Millipore SmartPak DQ3 Purification Pack

Elix Advantage systems have been designed to deliver the highest pure water quality for your regular (more) laboratory applications and instrument feed. The systems also complies with the purified water requirements from the US, Japanese and European Pharma providing consistent, reliable pure water. Combining the patented Elix electrodeionization technology with the most advanced purification technologies, the Elix Advantage system uses potable tap water as feed to produce consistent, high quality pure water for all your lab’s needs—saving you time and money. The system provides pressurized, bacteria-free pure water through the E-POD (Elix Point-of-Delivery) units. Water quality: Type 2 Feed water nature: Potable tap water Flow rate: 5 L/h Daily product water usage: 100 L/day Product water particulates: < 1 unit/mL (particulates >0.22 μm – with Millipak or Biopak point-of-use filters) Product water DNase: < 5 pg/mL (with Biopak Polisher) Product water microorganisms: < 0.1 CFU/mL (with Millipak or Biopak point-of-use filters) Product water pyrogens: < 0.001 EU/mL (with Biopak Polisher) Product water RNase: < 1 pg/mL (with Biopak Polisher) Distribution flow rate: Up to 2 L/min from POD Product water resistivity at 25°C: > 5 MΩ·cm (Typically 10 – 15 MΩ·cm) Product water TOC: < 30 ppb Dimensions (HxWxD): 500 x 332 x 484 mm Operating weight: 17.2 kg Including: Millipore 60 Liter PE water storage tank Excluding: New filters

Elix systems have been designed to deliver the highest pure water quality for your regular laborator (more)y applications and instrument feed. Elix is suited to every user’s needs in today’s demanding laboratory environment. Elix water quality is ideal for the preparation of reagents and buffers, for microbiology media, hydroponics or histology. It is also the best feed for all Milli-Q and Super-Q ultrapure water systems, as well as instruments such as glassware washers, autoclaves and hydrogen generators. Superior and consistent Type 2 water quality – “Superior”, as resin beads are not degraded by exposure to harsh regeneration chemicals. “Consistent”, as the continuous regeneration avoids the drawbacks of quality variations from resin exhaustion. Cost & labor savings – Elix module contains special carbon beads at its cathode therefore, does not require water softening. Its self-regeneration technology avoids the hassle and costs around DI cartridge replacement. Elix is “green” consuming low energy with a small carbon footprint. Long lasting technology – thanks to its proven design, the module continuously regenerates its resin beads without the need for any maintenance. Elix pure water is irradiated by a bactericidal UV lamp before entering the storage tank. The reservoir design maintains consistent purity of stored water. The vent filter provides effective protection against airborne contaminants and the ASM, Automatic Sanitization Module, prevents biofilm formation. Elix water can then be sent by a distribution pump to feed instruments or a distribution loop. They can be integrated into a centralized system, providing total control of all parameters within the system itself as well as within the external pure water distribution loop. Water Specifications: Resistivity at 25 °C: > 5 MΩ•cm TOC: < 30 ppb Bacteria: < 10 CFU/mL Silicate removal: > 99.9 % Production flow Rate: 20 L/h Feed water: Water quality: Potable tap water Feed water conductivity at 25 °C: < 2000 µS/cm Feed water pressure: 2 – 6 bar Feed water temperature: 5 – 35°C Feed water chlorine: Application Specialist will determine pretreatment required Feed water fouling index: Application Specialist will determine pretreatment required Feed water pH: 4 – 10 pH units Feed water connection: ½ in Gaz M System Specifications: Dimensions (H x W x D): 734 x 662 x 441 mm Operating weight: 45 – 62 kg Data port connection: RS232 Including 200 L storage tank Excluding new filters

The Synergy Water Purification System is fed with pretreated water (Elix, RO, distilled or DI water) (more) coming from a tank or a loop. When Product Water is being dispensed, the Inlet Solenoid Valve opens and the Booster Pump turns on. The pretreated water is then pumped into the UV Lamp (UV System). The UV Lamp emits light at 185 nm and 254 nm. It is used to reduce levels of organic molecules in the water. The UV Lamp is a consumable device that needs to be periodically replaced during the maintenance of the system. The water is then sent to the SynergyPak cartridge to deionize the water. There are three types of SynergyPak. SynergyPak 1 is used for RO, distilled or Elix feedwater. SynergyPak 2 is used for pretreated water from clean DI (particulate-free). SynergyPak 3 is used for pretreated water from dirty DI (non particulate-free). The SynergyPak is a consumable device that needs to be periodically replaced during the maintenance of the system. The Final Filter is a membrane based filter that  removes all particles and bacteria with a size greater than the filter pore size. The Final Filter is a consumable device.

Useable in Eppendorf 5430/5430R centrifuges Capacity: 2x MTP, PCR or Deep well Plates Max g-force: 2 (more)024 x g Max speed: 4680 rpm