Memmert UN160plus Natural Convection Oven 161L, 115V

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2010 Tested at 37°C and -2°C

DO305 Karl Fischer drying oven is ideal for the accurate determination of the water content of solid (more) or viscous samples, such as: Substances that release the water only at a high temperature, such as plastic in powder or granular form     Substances that cause lateral reactions with the Karl Fischer reagent, such as oxidizing inorganic salts     Substances that cause problems in the titration vessel because of their consistency, such as fibrous or pasty substances     Substances that are poorly soluble or insoluble, such as wool, dough, tar and coal

This Carbolite Laboratory Furnace Type VCF 12/5 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks from use.

Yamato DKL-301C Forced Convection Oven 27L, 115V Temperature Range Room temp. +10~260°C Temperature (more) Distribution Accuracy ±2.5°C (at 260°C) Chamber Volume 27L Features - Fixed temperature, Quick auto stop, Auto stop, and Auto start operating modes with easy control capabilities - Settings can be made digitally with the dedicated operation menu keys or the ▲/▼ keys - Calibration off-set as auxiliary function - Self-diagnostic functions, MCB with over current protector, hydraulic standalone overheat prevention device Economical forced convection 27L constant temperature oven with basic functions and safety features. Fixed temperature, Quick Auto stop, Auto stop, and Auto start operating modes with easy control capabilities. Settings can be made digitally with the dedicated operation menu keys or the ▲/▼ keys. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKL-301C Forced Convection Oven 27L, 115V includes: - 2 Stainless Steel Shelves - 4 Shelf Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF75plus Forced Circulation Oven 74L, 115V Working Temperature Range Min. 10°C above ambien (more)t up to +300°C Oven Type Forced Air Circulation Chamber Volume 74 L (2.61 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 74 L (2.61 cu.ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF75plus Forced Circulation Oven 74L, 115V is a versatile and high-performance oven designed to meet the rigorous demands of laboratory applications. Its working temperature range from 10°C above ambient to +300°C provides the flexibility needed for various thermal processes. Equipped with TwinDISPLAY, this oven offers precise control through its multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays, ensuring reliable and easy monitoring of all critical parameters. The 74L (2.61 cu.ft.) chamber, with its stainless steel interior and deep-drawn ribbing, allows for uniform heating, while its easy-to-clean design adds to its convenience and longevity. The UF75plus prioritizes safety with comprehensive mechanisms such as the overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB. These features are further enhanced by AutoSAFETY technology, which includes over- and undertemperature monitoring, ensuring that any deviations trigger timely alarms. The oven's advanced functionality is supported by the AtmoCONTROL software, allowing users to program, manage, and transfer data through a USB or Ethernet interface. With additional features like Function SetpointWAIT, which ensures the process begins only when the target temperature is reached, and the ability to adjust fan speed and fresh air admixture in 10% increments, the UF75plus is a top-tier solution for precise, safe, and efficient thermal processing. INCLUDED: TheMemmert UF75plus Forced Circulation Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UF160plus Forced Circulation Oven 161L, 115V Working Temperature Range Min. 10°C above ambi (more)ent up to +300°C Oven Type Forced Air Circulation Chamber Volume 161 L (5.69 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 161 L (5.69 cu.ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF160plus Forced Circulation Oven 161L, 115V is a high-performance oven designed to meet the demands of professional laboratory and industrial applications. With a working temperature range from 10°C above ambient up to +300°C, it offers flexibility for a variety of thermal processes. Its spacious 161L (5.69 cu.ft.) chamber provides ample room for multiple applications, while the TwinDISPLAY system, featuring dual high-definition TFT-color displays, allows for precise control via the adaptive multifunctional digital PID-microprocessor controller. The oven ensures that the process begins only when the desired temperature is reached, thanks to the Function SetpointWAIT. In addition to its advanced performance, the UF160plus prioritizes safety with an overtemperature monitor (TWW), adjustable temperature limiter (TWB), and mechanical temperature limiter (TB), all integrated to prevent overheating. The oven’s AutoSAFETY system continuously monitors over- and undertemperature conditions, triggering alarms in case of deviations. The stainless steel interior, reinforced with deep-drawn ribbing and four-sided integrated heating, ensures uniform temperature distribution and is easy to clean for optimal durability. With AtmoCONTROL software for programming and data management via USB or Ethernet, and a load capacity of up to 462 lbs, this oven is a reliable, robust solution for precise thermal processing in demanding environments. INCLUDED: TheMemmert UF160plus Forced Circulation Oven 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Bain Marie LAUDA AQUALINE AL12 Model: Aqualine Al 12 Voltage: 230V, 50Hz Power: 1 kW Temperature ran (more)ge: +25°C to +95°C Content: 2 to 12 liters. External dimensions (L) x (D) x (H): 35 x 33.5 x 35 cm Internal dimensions (L) x (D) x (H): 33 x 30 x 15 cm

BrandTech Scientific Transferpette S Pipette Set, 0.1 to 1000ul Adjustable or Fixed Volume Adjustabl (more)e Pipette Models Included D-2.5, D-10, D-20, D-200, & D-1000 Pipette Type Air Displacement Features - Ergonomic design ensures a comfortable grip for all hand sizes and both right- and left-handed users - True one-handed operation allows for easy volume setting, pipetting, and tip ejection without changing grip - Low operating forces and short stroke enable relaxed pipetting during extended use - Volume-change protection prevents accidental adjustments and is easy to operate even with gloves - Easy Calibration technology allows quick, tool-free calibration for consistent accuracy - Slim design allows easy access to narrow tubes, including 15 mL conical centrifuge tubes - Fully autoclavable at 121°C for easy sterilization and contamination prevention - High chemical and UV resistance for long-lasting durability in demanding lab environments The BrandTech Scientific Transferpette S Pipette Set, 0.1 to 1000 µL offers exceptional precision, ergonomic comfort, and efficiency for a wide range of liquid handling tasks. Designed with user-friendly features, this air displacement pipette ensures relaxed operation even during long pipetting sessions, thanks to its low operating forces and short stroke. Its ergonomic design provides a secure, comfortable grip for both right- and left-handed users, accommodating hands of all sizes. True one-handed operation allows users to easily set volumes, pipette, and eject tips without changing their grip, enhancing workflow efficiency. The Transferpette S includes a volume-change protection feature that prevents accidental adjustments and can be easily operated while wearing gloves, ensuring reliability and reproducibility of results. Its Easy Calibration technology allows for quick, tool-free calibration, maintaining consistent accuracy. A universal tip cone ensures compatibility with various pipette tips, and color-coded accents make tip selection simple. The pipette is fully autoclavable at 121°C for easy sterilization and offers high chemical and UV resistance for durability in demanding lab environments. Designed for performance and comfort, the Transferpette S Pipette Set is the ideal solution for precise and efficient liquid handling.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette S Pipette Set, 0.1 to 1000ul includes: - 5 Pipettes (D-2.5, D-10, D-20, D-200, D-1000) - 3 x TipBox (0.5 to 20 ul, 2 to 200 ul, 50 to 1000 ul) - Bench Top Carousel for 6 Devices - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-81 swing-out rotor (max 4000 rpm) 4x Eppendorf bucket 4x Eppendorf bucket aerosol-tight lid 4x Eppendorf MTP carrier 4x Eppendorf insert (10x 15 mL falcon tube capacity) 4x Eppendorf insert (5x 50 mL falcon tube capacity)

Life Technologies Ion Torrent OneTouch 2 & ES System This was removed from a university lab whe (more)re it was surplus to requirements. The system powers up and is in good cosmetic condition with minor marks. Included are; Ion Torrent OneTouch 2Ref. INS1005527SN - 2456280-0958 Ion Torrent OneTouch ESModel - 844 1-21SN - 402237

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

F2 Mass Standard - rectangular weights. Nominal value - 25 kg.