Under-bench cabinet depth 51cm - Length 130cm

USBECK Aluminum Spindle Lift 20 x 20 cm Lifting Stand, Laboratory Lifting Table Tabletop dimensions: (more) 200 x 200 mm With traces of wear

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Scope: Flexibility: Efficiency

Accuris AP1096-ELP 96 Well Elution Plates For Isopure, Cs 100 Well elution plates for IsoPure 96. I (more)NCLUDED: The Accuris AP1096-ELP 96 Well Elution Plates For Isopure, Cs 100 includes: - Accuris AP1096-ELP 96 Well Elution Plates - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The suspended self-centring weighing pan is designed specifically for the WAY 5Y.KO manual mass comp (more)arators. Installed It is installed during the device’s production stage in place of the standard weighing pan, so it should be ordered when ordering a comparator (it is not sold as a separate product). The weighing pan has the following functions: placing several weights, which are the resultant of the reference standard, off-centre, positioning the centre of gravity of the test and reference standards always in the same place.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

RET control-visc white Speed Range 50 to 1,700 rpm Temperature setting range 0 - 340 °C Setting accu (more)racy speed 10 rpm Features - BNC socket for connection of a pH electrode - Adjustable temperature control mode: rapid heating and very accurate temperature control - Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature - Timer and countdown functions - Display of viscosity change trend - Detached magnet detection - Intermittent operation - Several modes of operation available - Safety circuit adjustable from 50 to 380° - Transparent protective cover included - Error code display for easy troubleshooting - Exact temperature and speed adjustment by means of digital display; even when function switched off - Suitable for unsupervised operation - Sealed casing (IP 42) ensures a long service life - Automatic switch-off of the heating function if the connected external temperature sensor is not immersed in the medium. Function selectable, timeout time adjustable (Error 5) PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters. Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 100 temperature sensor is included. The stainless steel composite hot plate with white ceramic coating, reaching a temperature of 340 °C, enables rapid heating and very good chemical resiatance. RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, the current temperature is displayed when the unit is switched off but surface is still hot. Below 50 °C the display turns off automatically.INCLUDED: The RET control-visc white includes: - RET control-visc white - PT 100.70 Temperature sensor - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - Screw driver - H 104 Cover for RET control - USB Cable - USB A to Micro-B, 2 m - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-FLOW Ultimate 120 Peristaltic Pump Accurate dosing is particularly important in the pha (more)rmaceutical, cosmetic or food sector. Comprehensible process conditions are a prerequisite for the safe conveyance of sensitive media. This is ensured by a control accuracy of ±1% and precise speed adjustment (5 — 120 rpm). In addition, an optional foot switch allows the pump to be operated in closed exhaust hoods. The parameters - speed, direction of rotation and on/off function - can be controlled externally either through the analog or digital interface. In this model, you can choose between a single-channel or multichannel pump head. Flow rates vary depending on the pump head: the single-channel head has a flow rate of 0.38 — 813 ml/min; for the multi-channel head 0.005 — 364 ml/min. Depending on the focus of the process, the following parameters can be set on the device: Speed, tubing diameter, flow rate display, metering volume, interval dosing and break times. The pump can be calibrated for optimum dosing results. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Ultimate 120 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Microtip probes are available in tapered and stepped configurations and are designed to process samp (more)les contained in small diameter vessels at extremely high intensity (refer to chart for recommended volumes). Tapered microtips screw into standard 1/2" step horns with tapped ends. The double stepped microtip consists of a coupler and a stepped tip and screws directly into the converter. It has lower amplitude than the tapered tip, but is capable of reaching into small diameter vessels of greater depth and can process solutions down to 0.1 mL. Typical Applications: - Micro-tapered is recommended for processing spores, fungi, yeast, muscle, and connective tissue. - Double Stepped Microtip –is recommended for red and white blood cells, tissue culture cells, HELA cells, and cells which have a low to medium resistance to breakage. Attaches to converter only. For use with Branson SFX250, SFX550, 250 & 450 Sonifiers. Only attach Microtip to Disruptor horn; attach 2-piece. Double-step Microtip to converter only. Tip Diameter 1/8” (3mm) Intensity Very High Ampl. Range 64-247 Volume 0.1 – 10ml

Boekel Scientific 14792 Round Tissue Bath, 115V The Boekel Scientific Round Tissue Flotation Bath ha (more)s a black ceramic coated basin and a wide rim for drying microscope slides. The unit has analog control with a heating light indicator and an on/off switch. Supplied with dust cover, thermometer holder and non-skid rubber feet. Made in the USA. Features: •Edges serve as a convenient drying surface for processed slides •Bath surface is black ceramic coated steel for improved visibility of tissue sections •Supplied with dust cover, thermometer holder and non-skid rubber feet •Equipped with on/off switch, pilot light, and thermostat •Durable and inexpensive •Rapid heat-up •Easy to clean and maintain INCLUDED: The Boekel Scientific 14792 Round Tissue Bath, 115V includes: - Dust Cover - Thermometer Holder - Non-skid Rubber Feet - Power Cord - Operator's Guide - Manufacturer's Documentation Boekel Scientific 14792 Round Tissue Bath, 115V Technical SpecificationsCatalog Number:14792, 14792-2Temperature Range:35°C to 65°CCapacity:1 LShipping Weight:3.2 kg (7 lbs.)Chamber Dimensions in/cm:8 1/4 dia x 2" D 21 cm x 5.1 cmProduct Dimensions W x D x H in/cm:11 D x 3 3/4 H 27.9 cm x 9.2 cmElectrical:14792 115 VAC 50/60Hz 190WComparison of ModelsSpecification145702 Illuminated Tissue Bath145951 Illuminated Tissue Bath w/ Dryer & Orienter14792 Round Tissue BathTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°C35°C to 65°CTemperature Accuracy±1°C±1°C at 55°CN/AStability±1°C±1°CN/AOverall Dimensions (W x L x H)36.2 x 36.2 x 11.4 cm (14.25 x 14.25 x 4.5 in)36.2 x 36.2 x 11.4 cm (14.25 x 14.25 x 4.5 in)27.9 cm D x 9.2 cm H (11" D x 3 3/4" H)Shipping Weight12 lbs (5.44 kg)12 lbs (5.4 kg)7 lbs (3.2 kg)Electrical115 VAC 50/60 Hz 272 W UL and CSA Certified115 VAC 50/60 Hz 272 W UL and CSA Certified115 VAC 50/60Hz 190W.comparison-table tr td:nth-child(4) { background-color: #fffacd; }