Incubators

Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.)cu.ft.) Features - 384 L (13.6 cu. ft.) volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert HPP410eco Climate Chamber 384L, 115V offers precise climate control for a wide range of laboratory applications. With a 384-liter capacity and a temperature range from +5°C to +70°C (with humidity) or 0°C to +70°C (without humidity), this chamber provides versatile conditions for storage and incubation. Equipped with dual Pt100 sensors for accurate temperature control to 0.1°C, it ensures reliable performance and consistent environmental conditions. The adjustable humidity range from 10% to 90% RH, controlled by a hot steam generator and dehumidified by Peltier technology, allows for flexible climate simulation, making it ideal for sensitive samples. The TwinDISPLAY control system, powered by a PID microprocessor, ensures easy and precise adjustments, while the AtmoCONTROL software enables programmability via USB or Ethernet. Safety is a top priority, with the integrated AutoSAFETY system offering visual and acoustic alarms for over- and undertemperature protection. The durable stainless steel door with a 2-point locking system and an inner glass door provides secure access while maintaining energy efficiency. With a maximum chamber load of 440 lbs and support for up to 14 shelves, the HPP410eco delivers exceptional capacity and reliability for demanding laboratory environments. INCLUDED: The Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP30plus Peltier-Cooled Forced Circulation Incubator 32L, 115V Setting Temperature Range A (more)mbient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP30plus Peltier-Cooled Forced Circulation Incubator 32L, 115V provides precise and energy-efficient temperature control, ideal for laboratories needing reliable incubation solutions. With a 32-liter capacity and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, this incubator offers flexibility for a wide range of applications. The advanced Peltier heating and cooling system, combined with individually controlled upper and lower elements, ensures even temperature distribution. The intuitive ControlCOCKPIT with TwinDISPLAY and adaptive PID-microprocessor controller makes it easy to monitor and adjust settings, while the SetpointWAIT function ensures processes only start when the desired temperature is reached. Safety is paramount in the IPP30plus, with over- and undertemperature monitors and the integrated AutoSAFETY protection system providing visual and acoustic alarms in case of deviation. The incubator's stainless steel interior and textured exterior are built for durability, offering resistance to corrosion and easy cleaning. It also features three freely selectable temperature calibration points for precision control, and an autodiagnostic system for fault detection, ensuring long-term reliability in any laboratory setting. INCLUDED: The Memmert IPP30plus Peltier-Cooled Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V Setting Temperature Range Ambie (more)nt 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V offers precise temperature control for a wide range of laboratory applications. With a temperature range from 0°C to +70°C and a setting accuracy of 0.1°C, this incubator ensures reliable and consistent results. Its energy-saving Peltier heating/cooling system is designed for efficiency, while the advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display makes operation intuitive. The SetpointWAIT function ensures that processes begin only once the set temperature is reached, providing additional accuracy and peace of mind. This 32-liter incubator features a corrosion-resistant stainless steel interior and a textured stainless steel exterior, ensuring durability and long-lasting performance. The unit is equipped with an adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety, while the autodiagnostic system offers fault analysis. With a maximum chamber load of 132 lbs and support for up to three shelves, the IPP30 is designed to handle a variety of samples, making it an ideal solution for laboratories that require precise, reliable, and energy-efficient incubation. INCLUDED: The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP260ecoplus Peltier-Cooled Forced Circulation Incubator 256L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 256 L (9 cu.ft.) Features - 256 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP260ecoplus Peltier-Cooled Forced Circulation Incubator 256L, 115V is a high-capacity, energy-efficient solution for precision temperature control in laboratory environments. With a substantial 256-liter volume and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, it is ideal for handling large sample loads and diverse incubation requirements. The incubator features an advanced Peltier heating and cooling system with individually controlled upper and lower elements, ensuring even temperature distribution. Its intuitive ControlCOCKPIT, equipped with TwinDISPLAY and adaptive PID-microprocessor controller, provides effortless control over temperature and other settings, while the SetpointWAIT function enhances accuracy by initiating process timing only once the desired temperature is reached. Safety and durability are central to the IPP260ecoplus. The AutoSAFETY system includes over- and undertemperature protection with visual and acoustic alarms, automatically adjusting to the setpoint tolerance range to protect samples. The incubator’s stainless steel interior and textured exterior are designed for long-term corrosion resistance and easy maintenance. With nine adjustable shelves and a maximum chamber load capacity of 661 lbs, it supports extensive sample storage, making it a reliable and versatile addition to any laboratory focused on precision and safety.. INCLUDED: The Memmert IPP260ecoplus Peltier-Cooled Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 256 L (9 cu.ft.)cu.ft.) Features - 256 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V offers a substantial 256-liter capacity, making it ideal for laboratories that require precise temperature control for larger sample volumes. With a setting temperature range from 0°C to +70°C and an accuracy of 0.1°C, this incubator ensures consistent, reliable results across a variety of applications. The energy-efficient Peltier heating and cooling system, along with the ControlCOCKPIT digital PID-microprocessor controller and high-definition TFT-color display, allows for intuitive control and easy monitoring. The SetpointWAIT function ensures the process begins only when the target temperature is reached, enhancing accuracy and performance. This incubator is also environmentally friendly, featuring a refrigerant-free design that maximizes energy efficiency. The durable stainless steel interior and textured stainless steel exterior are corrosion-resistant, ensuring long-term durability in demanding lab environments. With the capacity to hold up to nine shelves and a maximum chamber load of 661 lbs, the IPP260eco is versatile enough to handle a wide range of samples. Safety is paramount, with an adjustable electronic overtemperature monitor, mechanical temperature limiter, and autodiagnostic system for fault analysis, providing peace of mind during operation. This incubator delivers superior performance with a focus on sustainability and reliability. INCLUDED: The Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP2200ecoplus Peltier-Cooled Forced Circulation Incubator 2140L, 115V Temperature Range 0° (more)C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP2200ecoplus Peltier-Cooled Forced Circulation Incubator 2140L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP2200ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP2200ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP2200ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP2200ecoplus Peltier-Cooled Forced Circulation Incubator 2140L, 115V includes: - 6 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP2200eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP2200eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP2200eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V includes: - 6 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V Temperature Range 0° (more)C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP1400ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP1400ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP1400ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V includes: - 4 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1400eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1400eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1400eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V includes: - 4 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 108 L (3.8 cu.ft.) Features - 108 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V delivers precise, energy-efficient temperature control for advanced laboratory applications. With a generous 108-liter capacity and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, this incubator supports a variety of sample requirements. The energy-saving Peltier heating and cooling system, featuring individually controlled upper and lower elements, ensures uniform and reliable temperature distribution. The intuitive ControlCOCKPIT with TwinDISPLAY, equipped with a PID-microprocessor controller and high-definition TFT displays, provides easy monitoring, while the SetpointWAIT function enhances accuracy by starting process timing only once the desired temperature is reached. This incubator’s robust stainless steel interior and textured exterior resist corrosion and allow for easy maintenance, ideal for long-term use in demanding environments. Safety features include an AutoSAFETY over- and undertemperature monitor with both visual and acoustic alarms, ensuring protection for sensitive samples. Additional features, such as three customizable temperature calibration points, an autodiagnostic system for fault detection, and a capacity for up to five shelves with a maximum chamber load of 330 lbs, make the IPP110ecoplus a versatile and reliable choice for modern labs. INCLUDED: The Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 108 L (3.8 cu.ft.) Features - 108 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V is designed for laboratories that prioritize both precision and sustainability. With a setting temperature range from 0°C to +70°C and a 108-liter capacity, this incubator ensures consistent and versatile temperature control for a wide range of applications. The energy-efficient Peltier heating and cooling system, combined with the ControlCOCKPIT digital controller and high-definition TFT-color display, provides seamless operation. The SetpointWAIT function ensures that processes only begin once the set temperature is reached, maximizing precision, while the three freely selectable calibration points further enhance accuracy. This environmentally friendly incubator features a refrigerant-free design, making it a sustainable choice for laboratories. The durable, corrosion-resistant stainless steel interior and textured stainless steel casing are built to last, ensuring long-term reliability. With a maximum chamber load of 330 lbs and support for up to five shelves, the IPP110eco accommodates large or multiple samples with ease. Safety is enhanced by an adjustable electronic overtemperature monitor and mechanical temperature limiter, while the autodiagnostic system provides fault analysis to ensure smooth operation. This incubator offers a perfect blend of precision, energy efficiency, and eco-conscious design. INCLUDED: The Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V Temperature Range 0° (more)C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1060L (37.4 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP1060ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP1060ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP1060ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1060L (37.4 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1060eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1060eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1060eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF75plus Forced Circulation Incubator 74L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 74 L (2.6 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 74 L (2.6 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF75plus Forced Circulation Incubator 74L, 115V offers precise temperature control with a working temperature range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, ensuring consistent conditions for sensitive lab processes. Its 74 L (2.61 cu.ft.) stainless steel interior is designed for durability and easy cleaning, while the TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT-color displays provides intuitive control over key parameters such as temperature, fan speed, and air flap position. The forced air circulation system, adjustable in 10% steps, ensures even temperature distribution, making it ideal for various laboratory applications. For enhanced safety, the Memmert IF75plus is equipped with AutoSAFETY features, including an over- and undertemperature monitor, and a mechanical temperature limiter TB for added protection. The Function SetpointWAIT ensures the process only starts when the target temperature is reached, optimizing precision. Additionally, the incubator includes a fixed sterilization program at 160°C for chamber cleaning, as well as an autodiagnostic system for fault analysis. With its robust construction and reliable performance, this incubator is a practical choice for maintaining optimal conditions in the lab. INCLUDED: The Memmert IF75plus Forced Circulation Incubator 74L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF750plus Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 749 L (26.5 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF750plus Forced Circulation Incubator 749L, 115V offers a spacious 749 L (26.5 cu.ft.) chamber with a stainless steel interior designed for easy cleaning and durability. This incubator provides precise control with a working temperature range starting from Min. 10°C above ambient up to +80°C and an accuracy of 0.1°C. Its TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, featuring dual high-definition TFT-color displays, allows users to easily adjust settings like temperature, fan speed, air flap position, and program time for optimal performance in diverse applications. Equipped with AutoSAFETY, the Memmert IF750plus includes both over- and undertemperature monitoring systems and a mechanical temperature limiter TB for enhanced safety. The forced air circulation system, with an adjustable fan in 10% steps and pre-heated fresh air admixture, ensures consistent temperature distribution. Additionally, the Function SetpointWAIT guarantees that processes only begin once the desired temperature is reached, ensuring precise results. The incubator also features a sterilization program that runs at 160°C for 4 hours, maintaining a clean working chamber suitable for sensitive experiments. INCLUDED: The Memmert IF750plus Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF750 Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 749 L (26.5 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF750 Forced Circulation Incubator 749L, 115V offers an expansive 749 L (26.5 cu.ft.) volume, making it an excellent choice for large-scale laboratory operations. Its setting temperature range spans from +20°C to +80°C, with a working range starting at Min. 10°C above ambient. The incubator features a robust ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display, allowing for precise control over key parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time. Its easy-to-clean stainless steel interior is reinforced with deep drawn ribbing and integrated heating on four sides, ensuring durability and optimal heat distribution. Designed for safety and efficiency, the IF750 includes an adjustable overtemperature monitor and mechanical temperature limiter TB, in compliance with DIN 12880 standards. The forced air circulation system, driven by a quiet air turbine, is adjustable in 10% increments, ensuring even airflow and precise temperature control. With space for up to 14 shelves and a maximum chamber load of 661 lbs, this incubator is suitable for high-capacity workloads. Additional features like AtmoCONTROL software, a fully insulated stainless steel door with inner glass, and autodiagnostic systems make the IF750 a powerful tool for any lab environment. INCLUDED: The Memmert IF750 Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF55plus Forced Circulation Incubator 53L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 53 L (1.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 53 L (1.9 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF55plus Forced Circulation Incubator 53L, 115V provides precise temperature control with a working temperature range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, ensuring reliable performance for various lab applications. Its 53 L (1.1 cu.ft.) stainless steel interior is easy to clean and reinforced for durability, while the TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT-color displays offers clear and intuitive control. The incubator features forced air circulation, adjustable in 10% steps, and pre-heated fresh air admixture to maintain uniform temperature throughout the chamber. Safety is prioritized with the inclusion of AutoSAFETY, which integrates over- and undertemperature monitoring, along with a mechanical temperature limiter (TB) for added protection. The Function SetpointWAIT ensures processes only begin once the set temperature is reached, enhancing experimental accuracy. Other key features include a fixed sterilization program for the chamber, autodiagnostic system for fault detection, and a fully insulated stainless steel door with 2-point locking, making it a dependable choice for sensitive laboratory processes. INCLUDED: The Memmert IF55plus Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF450plus Forced Circulation Incubator 449L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 449 L (15.9 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF450plus Forced Circulation Incubator 449L, 115V provides precise temperature control with a working range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, making it an ideal solution for sensitive laboratory applications. With a large 449 L (15.9 cu.ft.) stainless steel chamber, this incubator offers ample space and is designed for durability and easy cleaning. The TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller features dual high-definition TFT-color displays, enabling precise adjustments of temperature, fan speed, and other critical parameters. Equipped with AutoSAFETY features, the IF450plus offers over- and undertemperature monitoring along with a mechanical temperature limiter TB for enhanced safety. The forced air circulation system allows for fan speed adjustments in 10% increments and includes a pre-heated fresh air admixture for consistent performance. The Function SetpointWAIT ensures that the process only begins when the set temperature is reached, ensuring reliable outcomes. Additionally, the fixed sterilization program provides thorough chamber cleaning at 160°C for 4 hours, ensuring a hygienic environment for sensitive experiments. INCLUDED: The Memmert IF450plus Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF450 Forced Circulation Incubator 449L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 449 L (15.9 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF450 Forced Circulation Incubator 449L, 115V offers precise temperature control with a setting range from +20°C to +80°C and a working range starting at Min. 10°C above ambient. Its large 449 L (15.9 cu.ft.) stainless steel interior, reinforced with deep drawn ribbing, ensures durability and easy cleaning, making it ideal for large-scale applications. The advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display allows users to adjust various parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time, providing optimal control over the incubation process. This incubator features quiet forced air circulation with a turbine, adjustable in 10% increments, ensuring even temperature distribution and pre-heated fresh air admixture. Safety is ensured through an adjustable overtemperature monitor and mechanical temperature limiter TB, meeting DIN 12880 standards. Additional features include AtmoCONTROL software for advanced programming and data management, with support for up to 8 shelves and a maximum chamber load of 661 lbs. The IF450 combines high capacity, safety, and precision, making it suitable for demanding laboratory environments. INCLUDED: The Memmert IF450 Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF30plus Forced Circulation Incubator 32L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 32 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 32 L (1.1 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF30plus Forced Circulation Incubator 32L, 115V is a reliable solution for precise temperature control in laboratory environments. With a setting temperature range from +20°C to +80°C and an impressive accuracy of 0.1°C, this incubator ensures consistent and uniform heating for sensitive applications. Its 32L (1.1 cu.ft.) capacity, combined with a reinforced stainless steel interior, provides ample space for diverse sample types while maintaining easy-to-clean surfaces. The advanced ControlCOCKPIT twin display system offers an intuitive interface with dual high-definition TFT-color interfaces, enabling seamless control over critical parameters such as temperature, fan speed, and air flap position. The forced air circulation system, adjustable in 10% steps, ensures optimal airflow and uniform heating. Safety is at the core of the Memmert IF30plus design, featuring AutoSAFETY systems with integrated over- and undertemperature monitors to protect samples and equipment. The incubator is equipped with dual Pt100 sensors for mutual temperature monitoring and performance assurance, while the adjustable overtemperature monitor and mechanical temperature limiter (TB) comply with DIN 12880 standards. Additional features include a sterilization program for the chamber, function SetpointWAIT to ensure the process only begins once the target temperature is reached, and built-in audible and visual alarms to enhance operational safety. The durable stainless steel construction ensures long-term reliability, making this incubator ideal for a wide range of lab applications. INCLUDED: The Memmert IF30plus Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF260plus Forced Circulation Incubator 256L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 256 L (9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 256 L (9 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF260plus Forced Circulation Incubator 256L, 115V offers precise temperature control within a range from Min. 10°C above ambient up to +80°C, with a 0.1°C accuracy, making it ideal for highly sensitive lab applications. Featuring a spacious 256 L (9 cu.ft.) stainless steel interior, this incubator is designed for easy cleaning and durability. The TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with dual high-definition TFT-color displays allows for precise control over various parameters, including temperature, fan speed, and program time. Equipped with AutoSAFETY features, the IF260plus ensures over- and undertemperature protection, along with a mechanical temperature limiter TB for added safety. Forced air circulation is adjustable in 10% steps, with pre-heated fresh air admixture for optimal performance. The Function SetpointWAIT ensures the process only begins once the set temperature is achieved, providing reliable and consistent results. Additionally, the unit includes a sterilization program that cleans the chamber at 160°C for 4 hours, offering efficient maintenance between uses. This incubator is well-suited for demanding lab environments requiring precision and reliability. INCLUDED: The Memmert IF260plus Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF260 Forced Circulation Incubator 256L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 256 L (9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 256 L (9 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF260 Forced Circulation Incubator 256L, 115V offers precise temperature control with a setting range from +20°C to +80°C and a working range starting at Min. 10°C above ambient. Its spacious 256 L (9.04 cu.ft.) stainless steel interior, reinforced with deep drawn ribbing, ensures durability and easy cleaning, making it ideal for various lab applications. Equipped with the ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller and a high-definition TFT-color display, it allows users to fine-tune parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time for optimal control and efficiency. This incubator features forced air circulation powered by a quiet air turbine, adjustable in 10% increments, with a pre-heated fresh air admixture for enhanced performance. Safety mechanisms include an adjustable overtemperature monitor and mechanical temperature limiter TB, ensuring protection according to DIN 12880 standards. The IF260 also supports AtmoCONTROL software for programming and data management. With the ability to handle a maximum chamber load of 661 lbs across 9 shelves, this incubator combines precision, safety, and functionality for a wide range of laboratory requirements. INCLUDED: The Memmert IF260 Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF160plus Forced Circulation Incubator 161L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 161 L (5.7 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 161 L (5.7 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF160plus Forced Circulation Incubator 161L, 115V provides precise temperature control with a working range from Min. 10°C above ambient up to +80°C, ensuring reliable environmental conditions for laboratory applications. With a spacious 161 L (5.7 cu.ft.) stainless steel interior, this incubator is designed for easy cleaning and long-lasting use. It features TwinDISPLAY adaptive multifunctional digital PID-microprocessor control, allowing users to adjust parameters like temperature, fan speed, air flap position, and program time with high accuracy, thanks to its two high-definition TFT-color displays. For safety and efficiency, the IF160plus includes AutoSAFETY with integrated over- and undertemperature monitoring, as well as a mechanical temperature limiter TB, ensuring optimal protection for your processes. The Function SetpointWAIT ensures that the process starts only after reaching the set temperature. Additional features include forced air circulation, adjustable in 10% steps, and a sterilization program for chamber cleaning at 160°C for 4 hours. These advanced features make the IF160plus ideal for precision-driven lab environments requiring robust performance. INCLUDED: The Memmert IF160plus Forced Circulation Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF160 Forced Circulation Incubator 161L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 161 L (5.7 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 161 L (5.7 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF160 Forced Circulation Incubator 161L, 115V is designed to offer precise temperature control with a setting range from +20°C to +80°C and a working range starting at Min. 10°C above ambient. Its spacious 161 L (5.7 cu.ft.) stainless steel interior, reinforced with deep drawn ribbing, ensures durability and easy cleaning. Equipped with the advanced ControlCOCKPIT digital PID-microprocessor controller and a high-definition TFT-color display, this incubator allows users to adjust parameters such as temperature (in Celsius or Fahrenheit), fan speed, air flap position, and program time for optimized functionality. The IF160 also features forced air circulation through a quiet turbine, adjustable in 10% steps, and pre-heated fresh air admixture for enhanced performance. Safety is prioritized with an adjustable overtemperature monitor, mechanical temperature limiter TB, and autodiagnostic system for fault analysis. Additionally, it supports AtmoCONTROL software for efficient data management. With a maximum chamber load of 462 lbs across 8 shelves and a range of user-friendly features, this incubator provides precise and reliable incubation for various laboratory applications. INCLUDED: The Memmert IF160 Forced Circulation Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF110plus Forced Circulation Incubator 108L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 108 L (3.8 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF110plus Forced Circulation Incubator 108L, 115V offers a precise working temperature range starting from Min. 10°C above ambient up to +80°C with 0.1°C accuracy, ensuring optimal environmental conditions for laboratory processes. Its spacious 108 L (3.8 cu.ft.) stainless steel interior is designed for durability and ease of cleaning, making it ideal for routine use in demanding lab environments. The TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, equipped with two high-definition TFT-color displays, allows users to easily monitor and adjust key parameters like temperature, fan speed, and air flap position, all with intuitive control. For enhanced safety, the IF110plus features AutoSAFETY with integrated over- and undertemperature monitoring and a mechanical temperature limiter TB for additional protection. The Function SetpointWAIT ensures the process begins only once the desired temperature is reached, increasing precision. Additionally, the incubator includes a fixed sterilization program, which operates at 160°C for 4 hours to clean the chamber. With forced air circulation, adjustable in 10% steps, and the ability to manage fresh air admixture, this incubator is both efficient and reliable for various laboratory applications. INCLUDED: The Memmert IF110plus Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN75plus Natural Convection Incubator 74L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 74 L (2.6 cu.ft.) Features - Setting temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Internal volume of 74 L (2.6 cu.ft.) with a maximum chamber load of 264 lbs (120 kg) - ControlCOCKPIT with TwinDISPLAY, featuring an adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Natural convection system and admixture of pre-heated fresh air by electronically adjustable air flap - Includes AtmoCONTROL software for data logging via Ethernet interface, USB stick available as an accessory - Temperature control features adjustable overtemperature monitor and mechanical temperature limiter according to DIN 12880 - Comes with two stainless steel grids, fully insulated stainless steel door, and an inner glass door - Stainless steel interior, reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IN75plus Natural Convection Incubator 74L, 115V offers advanced temperature control and versatility for various laboratory applications. With a setting temperature range from +20 to +80°C and a working temperature range starting 5°C above ambient, it ensures precise incubation conditions. The TwinDISPLAY ControlCOCKPIT allows for easy adjustment of essential parameters like temperature, air flap position, and timer, while two Pt100 sensors ensure accurate temperature monitoring and mutual functionality in case of sensor failure. The natural convection system guarantees uniform temperature distribution, ideal for sensitive samples, and the adjustable pre-heated fresh air admixture helps maintain optimal air quality within the chamber. This incubator also features a durable stainless steel interior with a capacity of 74 liters, reinforced by deep drawn ribbing and integrated large-area heating for even thermal regulation. The fully insulated stainless steel door with an inner glass door provides safety and visibility. With AtmoCONTROL software, users can conveniently manage data logging and programming through USB or Ethernet. The IN75plus is built for high-performance with a maximum chamber load of 264 lbs and can accommodate up to six shelves, making it a robust, reliable choice for professional laboratory environments. INCLUDED: TheMemmert IN75plus Natural Convection Incubator 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN750plus Natural Convection Incubator 749L, 115V Setting Temperature Range +20 to +80 °C C (more)onvection Type Natural Convection Chamber Volume 749 L (26.4 cu.ft.) Features - Set temperature range from +20 to +80°C, with a working range of at least 5°C above ambient - Precise temperature control with a resolution of 0.1°C, adjustable in Celsius or Fahrenheit - Advanced Control Technology with the ability to adjust parameters including air flap position, program time, and time zones - Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber, ensuring a contaminant-free environment - AutoSAFETY system with integrated over- and undertemperature protection (ASF) and an audible/visual alarm for reliable safety - Durable interior made of stainless steel with deep-drawn ribbing and protected heating elements on all four sides - High-capacity chamber load of up to 661 kg with adjustable stainless steel shelving for flexibility in storage - Exterior constructed from textured stainless steel, providing superior resistance to corrosion and wear The Memmert IN750plus Natural Convection Incubator 749L, 115V offers an exceptional combination of precise temperature control and safety features for high-capacity applications. With a spacious 749-liter chamber, this incubator provides a temperature range from +20°C to +80°C, ensuring that your samples remain consistently within the desired conditions. The dual high-definition TFT-color displays of the ControlCOCKPIT adaptive digital PID-microprocessor controller allow for easy monitoring and adjustments. For enhanced precision, the system utilizes two Pt100 Class A sensors in a 4-wire circuit to mutually monitor temperature, ensuring optimal conditions even in demanding situations. The incubator also includes a fixed sterilization program for the working chamber, with 4-hour cycles at 160°C to maintain a sterile environment. Safety and durability are key features of the Memmert IN750plus. The AutoSAFETY system provides over- and undertemperature protection by automatically adjusting according to setpoint values, with alarms to alert users in case of deviations. The exterior is constructed from durable, textured stainless steel that resists corrosion and wear, while the interior features deep-drawn ribbing and large-area heating on all four sides for consistent heat distribution. The interior's stainless-steel design enhances the incubator’s longevity and hygiene, making it ideal for temperature-sensitive applications in laboratories and industrial settings. Additionally, adjustable shelving allows for flexible sample arrangements and can support a maximum chamber load of up to 661 kg, ensuring versatility for diverse lab requirements. INCLUDED: TheMemmert IN750plus Natural Convection Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN55plus Natural Convection Incubator 53L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 53 L (1.9 cu.ft.) Features - Internal volume of 53 L (1.9 cu.ft.) for versatile storage needs - Adjustable temperature range from +20°C to +80°C, with a working range at least 5°C above ambient - Precise control with 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring - ControlCOCKPIT with TwinDISPLAY, featuring an adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT displays - Natural convection system for uniform temperature distribution, ensuring optimal results - Electronically adjustable air flap allows for admixture of pre-heated fresh air - Includes AtmoCONTROL software for managing and organizing data via Ethernet or USB interface - Safety features include adjustable electronic overtemperature monitor, AutoSAFETY system, and audible/visual alarms The Memmert IN55plus Natural Convection Incubator 53L, 115V offers precision and reliability for a wide range of laboratory needs. With an internal volume of 53 liters (1.9 cu.ft.), it provides ample space for your samples, all while maintaining a temperature range of +20°C to +80°C. The incubator is equipped with two Pt100 sensors in a 4-wire-circuit for mutual monitoring, ensuring highly accurate temperature control. Its advanced ControlCOCKPIT with TwinDISPLAY provides user-friendly operation, allowing you to adjust parameters like temperature, air flap position, and program time, all displayed on high-definition TFT screens. Designed with natural convection, this incubator ensures uniform temperature distribution without the need for a fan, making it ideal for delicate samples. The electronically adjustable air flap allows for precise control of fresh air admixture, ensuring optimal conditions. Safety is a priority with features like adjustable overtemperature protection, the AutoSAFETY system, and audible/visual alarms. Additionally, the Memmert IN55plus includes AtmoCONTROL software, enabling efficient data management through USB or Ethernet connections. INCLUDED: TheMemmert IN55plus Natural Convection Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN450plus Natural Convection Incubator 449L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20 to +80°C with a working range at least 5°C above ambient - Internal volume of 449 L (15.9 cu.ft.) for large capacity applications - Precise temperature control with 0.1°C setting resolution using 2 Pt100 sensors DIN Class A in a 4-wire circuit - ControlCOCKPIT with TwinDISPLAY offers advanced PID-microprocessor control and two high-definition TFT-color displays - Natural convection with adjustable pre-heated fresh air admixture through electronically controlled air flap - Digital timer with backwards counting, adjustable from 1 minute to 99 days - Two stainless steel, electropolished grids, with a max chamber load of 661 lbs (300 kg) - AtmoCONTROL software for data logging and program management via USB or Ethernet interface The Memmert IN450plus Natural Convection Incubator 449L, 115V is engineered for precise temperature control and optimal efficiency, making it an ideal choice for various laboratory applications. With an internal volume of 449 liters (15.9 cubic feet), this large-capacity incubator provides ample space for accommodating multiple samples and materials. The ControlCOCKPIT TwinDISPLAY system features an adaptive digital PID-microprocessor controller with dual high-definition TFT-color displays, enabling users to precisely set and monitor temperatures. The incubator's temperature range of +20 to +80°C, combined with a 0.1°C resolution, ensures highly accurate thermal conditions. Dual Pt100 sensors in a 4-wire circuit provide additional temperature monitoring, automatically taking over if an error is detected. Designed for flexibility and safety, the IN450plus offers advanced features like the HeatBALANCE function, which allows adjustments to the heating distribution between the upper and lower circuits from -50% to +50%, ensuring consistent temperature uniformity. Natural convection, combined with electronically controlled air flap adjustments, facilitates an even admixture of pre-heated fresh air. The unit is equipped with comprehensive safety measures such as AutoSAFETY and adjustable overtemperature monitors. Additionally, the AtmoCONTROL software offers intuitive programming and data logging capabilities via USB or Ethernet, making it simple to store and manage programs even in the event of a power failure. Built with a robust stainless steel interior and reinforced with deep-drawn ribbing, this incubator is both durable and easy to clean, making it a reliable choice for rigorous laboratory environments. INCLUDED: TheMemmert IN450plus Natural Convection Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN30plus Natural Convection Incubator 32L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L (1.1 cu.ft.) stainless steel chamber for efficient and durable sample storage - Precise temperature control with an adjustable range from +20°C to +80°C, ensuring consistent performance even 5°C above ambient - Dual Pt100 sensors in a 4-wire circuit deliver reliable monitoring and safety redundancy - Intuitive ControlCOCKPIT with TwinDISPLAY and adaptive PID-microprocessor controller for enhanced user experience - Natural convection for uniform temperature distribution, perfect for sensitive applications - Electronically adjustable air flap provides optimized pre-heated fresh air admixture for sample protection - Maximizes productivity with a chamber load capacity of 132 lbs, supporting heavier samples - Built-in AutoSAFETY and autodiagnostic systems ensure worry-free operation and advanced protection The Memmert IN30plus Natural Convection Incubator 32L, 115V offers precise and reliable temperature control for sensitive sample incubation. With a setting temperature range of +20°C to +80°C and working capability 5°C above ambient, this compact 32 L stainless steel chamber is ideal for a variety of laboratory needs. Equipped with dual Pt100 sensors in a 4-wire circuit, it ensures accurate monitoring and safety through redundancy. The TwinDISPLAY ControlCOCKPIT with an adaptive PID-microprocessor controller provides intuitive user control, while the natural convection system ensures uniform temperature distribution throughout the chamber. Designed for efficiency and user convenience, the incubator features an electronically adjustable air flap for the precise admixture of pre-heated fresh air. With a maximum chamber load of 132 lbs, it supports high-capacity sample handling. The Memmert IN30plus also includes advanced safety features, such as AutoSAFETY, an overtemperature monitor, and an autodiagnostic system, ensuring continuous and secure operation. This high-performance incubator is a dependable solution for labs seeking consistent results and easy operation. INCLUDED: TheMemmert IN30plus Natural Convection Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty