Memmert UN160PA Natural Convection Paraffin Oven 161L, 115V

Memmert UN260 Natural Convection Oven 256L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 256 L Features - Spacious 256 L (9 cu.ft.) stainless steel chamber for diverse sample sizes - Temperature range from +5°C above ambient to +300°C for various applications - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature control - SingleDISPLAY digital PID-microprocessor with high-definition TFT color display - Natural convection system provides uniform heating throughout the chamber - Electronically adjustable air flap for controlled pre-heated fresh air - Supports up to 9 stainless steel grids, with a max load of 263 lbs - Auto diagnostic system and overtemperature monitor for enhanced safety The Memmert UN260 Natural Convection Oven 256L, 115V offers versatile laboratory heating with a spacious 256 L (9 cu.ft.) stainless steel chamber, ideal for a range of sample sizes. Its temperature range from +5°C above ambient to 300°C and precise control, enabled by a Pt100 sensor DIN class A in a 4-wire circuit, ensure optimal accuracy. Equipped with a SingleDISPLAY digital PID-microprocessor and high-definition TFT color display, this oven makes temperature adjustments intuitive and precise. The natural convection system promotes uniform heating, and the electronically adjustable air flap allows controlled pre-heated fresh air intake. Built to support up to 9 stainless steel grids with a maximum load of 263 lbs, the UN260 also includes an auto diagnostic system and overtemperature monitor for safe, reliable operation in demanding environments. INCLUDED: The Memmert UN260 Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V Operating Temperature Range 100°C to 1150° (more)C Max. Temperature Reaching Time ~90 min. Internal Capacity 7.5L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 7.5L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DX-402C Natural Convection Oven 74L, 115V Temperature Range Ambient +5°C to 300°C Temperatur (more)e Distribution Accuracy ± 10°C at 300°C Chamber Volume 72L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-402C Natural Convection Oven 74L, 115V is an economical, high-capacity oven designed for precision heating, featuring a spacious 74L interior. Equipped with a digital PID controller, it offers easy operation with modes like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven efficiently maintains temperatures from room temperature +5°C to 300°C with an excellent control accuracy of ±1°C and distribution accuracy of ±10°C at 300°C. It reaches its maximum temperature in about 60 minutes. Constructed for durability, it has a stainless-steel interior and an electro-galvanized steel sheet exterior with a melamine resin baking finish. Insulation is provided by glass wool, and heating is achieved with a 1.36 kW iron-chrome wire heater. It includes two exhaust ports, each 33 mm in diameter, located on top, and features microprocessor controlled PID temperature control with digital setting and display, alongside a comprehensive timer. Safety is prioritized with self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 450x410x400mm, and the external dimensions are 550x540x730mm. The oven supports a shelf plate load of 15kg, offering nine shelf rest steps with a 35mm pitch. Weighing approximately 38kg, it is compatible with AC115V 14A and is an ideal choice for users needing a larger, reliable, and easy-to-use convection oven for various applications. INCLUDED: The Yamato DX-402C Natural Convection Oven 74L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IO T 1.10 Enhanced wire grid tray Drying oven enhanced wire grid tray Dimension (L x D):546 mm x 410 (more) mmMax. loading capacity: 60 kg The IO T 1.10 Enhanced wire grid tray Drying oven enhanced wire grid tray is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.

IKA Oven 125 Control Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 300 °C Ope (more)rating Area Inner chamber 550 x 525 x 450 mm Features - IKA Oven 125: High-performance drying cabinets for precise temperature tasks. - Rapid heating and precise control for reproducible results in labs and research. - 125 l interior with high-quality insulation reduces odours and operating costs. - Heats up to 300°C with enhanced security features for temperature monitoring. - Well-lit interior with up to 6 shelves, automatic fan-off when door opens. - Interface for extra sensor and USB for direct temperature regulation and data storage. - Two TFT displays for process parameters, with intuitive user interface for profiles. - Real-time clock for digital documentation and time-delayed start enhances operation. The models in the IKA Oven 125 dry series are powerfuldrying cabinets for temperature regulation, drying, ageing and heating tasks.Rapid heating and exact temperature regulation guarantee reproducible resultsin industrial laboratories, schools and universities, research, quality controlor science. Thanks to its high quality insulation, the device has a very largeinterior of 125 l in relation to its total volume. This structure also reducesodour emissions and operating costs and ensures excellent temperatureuniformity. The Oven 125 control dry recirculating air drying cabinet heats up to 300 °C.The additional temperature selection limited TWB (DIN 12880) meets the highestsecurity requirements. Furthermore, the temperature curve can be monitored duringtesting independently of the safety temperature. This means that your testmaterial is always protected. A well thought out interior The generously dimensioned interior of the Oven 125 control dry is comfortablyilluminated. A practical cable bushing at the rear of the device is provided asstandard for measurements in the oven or in the test material. The fan switchesoff automatically if the door is open. Up to 6 insertable shelves can beaccommodated in the interior made of stainless steel. Interfaces The Oven 125 control dry offers an interface for an additional sensor fordirect temperature regulation in the test material. Test parameters can bestored directly on a USB stick. Two displays All important process parameters are displayed clearly on two large TFTdisplays. The temperature profiles and individual user profiles can be enteredvia the intuitive user interface. The real-time clock enables convenientdigital documentation and a time-delayed start. Click Here to View Product Video INCLUDED: The IKA Oven 125 Control Drying Oven includes: - IKA Oven 125 control - dry - IO T 1.00 (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Control Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 300 °CAdjustable safety circuit50 - 320 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature displayyesTimeryesTimer displayLCD Time setting range1 - 142560 minNumber of trays max.6 Load for one tray max.30 kg Operating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight82 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1600 WPower input standby2 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Mini Portable Dry Bath Incubator Mix&Match Block Pad3-100c COYOTE New equipment in its original pack (more)aging Delivered without aluminum blocks Reference: Pad3-100c series chilling/heating dry baths accommodate half of the blocks of a H2O3 dry bath.The mini dry bath is very compact and economical,and it plays a role of all-in-one small box combining the functions of ice box,refrigerator,incubator,water bath,circulator,heater and etc.It works like a laptop,and is a perfect device"mate"for reagents. Temperature Range: 0-100ºC Display precision: 0.1ºC Temperature precision: ±0.2ºC Temperatureevenness: ±0.2ºC Average Heating Rate from 25ºC to 95ºC: 10 ºC/min Average Chilling Rate from 25ºC to 4ºC: 4ºC/min Operation ambient temperature: 8-30ºC Power Supply: 12V DC,5A Dimensions: 130×130×85mm Working area dimensions: 54×72 mm Net weight: 0.7kg

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

E1 class mass standards are characterized by the highest precision in terms of mass. The allowable d (more)eviation from the actual weight is minimal, making standards of this class ideal for applications where every milligram matters. Product Features: Varied Standards: The set consists of 12 wire standards and 4 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes a brush and tweezers, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant box, ensuring their safe storage and transportation. *The mg unit mass standards are wires.

IKA Rocker 2D Basic Shaker Speed Range 5 to 80 RPM Type of Movement Rocking Rocking Angle 8° Featur (more)es - Different attachments enable use for a variety ofapplications - Usable at 4 to 50 °C in incubators - Anti-slip rubber mat included - Easy operation with touch keypad - Suitable for continuous operation - Shaking diameter: 8° (angle) - Speed range: 5 - 80 rpm Rocking shaker with adjustable speed for smooth mixing tasks. Used for homogeneous mixing in flasks, culture flasks, Petri dishes, and tubes. Even with load and voltage fluctuations, shaking speed remains constant. A fixed tilt angle ensures reproducible test results. Different attachments enable use for a variety of applications, and it is usable at 4 to 50 °C in incubators. The shaker includes an anti-slip rubber mat and easy operation with a touch keypad. Suitable for continuous operation, it offers a speed range of 5 - 80 rpm with precise control in 1 RPM steps.