Retsch Woven Wire Mesh Test Sieve 355 µm Sieb Stainless Steel SS 400 x 65mm 40cm

BINDER CB210 Co2 Incubator / Drying Oven Nominal temperature: 187 ° C Internal volume: 210 l (CB 210 (more)) Temperature range: 7 to 60 ° C CO2 range: 0 to 20% CO2 volume Adjustment accuracy: 0.1% CO2 volume CO2 measurement: IR Nominal voltage: 230 V, single-phase unit Nominal current: 6.6 Amp Power frequency: 50/60 Hz External dimensions (W x H x D): 740 x 1069 x 715 mm Number of doors: 1 Number of internal glass doors: 1 Internal dimensions (W x H x D): 560 x 750 x 500 mm Number of perforated shelves made of stainless steel 1.4301 / V2A: 3 Shelf size (external) (W x D): 556 x 444 mm Empty weight: 121 kg Tested at 37°C CO2 at 5% (6.2% measured) Year of manufacture: 2003 Please note, slight modification to the door for padlock closure. See photos

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2007 Tested at 37°C and -2°C

Thermo Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. The shaking plate and Rotisserie shaker are both in good working order. It is in good cosmetic condition with minor marks.

Memmert VO49 Vacuum Oven 49L, 230V Temperature Range Ambient +5°C to 200°C Vacuum Range 5 to 1100 m (more)bar Chamber Volume 49L (1.7 cu. ft.) Features - Direct contact between load and heatable thermoshelves ensures rapid and uniform temperature control - Digital pressure control for rapid, gentle drying, optimizing process safety for delicate materials - Optional speed-controlled vacuum pump available, enhancing energy efficiency by approximately 70% - Multi-level heating and sensing system with individually placeable, calibratable thermoshelves for precise temperature adjustments - VDE-tested anti-splinter door construction enhances safety across all operational models - Constructed from high-quality, rust-resistant stainless steel for durability and ease of cleaning - User-friendly operation with intuitive AtmoCONTROL software programming - Integrated data logger and multiple interface options for comprehensive documentation and control - Energy-saving features and chemical-resistant components extend service life and reduce operational costs The Memmert VO49 Vacuum Oven 49L, 230V stands as a pinnacle of efficiency and precision in the field of vacuum drying. Designed for diverse applications such as drying food, cosmetics, electronic components, and more, this oven guarantees rapid and uniform temperature control through its direct contact between the load and heatable, removable thermoshelves, ensuring no heat loss. This model features digital pressure control that facilitates rapid yet gentle drying, optimizing the process for delicate materials. The VO49 is engineered with a multi-level heating and sensing system, which includes individually placeable thermoshelves equipped with separate sensors for accurate temperature control and short process times. This system reacts dynamically to different loads or humidity levels, maintaining a constant set temperature crucial for effective vacuum drying. Additionally, each thermoshelf can be individually calibrated to meet specific testing requirements. While the VO49 oven itself is robust and reliable, it is worth noting that the speed-controlled vacuum pump, which enhances the system's energy efficiency by approximately 70%, is available as an optional accessory and is not included as standard. This pump is designed to be chemical-resistant and operates with a low final vacuum of up to 2 mbar, significantly extending the service life of membranes and reducing operational costs. Constructed from high-quality, rust-resistant stainless steel that is easy to clean, the VO49 offers a user-friendly and intuitive operating experience. It is fully programmable via the AtmoCONTROL software, comes with an integrated data logger, and multiple interface options for comprehensive programming and documentation. This makes the Memmert VO49 Vacuum Oven a versatile and essential tool for any lab needing precise and efficient vacuum drying capabilities. INCLUDED: The Memmert VO49 Vacuum Oven 49L, 230V includes: - 2 x Thermoshelves - 4 x Locking Hooks for Thermoshelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN160PA Natural Convection Paraffin Oven 161L, 115V Setting Temperature Range +20°C to +80 (more)°C Setting Temperature Accuracy 0.1 °C Chamber Volume 161 L (5.7 cu. ft.) Features - Spacious 161 L (5.7 cu. ft.) internal volume for versatile storage - Temperature range from min. 5°C above ambient up to +80°C, with 0.1°C accuracy - Equipped with 2 Pt100 sensors for precise temperature monitoring and error handling - TwinDISPLAY control panel with adaptive multifunctional PID-microprocessor and high-definition TFT-color displays - Adjustable timer with digital backwards counter, customizable from 1 minute to 99 days - Natural convection and AtmoCONTROL software for efficient, programmable operation - Integrated AutoSAFETY and autodiagnostic system for enhanced safety and fault detection - Durable, nearly gas-tight stainless steel interior reinforced with deep drawn ribbing and protected heating The Memmert UN160PA Natural Convection Paraffin Oven 161L, 115V is designed to meet the highest demands for precision, safety, and flexibility in laboratory heating applications. Offering a spacious 161 L (5.7 cu. ft.) internal volume, this oven provides a wide temperature range from a minimum of 5°C above ambient up to +80°C, maintaining an accuracy of 0.1°C. Equipped with dual Pt100 sensors in a 4-wire circuit, the oven ensures precise temperature control with automatic error handling, guaranteeing uninterrupted performance. The advanced TwinDISPLAY control panel features an adaptive PID-microprocessor, supported by two high-definition TFT-color displays, enabling easy monitoring and adjustment. With natural convection and AtmoCONTROL software, the UN160PA allows for efficient programmable operation and seamless data management via USB or Ethernet. The integrated AutoSAFETY system with audible and visual alarms actively monitors temperature limits to prevent overheating, while an autodiagnostic system facilitates rapid fault analysis. Its durable stainless steel interior is nearly gas-tight and reinforced with deep drawn ribbing for optimal heating distribution, supporting loads up to 462 lbs. This oven combines precision and safety with an easy-to-clean design, making it ideal for laboratories demanding dependable performance and flexibility. INCLUDED: TheMemmert UN160PA Natural Convection Paraffin Oven 161L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA Oven 125 Control Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 300 °C Ope (more)rating Area Inner chamber 550 x 525 x 450 mm Features - IKA Oven 125: High-performance drying cabinets for precise temperature tasks. - Rapid heating and precise control for reproducible results in labs and research. - 125 l interior with high-quality insulation reduces odours and operating costs. - Heats up to 300°C with enhanced security features for temperature monitoring. - Well-lit interior with up to 6 shelves, automatic fan-off when door opens. - Interface for extra sensor and USB for direct temperature regulation and data storage. - Two TFT displays for process parameters, with intuitive user interface for profiles. - Real-time clock for digital documentation and time-delayed start enhances operation. The models in the IKA Oven 125 dry series are powerfuldrying cabinets for temperature regulation, drying, ageing and heating tasks.Rapid heating and exact temperature regulation guarantee reproducible resultsin industrial laboratories, schools and universities, research, quality controlor science. Thanks to its high quality insulation, the device has a very largeinterior of 125 l in relation to its total volume. This structure also reducesodour emissions and operating costs and ensures excellent temperatureuniformity. The Oven 125 control dry recirculating air drying cabinet heats up to 300 °C.The additional temperature selection limited TWB (DIN 12880) meets the highestsecurity requirements. Furthermore, the temperature curve can be monitored duringtesting independently of the safety temperature. This means that your testmaterial is always protected. A well thought out interior The generously dimensioned interior of the Oven 125 control dry is comfortablyilluminated. A practical cable bushing at the rear of the device is provided asstandard for measurements in the oven or in the test material. The fan switchesoff automatically if the door is open. Up to 6 insertable shelves can beaccommodated in the interior made of stainless steel. Interfaces The Oven 125 control dry offers an interface for an additional sensor fordirect temperature regulation in the test material. Test parameters can bestored directly on a USB stick. Two displays All important process parameters are displayed clearly on two large TFTdisplays. The temperature profiles and individual user profiles can be enteredvia the intuitive user interface. The real-time clock enables convenientdigital documentation and a time-delayed start. Click Here to View Product Video INCLUDED: The IKA Oven 125 Control Drying Oven includes: - IKA Oven 125 control - dry - IO T 1.00 (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Control Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 300 °CAdjustable safety circuit50 - 320 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature displayyesTimeryesTimer displayLCD Time setting range1 - 142560 minNumber of trays max.6 Load for one tray max.30 kg Operating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight82 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1600 WPower input standby2 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Dispersion rod S 25 KV - 25G for IKA T25 digital ULTRA-TURRAX New material in original packaging For (more) homogenizer IKA T25 digital ULTRA-TURRAX Model: S 25 KV - 25 G (S25KV-25G) Processed capacity (H2O): 0.05 - 2 l Stator diameter: 25 mm Rotor diameter: 17 mm Stator-rotor gap: 0.5 mm Max. permissible speed : 25000 rpm Peripheral speed : 22.2 m/s Immersion depth : 40 - 225 mm Total length : 270 mm Material in contact with the product : FFPM / SIC, AISI 316L, AISI 302 pH 2 - 13 Solvent resistant : yes Max. working temperature : 220 °C Sterilization methods : all methods Vacuum : 1 mbar Max. pressure : 6 bar Final fineness, suspension : 15 - 50 µm Final fineness, emulsions : 1 - 10 µm Weight : 0.6 kg

Zeiss Axiophot Fluorescent Microscope Lab This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and powers on, it has been tested with in-house test objectives. (Objectives not included) This microscope includes: 2 x Pl 10x / 25 Eyepiece (44 40 34)

Scilogex SCI100-S Rotary Evaporator w/ Coiled Condenser, 110V Speed Range 20 to 200 RPM Temperature (more) Range Ambient to 180C Lift Stroke 150mm Features - Digital display of both rotation speed and heating temperature allows for optimal control of all distillation processes - 5L heating bath, temperature range from room temp. to 180C, with independent control - Patented condenser (cooling surface 1200cm²) with excellent cooling effect - Manual lift combined with auxiliary lift for precise positioning - Speed range from 20 to 200rpm, and interval operation in clockwise and anticlockwise directions for drying process - Overheating/boil dry protection - Timer function for precise control processing - Chemical-resistant PTFE seals and patented pressure springs provide excellent sealing - Precise temperature control and adjustable safety circuit - Quick release connectors for easy flask removal - Ejection mechanism ensures easy removal of evaporating flask - Patented double spring sealing ring which is made of PTFE provides excellent sealing performance - Remote function provides PC control and data transmission The Scilogex SCI100-S Rotary Evaporator w/ Coiled Condenser is an essential instrument in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. It offers an excellent distilling solution in a wide range of applications. INCLUDED: The Scilogex SCI100-S Rotary Evaporator w/ Coiled Condenser, 110V includes: - Coiled Condenser - 5L Heating Bath - 1L Evaporation Flask - 1L Receiving Flask - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco CentriVap Aqueous SystemIdeal forbiology, microbiology, biochemistry, pharmaceutical resear (more)ch, and analyticalchemistry laboratories, centrifugal concentrators quickly process theevaporation of multiple small samples. Benchtop Vacuum Concentrators feature30.5cm (12") dia. epoxy-coated aluminum chambers to accommodate a wideselection of high-capacity rotors. A microprocessor controls centrifugal motionto eliminate bumping and foaming during vacuum evaporation. The brushless motorhas a maximum speed of 1725rpm. A large automatic vacuum release valve preventsloss of sample by quickly releasing the vacuum before the rotor stops. Duringstartup, a built-in vacuum delay prevents bumping by allowing the rotor toachieve set speed before applying vacuum. Up to nine user-set programs may bestored to define temperature, heat time, and run time. Program temperature andtime may be altered while the program is being run. Timer may be set for 1 to999 minutes. An easy-to-read LCD shows program number, actual and set pointtemperatures, heat time, run time, and a heat boost indicator. The controlpanel features three Quick-Start* buttons that each store one user-set program.An audible alarm signals completion of set point run time. INCLUDED: The Labconco 7982010 CentriVap Aqueous System, 115V, 60Hz includes: - Benchtop Vacuum Concentrator - Cold Trap -50°C - Clear Canister 7460900 - Moisture Insert 7814900 - 12-13 mm Rotor 7455100 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) Th (more)e qMAX Green One-Step RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysin which intercalating dye-based detectionprovides the option of a post amplificationmelt profile. The mix is powered by HSTaq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Green One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty