CS Cleaver Scientific S0100A-CLE-230V Vortex Mixer

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Fisher Scientific Model 232 Vortex Mixer

Speed: 600-3200 rpm Dimensions (HxWxD): 165 x 122 x 165 mm Weight: 4 kg

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-27316 ICI Heating Bath [condition: Used]ITEM-27321 Fisherbrand Whirlimixer [condition: Used]ITEM-27320 Fisons Whirlimixer [condition: Used]ITEM-27323 Stuart Magnetic Stirrer SM1 [condition: Used]ITEM-27307 Vortex genie 2 [condition: Used]ITEM-27318 Electrothermal Heating Mantle [condition: Used]ITEM-27313 Zeneca Heating Bath [condition: Used]ITEM-27649 ActIn Time AT-80DA [condition: Used]ITEM-27658 Stuart Scientific Vortex Mixer SA3 [condition: Used]ITEM-27308 Speedsafe Yellow Stirrer [condition: Used]ITEM-27651 Grant Stirred Water Bath [condition: Used]ITEM-27648 Pharmacia LKB.EPS 500/400 [condition: Used]ITEM-27644 Denley Well Mixx3 [condition: Used]ITEM-27643 Eppendorf Centrifuge 5315 D [condition: Used]ITEM-27639 Vortex Genie 2 [condition: Used]ITEM-27631 Supply Unit 20W [condition: Used]ITEM-27629 Pharmacia Biotech Electrophoresis Power Supply [condition: Used]ITEM-27633 Stuart Vortex Mixer SA8 [condition: Used]ITEM-27650 Stuart Scientific Autovortex SA6 [condition: Used]ITEM-27642 Techne TC-312 [condition: Used]ITEM-27640 Gallenkamp Magnetic Stirrer [condition: Used]ITEM-27626 Grant Boekel FSR20 [condition: Used]ITEM-27627 Kikusui DC Power Supply [condition: Used]ITEM-27620 Kikusui DC Power Supply [condition: Used]ITEM-27618 LAMB Hotplate [condition: Used]ITEM-27853 Optical Reciever [condition: Used]ITEM-27852 Polarisation Controller [condition: Used]ITEM-27847 Corning Phase Modulator & Driver [condition: Used]ITEM-27844 Bicc Communications 16x16 AWG [condition: Used]ITEM-27843 PriTel Ultrafast Optical Clock [condition: Used]ITEM-27841 FlexLight Optimate 1000NT [condition: Used]ITEM-27840 Porta Systems 1x4 Singlemode [condition: Used]ITEM-27319 Electrothermal Controller [condition: Used]ITEM-27813 Koheras Adjustik [condition: Used]ITEM-27536 Titertek Unit [condition: Used]ITEM-27531 Rocky Biometra Shaker [condition: Used]ITEM-27530 Grant Water Bath [condition: Used]ITEM-27526 Stuart Orbital Shaker [condition: Used]ITEM-16236 SeeScan Imaging Model i3000 With Mouse Lab [condition: Used]ITEM-27507 Scigene Hybex Microsample Incubator [condition: Used]ITEM-27513 AND EK-600H Scales [condition: Used]ITEM-27523 Staurt Battery Stirrer [condition: Used]ITEM-27518 Sartorius Scales [condition: Used]ITEM-27520 Fisons Whirlimixer [condition: Used]ITEM-27528 Gallenkamp Magnetic Stirrer [condition: Used]ITEM-27525 Gallenkamp Magnetic Stirrer [condition: Used]ITEM-27521 Hanna Magnetic Stirrer [condition: Used]ITEM-28247 Tectronix Instrument [condition: Used]ITEM-28249 Hook & Tucker Rotamixer [condition: Used]ITEM-28248 Chiltern Vortex Mixer [condition: Used]ITEM-28250 Farenell 60 MHz Oscilloscope DTV 60 [condition: Used]ITEM-28357 Hanna Magnetic Stirrer [condition: Used]ITEM-28366 Consort E312 [condition: Used]ITEM-28354 Exogen Fracture Healing System 2A [condition: Used]ITEM-28355 Exogen Six Channel Research Device [condition: Used]

Boekel Scientific 302000 Touch Screen Blood Collection MixerBoekel Scientific’s new Touch Screen Blo (more)od Collection Mixer was designed in conjunction with stationary and mobile blood collection experts. The unit incorporates the functionality needed for the busiest donor stations with new-to-the-industry features to improve efficiency and operation ease. The unit has an easily viewable, bright color touch screen that displays the collection data in real time. The most important collection details such as current volume, target volume, percent full, elapsed collection time and estimated time remaining are displayed during operation. The unit also has a large active pictorial that visually represents the blood collection bag, so phlebotomist can observe the progress from a distance while tending to other donors. The blood collection mixer also has a highly accurate scale, removable long-life battery pack, USB and Ethernet data ports. Features - Displays Current Volume, Percentage Full, Elapsed Time, and Estimated Time Remaining - Vivid Color Touch Screen That Can Easily Be Viewed From Across The Room - Integrated Lifting Handle and Magnetically Attached Mixing Tray - Long-Life Interchangeable Battery - USB and Ethernet Data Ports Click Here to View Product Video INCLUDED: The Boekel Scientific 302000 Touch Screen Blood Collection Mixer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BenchMixer XLQ QuEChERS Shaker/VortexerBenchmark’s BenchMixer XLQ has been designed for us (more)e in QuEChERS and other sample prep methods. Supplied with racks for 50ml tubes held horizontally and 15ml and 1.5/2.0ml tubes held vertically, it takes the place of traditional manual shaking in these applications. Multiple samples can be processed simultaneously in the Benchmixer XLQ’s large capacity racks, saving time and preventing operator fatigue. The vigorous, consistent shaking ensures all samples are exposed to identical conditions within the same batch of samples, as well as between batches. The BenchMixer XLQ creates a true vortex in vertical sample racks by holding the top of the tube stationary while the bottom rotates in a 3.6mm orbit. Time and speed are precisley controlled by the digital microprocessor. A pulse mode allows for more vigorous mixing. Quiet operation, minimal vibration and a long service life are guaranteed by the precisely balanced drive system and powerful motor. Using the BenchMixer XLQ is simple. To load the sample racks, loosen the knobs on the stationary steel rods and raise the top sample plate. One rod is shorter than the other, allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lower the plate into place and tighten the knobs. Select the desired speed and run time on the digital control panel and press start. The BenchMixer XLQ can perform unattended mixing for as little as 1 minute or up to 100 hours. INCLUDED: The Benchmark BenchMixer XLQ QuEChERS Shaker/Vortexer includes: - 7 x 50ml Hortizontal Tube Rack - 50x15ml and 50x1.5/2.0ml Tube Rack - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Analog heat lamp with rings set for adjustable internal diameter. Diameter: 40 – 160 mm Dimensions ( (more)H x Diameter): 275 x 210 mm

Sanyo MIR-153 Cooling Laboratory Incubator Lab This item was removed from a university lab where it  (more)was surplus to requirements. It is in reasonably poor cosmetic condition with noticeable damage. Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

This Thermo Heraeus Pico 17 Centrifuge was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and is in good working order up to the max of 13000rpm. It is in good cosmetic condition with minor marks from use. Thermo Heraus Pico 17 CentrifugeModel#: Pico 17Serial#: 40638289Manf: 2006 Thermo 75003424 Fixed Angle RotorModel#: 75003424Holds 24 x 1.5/2ml Tubes.Max 14800rpmIt also comes with the original Allen key used to tighten the Rotor.

Memmert IF750 Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 749 L (26.5 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF750 Forced Circulation Incubator 749L, 115V offers an expansive 749 L (26.5 cu.ft.) volume, making it an excellent choice for large-scale laboratory operations. Its setting temperature range spans from +20°C to +80°C, with a working range starting at Min. 10°C above ambient. The incubator features a robust ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display, allowing for precise control over key parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time. Its easy-to-clean stainless steel interior is reinforced with deep drawn ribbing and integrated heating on four sides, ensuring durability and optimal heat distribution. Designed for safety and efficiency, the IF750 includes an adjustable overtemperature monitor and mechanical temperature limiter TB, in compliance with DIN 12880 standards. The forced air circulation system, driven by a quiet air turbine, is adjustable in 10% increments, ensuring even airflow and precise temperature control. With space for up to 14 shelves and a maximum chamber load of 661 lbs, this incubator is suitable for high-capacity workloads. Additional features like AtmoCONTROL software, a fully insulated stainless steel door with inner glass, and autodiagnostic systems make the IF750 a powerful tool for any lab environment. INCLUDED: The Memmert IF750 Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

F2 Mass Standard - knob weights, service case. Nominal value - 500 kg.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.