IKA MS2 Vortex Mixer

Sample preparation stirrer Modernize your laboratory with Guardian 5000 Series shakers, designed to  (more)be safe and deliver exceptional safety and superior performance. Numerous cutting-edge Ohaus features: - SafetyHeat system to protect the laboratory: an industry-leading sensing system uses two independent safety controls to continuously monitor the electronics and shut off the heat before it overheats - Powerful and consistent shaking performance: precise stirring from 60 to 1600 rpm is made possible by the design of a powerful, robust motor with magnet and software controlled ramp rate, ensuring safe stirring even for viscous applications. - Easy to read LCD display with everything you need to know: the bright LCD display includes temperature and speed settings, intuitive icons and hot top indicator - Durable and reliable with SmartHousing: smartHousing is resistant to chemicals with an innovative and easy to clean design; the lines allow any liquid spills to drain out of the instrument Available models: Model e-G51HP07C: plate 178x178mm; flow rate 15 litres; ceramic plate; heating up to 500°C. Model e-G51HS07C: plate 178 x 178mm; flow rate 15 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HS10C: plate 254x254mm; flow rate 18 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HSRDM: plate Ø135mm; flow rate 18 litres; aluminum plate; heating up to 380°C and stirring up to 1600rpm. Model e-G51ST07C: plate 178x178mm; flow rate 15 litres; ceramic plate; stirring up to 1600rpm. Applications Boiling water, water/oil bath preparation, sample and solution preparation, dissolution buffers and reagents, sample concentration Display Backlit LCD display for temperature and speed, green lights when unit is heating and agitating, prominent hot light, probe in use icon, single point calibration icon Operation Stirring from 60 to 1600 rpm, ambient temperature range from +5°C to 500°C (ceramic top) or 380°C (aluminum top), power cord (included), the stirring models include a 1.5” (3.8cm) PTFE coated stir bar Construction Probe connection, SmartHousing™ stays cool to the touch and is resistant to chemicals, IP21 rated, polycarbonate front panel, control knobs, On/Off switch to disconnect heater, integrated pole holder, easy-to-use ceramic or aluminum tops to clean Characteristics Hot top light, audible alarm, SafetyHeat™ protection shuts down heater in case of malfunction, temperature calibration function for 3 probes and 3 platen setpoints

Speed: 600-3200 rpm Dimensions (HxWxD): 165 x 122 x 165 mm Weight: 4 kg

Interscience BagMixer 400 CC Homogenizer. Efficient and versatile equipment, designed for sample pro (more)cessing in microbiology and food analysis laboratories. This homogenizer offers a capacity of 50 to 400 mL and uses an adjustable paddle system to ensure complete and uniform homogenization of the samples. Four adjustable mixing speeds between 4 and 10 strokes per second. The 400 CC model includes an automatic door opening function and an adjustable timer from 1 second to 1 hour. LCD display. Its robust stainless steel construction makes cleaning easy and ensures long durability. In addition, it has a safety system that automatically stops operation in case of accidental opening. Noise level < 48 dB. Dimensions: 270*421* 266 m; 16 kg. User manual. Optimize your microbiological analyses with the Interscience BagMixer 400 CC Food Homogenizer, available at Galileo Equipment. Ideal for applications in food, pharmaceutical and environmental sample preparation, this equipment guarantees efficient homogenization without cross-contamination. Its robust design and advanced technology allow for fast and uniform processing. With adjustable capacity and easy cleaning, the BagMixer 400 CC is essential for laboratories seeking precision and reliability. Buy now and take advantage of our exclusive offers to equip your laboratory with cutting-edge technology!

Ohaus VXMPDG Digital Microplate Vortex Mixer, 120V Orbit 0.1 in (3.5 mm) Speed Range (On Mode) 300  (more)to 2,500 rpm Control Digital Features - Digital control system with exact speed adjustments from 300 to 2500 rpm in On Mode and up to 3500 rpm in Touch Mode - Designed for continuous-duty operation, ideal for ELISA assays, PCR preparations, and other lab applications - Independent LED displays for simultaneous speed and time monitoring - Compact 0.1-inch orbit ensures efficient mixing of microplates - Robust Cycoloy construction provides durability and stability during high-speed mixing - Includes a single microplate adapter and cup head for versatile application - Weighs 11.7 lbs. and is TUV certified for safe operation in lab environments The Ohaus VXMPDG Digital Microplate Vortex Mixer, 120V, is engineered for precise and reliable mixing of microplates across a wide speed range. Ideal for continuous-duty lab applications, this digital model offers exact speed control from 300 rpm to 2500 rpm in On Mode, and up to 3500 rpm in Touch Mode, ensuring repeatable results for ELISA assays, PCR preparations, and other critical tasks. The compact design, featuring a 0.1-inch orbit, is perfect for efficiently mixing microplates, while the independent LED displays allow for simultaneous monitoring of speed and time settings. Constructed with durable Cycoloy and equipped with a microplate adapter and cup head, this mixer guarantees stability and safe operation even at high speeds. Weighing 11.7 lbs., it is TUV certified and operates within a working environment of 39°F to 104°F (4°C to 40°C) with 20% to 85% non-condensing humidity. The mixer’s dimensions are 10.5 in x 4.5 in x 5.4 in, and it consumes 30W of power. INCLUDED: The Ohaus VXMPDG Digital Microplate Vortex Mixer, 120V includes: - Microplate Adapter - Power Cord - Two Year Manufacturer's Warranty

Eppendorf Thermomixer C Model 5382 w/ 1.5ml Block &amp; ThermoTop The Eppendorf Thermomixer C Model  (more)5382 w/ 1.5ml Block &amp; ThermoTop is a state-of-the-art thermal mixer designed for precise and efficient sample mixing and temperature control. This device offers a speed range from 300 to 2,000 RPM with increments of ± 50 RPM, allowing for versatile mixing capabilities. It operates within a temperature range from Ambient -15°C to 100°C, ensuring accurate temperature control with a uniformity and accuracy of ± 0.5°C between 20°C and 45°C, and ± 1°C outside this range. Its temperature increments are adjustable by ± 1.0°C. The Thermomixer C features an impressive heating rate of 6°C per minute and a cooling rate of 2.5°C per minute from Ambient to 100°C, slowing to 0.5°C to 0.8°C per minute outside this range. The device employs a unique 2DMix–Control technology, delivering controlled, circular mixing movements with an orbital diameter of 3 mm, guaranteeing excellent mixing performance, even for challenging samples. The Eppendorf QuickRelease allows for fast and easy block exchanges, while the optimized block design ensures maximum temperature transfer. Each SmartBlock is sensor-controlled for precise calibration. Additionally, the Eppendorf ThermoTop reduces condensation in tube lids, maintaining consistent sample concentrations and providing optimal reaction conditions. Its wireless connection with automatic recognition enhances user-friendly operation, making the Eppendorf Thermomixer C an essential tool for reliable and efficient sample processing in any laboratory setting. INCLUDED: The Eppendorf Thermomixer C Model 5382 w/ 1.5ml Block &amp; ThermoTop includes: - 1.5ml Block - ThermoTop - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf Thermomixer C Model 5382 w/ 1.5ml Block &amp; ThermoTop SpecificationsSpeed Range300 to 2,000 RPMSpeed Increments± 50 RPMTemperature RangeAmbient -15°C to 100°CTemperature Uniformity± 0.5°C at from 20°C to 45°CTemperature Accuracy± 0.5°C from 20°C to 45°C, ± 1°C outside previous rangeTemperature Increments± 1.0°CHeating/Cooling RateHeating: 6°C/minuteCooling: 2.5°C/minute from Ambient to 100°C, 0.5°C/min to 0.8°C/min outside previous rangeOrbit3 mmTimer5 seconds to 99 hours and 30 seconds, or continuousInterfacesUSBDimensions (W x D x H)8.1 x 12 x 5.4 in. (20.6 x 30.4 x 13.6 cm)Weight13.9 lb. (6.3 kg)Electrical Requirements100-130V, 50/60HzDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

Benchmark BenchMixer XLQ QuEChERS Shaker/VortexerBenchmark’s BenchMixer XLQ has been designed for us (more)e in QuEChERS and other sample prep methods. Supplied with racks for 50ml tubes held horizontally and 15ml and 1.5/2.0ml tubes held vertically, it takes the place of traditional manual shaking in these applications. Multiple samples can be processed simultaneously in the Benchmixer XLQ’s large capacity racks, saving time and preventing operator fatigue. The vigorous, consistent shaking ensures all samples are exposed to identical conditions within the same batch of samples, as well as between batches. The BenchMixer XLQ creates a true vortex in vertical sample racks by holding the top of the tube stationary while the bottom rotates in a 3.6mm orbit. Time and speed are precisley controlled by the digital microprocessor. A pulse mode allows for more vigorous mixing. Quiet operation, minimal vibration and a long service life are guaranteed by the precisely balanced drive system and powerful motor. Using the BenchMixer XLQ is simple. To load the sample racks, loosen the knobs on the stationary steel rods and raise the top sample plate. One rod is shorter than the other, allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lower the plate into place and tighten the knobs. Select the desired speed and run time on the digital control panel and press start. The BenchMixer XLQ can perform unattended mixing for as little as 1 minute or up to 100 hours. INCLUDED: The Benchmark BenchMixer XLQ QuEChERS Shaker/Vortexer includes: - 7 x 50ml Hortizontal Tube Rack - 50x15ml and 50x1.5/2.0ml Tube Rack - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Waters 2695 Separations Module is an integrated solvent and sample management platform. This int (more)egration of two traditional high performance liquid chromatography (HPLC) components streamlines all critical separation functions.

This Thermo Shandon Pathcentre PCB Enclosure was removed from a university lab where it was surplus  (more)to requirements. The unit is in reasonably good cosmetic condition. It powers up but due to the alarm sounding with Code: Error23 present we are unable to test it further at our facility, and it is sold as Spares or Repairs. Error 23 is a power supply issue. System includes the following: 1x PathcentreC/N: 75210007 issue 36S/N: PC1572E0202 1x PCB EnclosureC/N: 75210044 issue 10 1x CommandC/N: 75210012S/N: 1550

Edinburgh Instruments Time-Correlated Single Photon Counting System This system was removed from a u (more)niversity lab where it was surplus to requirements. Although all units successfully powered on, we cannot test it completely at our facility. Condition varies as stated below each item. The system includes the following components: Edinburgh Instruments Spectrometer SystemSerial#: 178 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the control box, PMT Cooler Controller &amp; PC with Software. The following tests were conducted: 1. Excitation Mono Successfully Initialised2. Emission1 Mono Successfully Initialised3. Excitation Polariser Successfully Initialised4. Emission1 Polariser Successfully Initialised5. Sample Holder Temperature Successfully Read6. nF Iris did not initialise (nF Iris Cable present but unable to find port)7. TAC Range &amp; Scaler Successfully Initialised All tests were performed using CD900 Test software. However, unable to open EAI Level 2 Edinburgh Instruments CD900 Software due to requiring Software Protection Device. Additionally, the system includes: Edinburgh Instruments Nanosecond Flashlamp HeadModel: nF900Serial#: 095Mfd: 03/2000 The item is in good cosmetic condition and pairs successfully with the Spectrometer System. Edinburgh Instruments nF900 ControllerModel: nF900Serial#: 092Mfd: 03/2000 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller &amp; PC with Software. All cables shown at the rear are included. Edinburgh Instruments CD900 ControllerModel: CD900Serial#: 112Mfd: 03/2000 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller &amp; PC with Software. All cables shown at the rear are included. Lastly, the system includes an Elonex ProSentia PC, iiyama ProLite B2290HS Monitor, Elonex Keyboard &amp; Microsoft. All items are in good cosmetic condition and in full working order. The PC runs Windows 98 and the software installed includes EAI Level 2 (requires Software Protection Device), F900 test, and Cd900t (requires Software Protection Device).

The series of standard electromagnetic modules of high resolution, MAS.1, is intended for integratio (more)n into customer&rsquo;s weighing systems. The high resolution MAS.1 module operates on the basis of electromagnetic force converter. Thanks to its compact design and integrated electronics the module can be both adapted into technological lines and installed inside customers&#39; devices. By cause of high measurement accuracy, it is recommended to install the module inside customer&#39;s instrument (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MAS.1 module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 mg, Overload protection, Ease of adaptation to the required storage space,, Internal adjustment, Various options of hardware configuration.