IKA MS2 Vortex Mixer

The system includes: pt100 probe (code A00000268), magnetic stir bar Ø8x40 mm (code A00000356). AREC (more) 7 CONNECT MAGNETIC STIRRER AREC 7 Connect features state-of-the-art heating plate technology, designed by VELP, which ensures temperature homogeneity, thermal efficiency and long-lasting heating performance. AREC 7 Connect can be connected to the external Pt100 probe for precise thermoregulation of the fluid, being ideal for temperature-sensitive applications in Chemistry, Biotechnology and Pharmaceuticals. The probe guarantees stable and precise thermoregulation up to 300°C, with an accuracy of ± 0.5°C. Powerful stirring for all your lab applications Thanks to the powerful magnetic coupling, you will have the possibility to stir up to 20 liters (H2O), from 30 up to 1700 rpm (aqueous solutions), ideal characteristics for any type of application, chemical, pharmaceutical and microbiological. In addition, the SpeedServo ™ technology, designed by VELP, will keep the speed constant as the viscosity changes. Absolute safety and ease of use for laboratory operators The AREC 7 Connect hotplate stirrer guarantees a higher level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. Save time with the new control panel Thanks to the double digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature and the stirring speed. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1700 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood. Programmable operation for excellent laboratory efficiency AREC 7 Connect is equipped with some exclusive and extremely advanced features that optimize unattended operation, easily usable, thanks to the intuitive display: - Integrated timer to suit your lab workflow - 1 min to 99 h 59 min (1 min steps) - Autorverse of the stirring direction which guarantees advanced mixing capabilities - from 5 s to 99 min and 59 s (1 s steps) - Programs in intermittent mode for better scheduling of unattended operations - from 5 s to 99 min 59 s (1 s steps) - Acoustic signals for timers and alarms - Safety lock function to avoid possible alterations of the working conditions 1 - Ceramic heating plate 2 - Main switch 3 - Speed control knob 4 - Temperature control knob 5 - Display A - Probe led B - Wi-Fi led C - Temperature setpoint led D - Timer led E - Autoreverse led G - Menu and lock button F - Intermittent mode led Note: it’s important to choose the most suitable magnetic stirring bar related to the type and the quantity of the liquid to be stirred as well as to the type of the beaker. Size and shape of the magnetic stir bar determines the stirring efficiency at any given speed. After purchase you will receive: ➢ AREC Connect, Heating Magnetic Stirrer ➢ Instruction manual ➢ Magnetic stir bar ➢ Power supply cable VELP ERMES: FROM USER WORK MANAGEMENT TO DATA-RICH PROCESSES AREC 7 Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC 7 Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC 7 will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP service centres.VELP ERMES: FROM USER WORK MANAGEMENT TO PROCESS DATA-RICH AREC 7 Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC 7 Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC 7 will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP assistance centres.

Seaward Stomacher Model: 80 Biomaster Lab This item was removed from a university where it was surpl (more)us to requirement. It is in very good cosmetic condition and powered up, we are unable to test it further at our facility. This item is supplied with the following: 2 x IEC Leads1 x Seaward USB Stick, containing Warranty Information & Instruction Manual1 x Seaward BA6040 Standard Bags x 50

IKA LAB DANCER vortex mixer 4.5mm vibration orbit Fixed speed range (min-1): 2800 Ø x H: 100 x 70mm  (more)Weight (kg): 0.55 Broken rubber and plastic

Benchmark BioMixer 3D Nutating Shaker The Benchmark BioMixer 3D multi-functional shakers provide a 3 (more)-dimensional “nutating” motion for thorough, foam-free mixing in blood and centrifuge tubes, as well as in a variety of flat vessels. The BioMixer comes standard with an autoclavable dimpled mat while optional flat mats are also available for mixing other vessel types. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. Even the smallest single platform configuration has 24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2kg and are safe for use in cold rooms and incubators. INCLUDED: The Benchmark BioMixer 3D Nutating Shaker includes: - 12 x 12 inch Dimpled Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Speed: 200 – 2400 rpm Dimensions (WxHxD): 120 x 150 x 120 mm

Compact, universal small shaker suitable for shaking tasks with all small vessels. Two operating mod (more)es: Mode A (safe mode with attachment detection) the maximum speed of 3.000 rpm is only reached with the standard attachment in touch mode. When using other attachments the speed is limited to 1.300 rpm. Mode B (without attachment detection) a speed of 3.000 rpm is possible with all attachments. Orbital shaking movement amplitude 4.5 mm Speed 0 – 3000 rpm Dimensions (lxwxh) 148 x 205 x 63 mm Weight 2.9 kg Excluding shaking attachment

It has a touchscreen control, pressure sensors and a two-stage controlled valve. Optimizes lab bench (more) space by allowing hands-free operation of the central vacuum unit. Features Simple and versatile vacuum control with digital display Simple and intuitive operation Compatible with virtually all diaphragm vacuum pumps Four different modes of operation Allows variable speed control and automatic pressure detection when combined with KNF N 920 G, N 820 G and N 840 G vacuum pumps USB interface for PC control Applications Rotary evaporation Distillation Multi-user suction system Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Fusion UV DRSE 120 UV Coating System Lab This system was removed from a university where it was surp (more)lus to requirement. All units are in good cosmetic condition and powered on, however the Conveyor belt motor runs independently but not when connected to the main unit. The UV lights are not working and the power supply is showing error codes related to interlock and RF detector issues. Due to the faults stated above, this system is listed as Spares/Repair. This system comprises the following: - Fusion UV DRSE 120 UV Coating System - Fusion Systems Power Supply P150 - Fusion Systems Model I250B - Fusion Systems Blower K523/2 - 2 x Fusion UV Magnetron 554172 (New in Original Packaging) - Fusion UV Variable Power Supply

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Ohaus ISWV02HDG Waving Incubating Shaker The Ohaus ISWV02HDG Incubating Waving Shaker combines the u (more)nique vertical and horizontal "wave" motion with general purpose incubation in one compact bench top unit. The ISWV02HDG is designed to incubate samples from 5° above ambient to 65° C to provide accurate and repeatable results. Waving shakers offer a smooth, low-foaming three-dimensional "wave" motion. The ISWV02HDG features LED displays with touchpad controls. Both models include safety features that protect both the user and samples. Equipped with LED displays and touchpad controls for temperature, speed/tilt angle and time. Timer will display elapsed time or when programmed to a set time, will turn off when time reaches zero. Microprocessor control provides electronic tilt angle adjustment, allowing easy adjustment in 1° increments for tilt and 1 rpm for speed while unit is running. PID controller for precise temp. control. Units slowly increase speed to desired setpoint to avoid splashing, and feature overload protection. Audible and visual signals will activate when system detects an obstruction or overload of the tray.INCLUDED: The Ohaus ISWV02HDG Waving Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISWV02HDG Waving Incubating Shaker SpecificationsTemperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range1 to 30 rpmSpeed Accuracy± 1 rpmTilt Angle0 to 20°Timer1 second to 160 hoursMaximum Weight Capacity5 lbs (2.3 kg)Tray MaterialAluminumTray Dimensions (L x W)9.25 x 7.25" (23.5 x 18.4 cm)Interior Dimensions (L x W x H)10.75 x 7.75 x 3.4" (27.3 x 19.7 x 8.6 cm)Overall Dimensions (L x W x H)17 x 11 x 10.5" (43.2 x 27.9 x 26.7 cm)Ship Weight22 lbs (10 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(7) { background-color: #fffacd; }

Heidolph Hei-VAP Expert Control ML/G3B Coated Motor Lift w/ G3 Vertical GlasswareThe Hei-VAP Series  (more)of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Hei-VAP Expert Control and Ultimate Control allow to centrally control all process parameters: vacuum, cooling temperature, rotation and heating bath temperature. Promising intuitive operation as all settings are configured centrally on the operating panel. In combination with the Control-Box, the panel can even be used as the central control unit to regulate the vacuum and the Hei-CHILL recirculation chiller as well. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 5" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) - Control of any vacuum sources and Heidolph recirculation chillers - Solvent library - Favorites memory - Dynamic AUTOaccurate (DAA) - Ramp programming Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert Control ML/G3B Coated Motor Lift w/ G3 Vertical Glassware includes: - Heating Bath - G3B Vertical Glassware - Control Panel - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Vacuum Valve - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Gilson PIPETMAN G Multichannel P12x300G, 30-300 uL Pipette Designed PIPETMAN G brings a new level of (more) comfort into the Gilson range, with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. Pipetting ComfortPIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting.Reliable ResultsPIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Built-to-Last and ConvenientMade of PVDF and stainless steel, the PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Multichannel P12x300G, 30-300 uL Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty