L, 115V Operating Temperature Range 100°C to 1150° (more)C Max. Temperature Reaching Time ~90 min. Internal Capacity 1.5L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 1.5L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-103 High Performance Muffle Furnace 1.5L, 115V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V Temperature Range Ambient +10°C to 2 (more)60°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 150L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports Programmable 150L forced convection constant temperature oven with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

RETSCH stainless steel test sieve 400x65mm - 2.5mm New equipment in its original packaging Reference (more): 60.166.002500 Frame material: Stainless steel Quantity: 1/box For use with (equipment): AS 450 Vibration Stirrer Height (metric): 65 mm External diameter (metric): 400mm Porosity: 2.5mm

ÄKTAxpress is a liquid chromatography system intended for automated, multi steppurification processe (more)s. The system has been developed and optimized for purificationof Histidine-tagged and Glutathione S-Transferase (GST)-tagged recombinant proteins from clarified or crude cell lysates. ÄKTAxpress supports a number of purification protocols containing up to four chromatography steps, for example, affinity chromatography followed by desalting, ion exchange, and gel filtration. Protocols for purification of both low expressed proteins and well expressed proteins are included. Also protocols supporting purification of double tagged proteins and protocols that can be combined with on-column and off-line (batch) tag cleavage are provided. ÄKTAxpress provides the following features: •Automatic purification of up to four samples in a single run. •Purification protocols containing up to four chromatography steps. •Automated on-column affinity tag removal in the first step of purification protocols starting with an affinity/ion exchange chromatography step. •Purification protocols supporting purification of both well expressed and low expressed proteins, double tagged proteins and proteins that have been cleaved off-line. •Up to 50 mg of protein can be purified per sample. •Up to twelve ÄKTAxpress systems can be run in parallel, controlled from one computer (not included). Different purification protocols can be run simultaneously. •The systems can be placed next to each other or they can stand separately if preferred. Flow rate: 0.1 – 65 mL/min Flow rate accuracy: ±2% or ±0.02 ml/min whichever is greater Flow rate reprocibility: RSD < 0.5% Pressure range: 0 – 30 bar Step gradients (quasi-isocratic mixing) formation conditions: Water based buffers with different concentrations of salts Gradient mmix proportions: 5 – 95% Concentration accuracy: ±2%B Linear gradients conditions: Water based buffers with different concentrations of salts Linearity: ±2%B within 20 – 80%B UV monitor wavelengths: 280 and 254 nm set by lamp position and filter Optical path length: 2 nm Opitcal cell volume: 2 µL Detector cell volume: 30 µL Absorbance range: 0.01 – 5 AU Auto zero range: -0.2 – 2.0 AU Linearity, deviation: < 3% up to 2 AU Static noise, short and long term: < 40 μAU Static drift: ±0.1 mAU/h Conductivity range: 0.01 – 300.00 mS/cm Accuracy: Max. ±2% of full scale calibrated range or ±0.1 mS/cm whichever is greater Reproducibility, short and long term: Max. ±1% or ±5 μS/cm whichever is greater Noise: Max. ±0.5% of full scale calibrated range, typically ±0.1% Response time: Max. 4 s (0–95% of step) Internal volume: 24 μl Dimensions (WxdxH): 250 x 490 x 660 mm Weight: 30 kg

Speed: 100 to 14680 rpm (50 rpm increments) RCF: 1 to 20238 x g (50 x g increments) Run time: 30s to (more) 9:59 h, infinitely (0.5 min increments up to 10 min, thereafter in 1 min increments) Dimensions (WxDxH): 236 x 320 x 227 mm Weight: 13.4 kg Equipped with: 1x Eppendorf FA-45-24-11 biocontainment lid 1x Eppendorf FA-45-24-11 fixed angle rotor (max 15000 rpm; 24x 1.5 mL/2.0 mL micro test tube capacity)

This Thermo Spectronic Genesys 10 VIS UV/VIS Spectrometer was removed from a university lab where it (more) was surplus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Lamp hours: 1152.73

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance&rsquo;s accuracy and sensitivity. 10-Inch Display Bigger screen &ndash; 10&rsquo;&rsquo; &ndash; means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light &ndash; An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note &ndash; Note Down Your Conclusions It&rsquo;s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

IKA ROTAVISC me-vi HELI Complete Viscometer Speed Range 0.01 - 200 rpm Setting Accuracy Speed 0.01  (more)±rpm Time Setting Range 0.017 - 6000 min Features - Measures medium viscous liquids in various settings, from labs to quality control. - Includes spindle set, protective bracket, temperature sensor, and HELISTAND with T-spindle. - 4.3″ TFT display for intuitive menu navigation. - Digital spirit level aids in correct setup of start-up conditions. - Simple ramp function for easing repetitive tasks. - Accuracy: +/- 1% deviation and +/- 0.2% reproducibility for diverse fluids. - Offers stepless speed adjustment for precise viscosity measurement. - Motorized HELISTAND enables dynamic measurement with uniform motion. Regardless of a simple or demanding viscosity measurement - IKA ROTAVISC me-vi HELI Complete determines the viscosity of medium viscous liquids in all areas of application ranging from the laboratory to quality control. The scope of delivery includes a standard spindle set (SP 7-SP 12), a protective bracket, temperature sensor and HELISTAND stand incl. T-spindle set. Easy to operate The generous 4.3″ TFT display allows for an intuitive menu guidance. A digital spirit level also supports the correct set-up of the start-up condition. The simple ramp function simplifies repetitive tasks. Highest measurement accuracy The level of measurement accuracy of the ROTAVISC rotational viscometer for both Newtonian and non-Newtonian fluids is +/- 1 % of the measuring range. The reproducibility is +/- 0.2 %. Stepless speed ROTAVISC is a viscometer, which offers stepless speed adjustment. Viscosity measurement in motion The motorized IKA HELISTAND moves the mounted viscometer and its rotating body slowly and uniformly up and down in the sample ROTAVISC me-vi HELI Complete Viscosity measuring range: 100 - 40.000.000 mPas Click Here to View Product Video INCLUDED: The IKA ROTAVISC me-vi HELI Complete Viscometer includes: - ROTAVISC me-vi HELI Complete - SP set-2 - PT 100.8 - HELISTAND - T-SP-SET - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty