Memmert VO49 Vacuum Oven 49L, 230V

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order when heated to 36ºc, when set to 100ºc item would not climb beyond 60ºc. The shaking plate and Rotisserie shaker are both in good working order. It is in reasonably good cosmetic condition with surface damage present.

Yamato SDP-300 Benchtop Vacuum Oven 47.2L, 110-120V Operating Temperature Range +10-220°C Operatin (more)g Pressure Range 10 - 101 kPa Internal Volume 47.2L Features - Programmable Watlow controller to perform multiple ramp and soak profiles - Digital vacuum gauge displaying vacuum level of chamber - Doors with positive latch handles and spring-loaded glass facilitating good vacuum seal - Tempered glass viewing window for safe, continuous monitoring of samples - Generous usable shelf area - Meets TUV safety requirements Meet the SDP Series Vacuum Oven, an indispensable addition to your laboratory toolkit. Available in both SDP300 and SDP310 models, this versatile oven offers precise control and dependable performance. With an operating temperature range from room temperature +10°C to 220°C and an operating vacuum range from 40-3.0 to -29.9 inHg, it's suitable for a wide range of applications. The EZ-ZONE Watlow controls ensure ease of use, while the KF25 access port allows for convenient access. Experience exceptional temperature uniformity, with ± 6.0% of setpoint at midrange, and remarkable stability with ± 0.1°C at 80°C, ± 0.20°C at 150°C, and ± 0.3°C at 220°C. Heat up times are impressively fast, and cool down times are efficient. This digital controller boasts a display resolution of 0.1°C and is constructed with high-quality materials both inside and out. The interior boasts 300 SST, while the exterior is made of painted cold roll steel. You'll find a silicone gasket for a standard chamber seal, and the spacious internal dimensions of W304 x D508 x H304 mm provide ample room for your samples. With a total internal capacity of 47.2L and three sturdy shelves, each capable of holding up to 15.8 kg, this oven is well-suited for various applications. The SDP Series Vacuum Oven is available in two power source options (AC110 - 120V 10A or AC220 - 240 5.5A) and is a reliable workhorse for your lab, weighing in at ~83kg. It comes complete with three shelves, a power cord, and four leveling feet, making it a versatile and essential tool for your laboratory needs.INCLUDED: The Yamato SDP-300 Benchtop Vacuum Oven 47.2L, 110-120V includes: - 3 Shelves (2 tall, 1 short bottom) - 4 Leveling Feet - Power Cord - One Year Manufacturer's Warranty

Yamato FO-710CR Muffle Furnace with Communication Port 23.6L, 220V Operating Temperature Range 100° (more)C to 1150°C Max. Temperature Reaching Time ~80min. Internal Capacity 23.6L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device - Selectable options include an exhaust system unit, N₂ gas loading device, a temperature output terminal, a time up/alarm output terminal, and a sample tray Standard 23.6L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-710CR Muffle Furnace with Communication Port 23.6L, 220V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Oven 125 Basic Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 250 °C Opera (more)ting Area Inner chamber 550 x 525 x 450 mm Features - Temperature range: RT + 5°C to 250°C - Capacity: 125 l - Electronically adjustable ventilation - Clear display and control menu - Key lock function - Timer - Adjustable temperature limit Universal oven for tempering, drying, aging and heatingapplication in the laboratory. The IKA OVEN 125 basic dry covers applications in industry, schools /universities, research, quality control and science. Fast heat up times and a precise temperature control guarantee reproducibletest results. A special odorless insulation also ensures lower operating costs. The oven can be controlled by USB and test parameters can be recorded forfurther analyses. INCLUDED: The IKA Oven 125 Basic Drying Oven includes: - IKA Oven 125 basic dry - Wire grid tray, chrome plated (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Basic Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 250 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature display yesTimer yesTimer display 7 segment LEDTime setting range1 - 144000 minNumber of trays max.6Load for one tray max.30 kgOperating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight74 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20USB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1550 WPower input standby1 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items come from a variety of university laboratories. The items were no longer requi (more)red, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-37784 Finnigan MAT GCQ Gas ChromatographITEM-37773 TC Electronic RS 410ITEM-17249 Perkin Elmer DNA Thermal Cycler LabITEM-23961 2 x Faulty De Soutter Medical Clean Cast Systems CCS5 X2 -ITEM-24233 Sutter Industries Lambda 10-B Smart Shutter Wheel Drive ControllerITEM-35358 CETI TOPIC-B Laboratory Compound Binocular Microscope w/ 3 ObjectivesITEM-37878 ATB MOTOR ABF 63/4A-7QR Vacuum PumpITEM-29867 Eurotherm 903P/IS/HLO//ARE/SRE/VH/XN///LE IT/HAP//AP/SP////0/1200/C/05ITEM-24225 MSE Micro Centaur CentrifugeITEM-38498 UNI-T UT804 True RMS MultimeterITEM-38762 A Pair of Bio-Rad 1000/500 Electrophoresis Power Supplies

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

Polyscience P10N6A101B IP-100 Immersion Probe Cooler, 3 Rigid Coil Probe, -100 to -60C, 120V, 60Hz3D (more) Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P10N6A101B IP-100 Immersion Probe Cooler, -100°C to -60°C, 85W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty