Scientific Industries Vortex Genie 2 Vortex Mixer

The MULTI-TX5 Digital is the exclusive solution for all multi-tube stirring applications, even the m (more)ost complex ones. The instrument has various foam holders for different vortex tubes; this makes it extremely useful for emulsifying, disintegrating, mixing or homogenizing samples. Major applications include suspensions, genotyping, DNA and RNA testing. Thanks to the powerful brushless motor, MULTI-TX5 Digital is able to stir solutions from 100 up to 2500 rpm, for microbiology and R&D or quality control applications in various sectors such as pharmaceuticals, cosmetics, food & beverage and chemist. Ergonomics and simplified operation Switching between applications using different foam racks is quick and easy: - Loosen both screw knobs on the closure plate and lift up the plate. - Remove the plate or simply tighten it higher. - Place the rack with the tubes inside the foam holder, lower or insert the closure plate until you reach the tubes and tighten the knobs. - Done! Safety and ease of use The MULTI-TX5 Digital guarantees a high level of safety and protection as it is made of stainless steel. The digital control panel is designed to offer a superior level of ergonomics and high ease of use and with the comfortable knobs and the double ultra-bright digital display, setting and monitoring the stirring time and stirring speed is very simple. The structure is carefully designed to ensure maximum comfort, the best resistance and minimum space on the laboratory bench. Moreover? Press the center button for 3 seconds and activate the Safety Lock of the instrument to prevent inadvertent changes. Cutting-edge functionality Unique features ensure operational automation and optimize unattended operation. Very easy to use thanks to the intelligent interface of the new control panel: - Integrated timer - 1 min to 99 h 59 min (1 min steps) - Pulse mode that allows the instrument to shake the samples at maximum speed for 2 seconds and stop for 1 second, repeating the operation - Continuous working mode with time count shown on the display - Automatic rotation inversion that ensures better mixing capacity - from 5 s to 99 min 59 s (1 s steps) - Programs in intermittent mode for better scheduling of unattended operations - from 5 s to 99 min 59 s (1 s steps)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus mini vortex stirrers OHAUS mini vortex mixers are available in four models, for reliable, gent (more)le, and high-speed mixing. Fixed speed, analog, digital and pulse models. Fixed Speed: Economical choice for vigorous, high-speed, one-touch mixing for repeatable applications. Analog control: adjust the speed as you want, you don't need precise repeatable results; speed control knob with graduation marks between 1 and 10. Digital control: adjust the speed easily and precisely, for repeatable results; control via LED display for speed and time, with buttons for adjusting the default values. Pulse vortex: pulse action that reduces heat generation, ensuring effective cell mixing and fractionation; control via LED display for speed and time, with buttons for adjusting the predefined values ​​and button for impulse control. - In tactile mode, mixing is activated by pressing the cupped head, while the continuous mode allows the use of accessories. The sturdy and stable structure ensures that the unit remains in place during use. - Rugged digital and analog vortex mixers allow for effective speed control, from low-rpm starting for gentle shaking to vigorous, high-speed vortex mixing of samples. Applications Resuspension fluids, mixing reagents, buffers and emulsions, ELISA tests, drug extractions, mixing samples Display Digital Models: Independent LED displays with speed and time information that allow the operator to view both settings simultaneously. Analog Models: Marked knobs for variable speed control. Operation Detachable three-wire cable and plug (included) Structure For all models: Accessory platform of about 7 cm with cup head for beakers, flasks, test tubes, etc ... For pulse model: holder for 12 stainless steel microtubes. Construction features Digital Models: Integrated chip control maintains set speed for constant mixing. Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

This model is particularly suitable for simple mixing tasks. In short-term operation mode, the shaki (more)ng motion is triggered by pressure on the test tube tray. This mode is suitable for mixing up solutions, for example. Persistent cell pellets can be dissolved gently but powerfully in continuous operation. With a speed of up to 2400 rpm and a shaking orbit of 5 mm, reliable and uniform distribution of solids, and homogenization of highly viscous media are guaranteed. Motion: vibrating Rotation speed range: 200 – 2400 rpm Operating Mode: automatic or continuous Orbit/Stroke: 5 mm

Print resolution: 203 dots/inch, 8 dots/mm – 300 dots/inch, 12 dots/mm or 600 dots/inch, 24 dots/mm  (more)Dot size (WxL): 203 dpi – 0.125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm, 600 dpi – 0.042 x 0.042 mm Maximum print width: 203 dpi – 104 mm Bar code modulus: 203 dpi – 4.9 mil to 49 mil, 300 dpi – 3.3 mil to 33 mil, 600 dpi – 1.6 mil to 16 mil Programmable constant print speeds: 203 dpi – 61, 76 through 254 mm/s in 25 mm increments, 300 dpi – 61, 76 through 203 mm/s in 25 mm increments, 600 dpi – 38, 51 through 102 mm/s in 25 mm increments Media label length: Minimum – 13 mm, Maximum 203/300 dpi – 991 mm, Maximum 600 dpi- 508 mm Media label width: Minimum – 25.4 mm, Maximum tear/cutter – 114 mm, Maximum peel/rewind – 108 mm Media total thickness (including liner, if any): Minimum – 0.058 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 338 x 278 x 475 mm Weight: 15 kg

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Gerhardt Soxtherm S306A SE-3A Extraction System + SE-VA Variostat This system was removed from a uni (more)versity lab where it was surplus to requirements. The unit powers on through the controller, but the controller does not seem to control the main unit. It is in fair condition,with visible signs of age. The springs are rusted, but all glass components and coils are in good condition. Due to the working and cosmetic condition, this system is listed as Spares/Repair. Specifications:- Gerhardt Variostat Controller - Model: SE-VA - S/N: 4012129 - Gerhardt Soxtherm Extractor - Model: S306A SE-3A - S/N: 4012160

Witec WCB-11 digital precision bath. Capacity 11 L. Temperature range from ambient +5°C to 100°C. Ac (more)curacy ± 0.1 °C. Digital controls. Timer up to 99 h 59 min. Pumping 5 L/min. Stainless theft. Top. Bathtub effective space: 170*240*150 mm. Exterior dimensions: 335*275*385 mm. User manual. El baño de precisión digital Witec WCB-11 is Ideal for biotechnology, clinical, environmental, medical, petroleum & food industry, pharmaceutical,  industrial applications and connection with evaporators and viscometers.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Gilson F171501 PIPETMAN DIAMOND Tips D1000ST, 100-1000uL The Gilson F171501 PIPETMAN DIAMOND Tips D1 (more)000ST, 100-1000uL are designed to fit your PIPETMAN perfectly. They deliver accurate and precise pipetting when used in conjunction with Gilson pipettes. One commercial unit/quantity of the autoclavable TIPACK includes 10 racks of 96 tips (total of 960 already racked tips). These tips are fully autoclavable and color-coded for easy identification while being compliant with Good Laboratory Practice (GLP). Using PIPETMAN DIAMOND Tips with your PIPETMAN ensures maximum accuracy and precision and delivers consistent results. The perfect air-tight seal prevents leaks. The tips are made of pure polypropylene to deliver the correct volume and ensure complete dispensing. Volume graduations make it easy to visually check the volume aspirated. Gilson tips are manufactured in a clean room environment ensuring they are free of detectable contaminants that can affect your results. From mold to bench, our tips are guaranteed, certified, and traceable to meet the most stringent demands in many applications. Uniquely designed TIPACKS feature a dual-purpose lid: hinged to easily open and close while using tips; or simply pull it out of the hinges to set on top or discard for high-throughput tip usage. TIPACKS are compact, ergonomic, and eco-friendly. INCLUDED: The Gilson F171501 PIPETMAN DIAMOND Tips D1000ST, 100-1000uL includes: - 10 Racks of 96 Non-Filtered Tips - 3 Year Manufacturer's Warranty