Memmert UF160plus Forced Circulation Oven 161L, 115V

BARNSTEAD Thermolyne 1300 Muffle Furnace FB1310M-33 Model: FB1310M-33 Capacity: 1.3 litres Working t (more)emperature limit: 1100ºC Continuous operating temperature: 982ºC Table top muffle Heating volume: 100 X 95 X 110mm External dimensions: 200 X 335 X 220 mm 1050 watts / 220V Environmental operating conditions: 17 to 27ºC, humidity less than 80% non-condensing Average cosmetic condition, numerous traces of rust

Yamato DX-402C Natural Convection Oven 74L, 115V Temperature Range Ambient +5°C to 300°C Temperatur (more)e Distribution Accuracy ± 10°C at 300°C Chamber Volume 72L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-402C Natural Convection Oven 74L, 115V is an economical, high-capacity oven designed for precision heating, featuring a spacious 74L interior. Equipped with a digital PID controller, it offers easy operation with modes like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven efficiently maintains temperatures from room temperature +5°C to 300°C with an excellent control accuracy of ±1°C and distribution accuracy of ±10°C at 300°C. It reaches its maximum temperature in about 60 minutes. Constructed for durability, it has a stainless-steel interior and an electro-galvanized steel sheet exterior with a melamine resin baking finish. Insulation is provided by glass wool, and heating is achieved with a 1.36 kW iron-chrome wire heater. It includes two exhaust ports, each 33 mm in diameter, located on top, and features microprocessor controlled PID temperature control with digital setting and display, alongside a comprehensive timer. Safety is prioritized with self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 450x410x400mm, and the external dimensions are 550x540x730mm. The oven supports a shelf plate load of 15kg, offering nine shelf rest steps with a 35mm pitch. Weighing approximately 38kg, it is compatible with AC115V 14A and is an ideal choice for users needing a larger, reliable, and easy-to-use convection oven for various applications. INCLUDED: The Yamato DX-402C Natural Convection Oven 74L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Faithful WGLL drying oven Series. Temperature range RT+5 ºC to 300 ºC. Stability ± 1 ºC. Uniformity (more) ± 2,5 ºC. Horizontal movement of air high efficiency and high uniformity thanks to air ducts double. Switch fan 3 speeds, adjustable according to needs. Temperature controller LCD with set to 0.1 ºC. Limiter temperature independent. SSR to ensure safety. System overheating protection. Digital LED display. Optional: RS485 interface, printer, remote control, SMS alarm Wireless, USB data storage. The price shown is for the model 30 L (WGLL30BE). For larger volumes, select model drop-down.

Memmert UN75PA Natural Convection Paraffin Oven 74L, 115V Setting Temperature Range +20°C to +80°C (more) Setting Temperature Accuracy 0.1 °C Chamber Volume 74 L (2.6 cu. ft.) Features - Internal volume of 74 L (2.6 cu. ft.) for versatile storage and heating applications - Temperature range from +20°C to +80°C with 0.1°C accuracy for precision heating - Equipped with dual Pt100 sensors in a 4-wire circuit for reliable temperature monitoring - TwinDISPLAY control panel with high-definition screens and PID microprocessor technology - AtmoCONTROL software for easy programming and data management via USB or Ethernet - AutoSAFETY with integrated over- and undertemperature monitoring and audible alarms - Durable stainless steel interior, reinforced with ribbing and protected large-area heating - Designed with natural convection for uniform heat distribution throughout the chamber The Memmert UN75PA Natural Convection Paraffin Oven 74L, 115V is engineered to provide precise and uniform heating, making it ideal for applications requiring controlled temperature environments. With a spacious 74-liter (2.6 cu. ft.) capacity, it offers a setting temperature range of +20°C to +80°C, maintaining accuracy within 0.1°C, thanks to its dual Pt100 sensors in a 4-wire circuit. The oven’s TwinDISPLAY control panel features high-definition TFT color displays and a digital PID microprocessor for optimal temperature consistency, while natural convection ensures uniform heat distribution without additional airflow disturbances. Enhanced safety features make this paraffin oven reliable for intensive laboratory settings. The AutoSAFETY function includes integrated over- and undertemperature monitors that follow a preset tolerance range, with audible and visual alarms to alert users of temperature deviations. With AtmoCONTROL software for easy programming and data transfer via USB or Ethernet, the oven allows customizable temperature, program time, and time zone settings. Built with a fully insulated stainless steel door, two-point locking system, and a reinforced, easy-to-clean stainless steel interior, the UN75PA is designed for durability and ease of use. INCLUDED: TheMemmert UN75PA Natural Convection Paraffin Oven 74L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA Oven 125 Basic Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 250 °C Opera (more)ting Area Inner chamber 550 x 525 x 450 mm Features - Temperature range: RT + 5°C to 250°C - Capacity: 125 l - Electronically adjustable ventilation - Clear display and control menu - Key lock function - Timer - Adjustable temperature limit Universal oven for tempering, drying, aging and heatingapplication in the laboratory. The IKA OVEN 125 basic dry covers applications in industry, schools /universities, research, quality control and science. Fast heat up times and a precise temperature control guarantee reproducibletest results. A special odorless insulation also ensures lower operating costs. The oven can be controlled by USB and test parameters can be recorded forfurther analyses. INCLUDED: The IKA Oven 125 Basic Drying Oven includes: - IKA Oven 125 basic dry - Wire grid tray, chrome plated (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Basic Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 250 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature display yesTimer yesTimer display 7 segment LEDTime setting range1 - 144000 minNumber of trays max.6Load for one tray max.30 kgOperating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight74 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20USB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1550 WPower input standby1 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

DO305 Karl Fischer drying oven is ideal for the accurate determination of the water content of solid (more) or viscous samples, such as: Substances that release the water only at a high temperature, such as plastic in powder or granular form     Substances that cause lateral reactions with the Karl Fischer reagent, such as oxidizing inorganic salts     Substances that cause problems in the titration vessel because of their consistency, such as fibrous or pasty substances     Substances that are poorly soluble or insoluble, such as wool, dough, tar and coal

Technical features Flow rate 0.5–3.0 l / min Suction (max.) 3 mWg Operating pressure (max.) 4 bar (r (more)el.) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Gilson Microman M100E Pipette, 10-100ul The ergonomically designed MICROMAN® E positive displacement (more) pipettes, along with disposable capillary piston (CP) tips, provide the highest precision when pipetting viscous, non-aqueous liquids such as oils, blood, glycerol, and more, while protecting the pipette from contamination. MICROMAN E is available in six models covering a volume range of 1 to 1000 µL. MICROMAN E relies on positive-displacement technology to improve the precision of transferring viscous and volatile liquids. The capillary piston (CP) tips eliminate the air cushion between the sample and piston so volume accuracy is not affected by the sample’s properties. Tackle these issues with MICROMAN E: - Viscous solutions—difficult to aspirate and stick to pipette tips. - Volatile solutions—leakages are created from differences between solvent vapor pressure and the air pressure within the pipette. - Cold liquids—delivered in excess amounts. - Hot liquids—under-delivered amounts. Designed with Comfort and Performance in Mind The Red Dot Award winning design of the MICROMAN E features an improved handle shape that rests comfortably in your hand, with a large push button for easy aspiration and dispensing. The volume-locking switch allows for easy volume adjustment and minimizes the risk of accidentally changing the volume during pipetting tasks. Overall Protection The positive-displacement technology of the MICROMAN E is ideal when dealing with infectious solutions and radiolabeled components. Since the disposable piston makes direct contact with the sample, the user and the pipette are protected. Within molecular biology and forensic sciences, any trace of a previous sample can lead to erroneous results and the disposable CP tips provide absolute protection against cross-contamination. INCLUDED: The Gilson Microman M100E Pipette includes: - Operator's Guide - One Year Manufacturer's Warranty

Dimensions (HxWxD): 760 x 1525 x 790 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW