Binder FD 23 Oven

Thermo Fisher Scientific Introven E-Gel Power Snap Electrophoresis System Lab This system was remove (more)d from a university lab where it was surplus to requirement. Both units are in good cosmetic condition and power up, we are unable to conduct further testing at our facility. The required power supplies are included. Included are; - Invitrogen E-Gel Power Snap Electrophoresis Device - Invitrogen E-Gel Power Snap Camera

Yamato DNF-301-115V Programmable Energy Saving Forced / Natural Convection Oven 27L, 115V Temperatur (more)e Range Ambient +15°C to 260°C Temperature Distribution Accuracy Forced Convection: ± 2.5°C (at 260°C) Natural Convection: ± 5°C (at 120°C) Chamber Volume 27L Features - Two types of circulation, forced and natural convection, in one unit (compatible with model 300/400/600) - Eco-oven with improved air velocity control system and adjustable damper - Program featured to reduce power consumption significantly - Superior heat tightness and insulation of chamber - Excellent dust tightness, dust can hardly enter the chamber - Air velocity changeable in 10 stages using digital setting of controller - Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions - Adjustable damper position at chamber front to optimize operation - Fluorescent display, interactive input method, calibration off-set function High-performance, energy-saving, programmable 27L constant temperature oven with two types of circulation (forced and natural convection) in one unit. Program featured to reduce power consumption significantly. Superior heat tightness and insulation of chamber. Excellent dust tightness, dust can hardly enter the chamber. Air velocity changeable in 10 stages using digital setting of controller. Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions. Adjustable damper position at chamber front to optimize operation. Fluorescent display, interactive input method, calibration off-set function. Operating temp ambient +15~260°C. INCLUDED: The Yamato DNF-301-115V Programmable Energy Saving Forced / Natural Convection Oven 27L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Micro-evaporator, glass oven, BUCHI B-585 Kugelrohr For drying, distillation, freeze-drying and subl (more)imation of small quantities. Ideal for fractional distillation of small quantities of solvents up to 300°C. Model: B-585 Kugelrohr Temperature: +40...+300 °C Max capacity : 10 - 60 ml Rotation speed: 0 - 50 min⁻¹ W×D×H: 650×300×300 mm Weight: 11.5 kg Included : NEW cooling unit NEW glass ventilation valve Full iris diaphragm Delivered without ball tube Year of manufacture: 2012

DO305 Karl Fischer drying oven is ideal for the accurate determination of the water content of solid (more) or viscous samples, such as: Substances that release the water only at a high temperature, such as plastic in powder or granular form     Substances that cause lateral reactions with the Karl Fischer reagent, such as oxidizing inorganic salts     Substances that cause problems in the titration vessel because of their consistency, such as fibrous or pasty substances     Substances that are poorly soluble or insoluble, such as wool, dough, tar and coal

BARNSTEAD Thermolyne 1300 Muffle Furnace FB1310M-33 Model: FB1310M-33 Capacity: 1.3 litres Working t (more)emperature limit: 1100ºC Continuous operating temperature: 982ºC Table top muffle Heating volume: 100 X 95 X 110mm External dimensions: 200 X 335 X 220 mm 1050 watts / 220V Environmental operating conditions: 17 to 27ºC, humidity less than 80% non-condensing Average cosmetic condition, numerous traces of rust

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Thermo Scientific Accela HPLC System was removed from a university lab where it was surplus to  (more)requirements. The system powers up but has not been tested further at our facility. The system is in very good cosmetic condition with only minor marks from use. Included are; 1 x Thermo Scientific Accela PDA Detector.1 x Thermo Scientific Accela Autosampler.1 x Thermo Scientific 1250 Pump.Set of Accessories

This Olympus IX50/Arcturus LCM2106 PixCell 2E Microdissection Microscope System was removed from a u (more)niversity lab where it was surplus to requirements. All parts are in good used cosmetic condition but they do have signs of general use. We have powered it all up and the system appears to function as it should. We were able to view a slide via the software on the PC. It is an excellent system and is in full working order. It has been professionally serviced. The comments from the service engineer are below. It appears to be in good working condition but we have no way of checking the laser. The internal halogen works fine and so does the external metal halide illumination. Objectives UPlanFl 4x/0.13 ∞/- UPlanFl 10x/0.30 ∞/- LCPlanFl 20x/0.4 ∞/- LCPlanFl 40x/0.60 ∞/- Diagnostic Inst 1x C Mount adaptor. Some evidence of bleaching of fluorescence filters. The system consists of: 1 x Olympus IX50 Microscope Modified by Arcturus.With PixCell IIE LCM2016 Laser System (Manufactured September 2002).The microscope is fitted with:2 x Olympus WH10X/22 Eyepieces. Olympus Objectives: 1 x OlympusLCPlanFl40x/0.60∞/ 1x OlympusLCPlanFl20x/0.40∞/ 1 x OlympusUPlanFl10x/0.30∞/ 1x OlympusUPlanFl4x/0.13∞/- 1 x ZEISSPlan-NEOFLUAR40x/0.75∞/0.17(not fitted in the microscope). 1 x Dell Dimension 3000 PC with keyboard, mouse & monitor.The PC has Arcturus ARC200 software installed and is fitted with a PCi card interface for the Hitachi camera. 1 x Olympus BH2-RFL-T3 Lamp PSU.It is showing 71.2 lamp hours. 1 x Olympus U-ULS100HG 100w lamp 1 x Hitachi KP-D590P CCD Color Camera. 1 x Camera Remote Unit. 1 x Arcturus PixCell IIe Control Unit. 1 x MARX Crypto-Box. 1 x Arcturus 12109-00D Sample holder. Various cables to connect the whole system. Manuals.

Job Lot of 380 x Erlenmeyer Kimax ISO (Wide Neck), 100 ml (10 Per Box) Lab These were removed from a (more) university lab where they were surplus to requirements. They are brand new and unused. One box was opened to take a photo. Each box contains 10 Beakers. 380 Beakers Total

Labconco Refrigerated CentriVap Benchtop Concentrator with Glass Lid Programming holds two tempe (more)ratures and times Setpoints for first and second temperatures and run times are selected separately PREHEAT/COOL button activates the refrigeration system and heater to reach setpoint temperature Set temperatures and times can be altered while a program is in process Memory stores up to nine user-defined programs Choose removable acrylic lid or solvent-resistant glass lid, each with large phenol-free lid gasket Utilize centrifugal force, vacuum and heat Brushed, stainless steel and glacier white, epoxy-coated steel exterior w/blue accents 300-watt heater increases temperature in one degree increments up to 100C Quick-Start One Button Start Up to simultaneously activate rotor, heater, timers and vacuum pump Brushless motor spins up to 1725rpm Quick-Stop system stops vacuum pump, open valve and stop rotor Automatic vacuum release valve Lid latch with safety sensors Easy-to-read LCD display Separate heat and run times, each from 1 to 999 minutes Audible alarm signals completion of set point run time Electrical receptacle enables connection of accessory vacuum pump Vacuum pump has quick disconnect fitting for connection of a vacuum gauge 12 in. dia. chamber accommodates a wide variety of rotors, including microtiter plate rotors for 96-well plates Click Here to View Product Video INCLUDED: The Labconco 7310021 Refrigerated CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

White light transilluminator used for viewing x-rays, autoradiographs and microtiter plates. Dimensi (more)ons: 400*300*90mm.