Water bath with stirring LAUDA Hydro H 20 SW

Vacucell Evo 111 Double Compartment Vacuum Oven With Vacustation Lab This item was removed from a un (more)iversity where it was surplus to requirement. It is in excellent cosmetic condition and full working order. The previous client has stated that it was not used since its purchase in 2018. This item requires a Password for operation, which is available on request when purchased. Also includes the following: 1 x Vacuubrand Chemistry Hybrid RC 6 Pump- Full working order. 1 x Epson Printer- Full working order.

1x Dyno Mill Grinder KDL A1x Tricool chiller MINAC 005LTS These items were removed from a university (more) lab where they were surplus to requirements. Both items are in good cosmetic condition and power on, we are unable to test them further at our facility. Information from the client states both units are in working order.

Yamato DR-201-115V Programmable High Temperature Natural Convection Oven 13.75L, 115V Temperature Ra (more)nge Ambient +5°C to 260°C Temperature Distribution Accuracy ± 5.0°C at 260°C Chamber Volume 162L Features - Wide temperature range, maximum operation temperature up to 700°C - Equipped with high operability temperature controller - Can be used as an electric furnace for ashing and sintering, but also as an incubator and drying oven - Temperature, measured temperature and overheat prevention temperature can be digitally set by operation menu and ▲/▼ keys - Easy programmable operation, fixed temperature, quick auto stop, auto stop, program auto start, auto start - Lock function, auto recovery after power failure, calibration offset The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V offers excellent temperature accuracy and user-friendly operation. It features a 6 pattern PID program controller, capable of executing complex programs (30 steps x 1, 15 steps x 2, 10 steps x 3), and displays both set and measured temperatures simultaneously. This oven operates within a temperature range of room temperature +5 to 260°C, achieving temperature control accuracy of ±1.0°C and distribution accuracy of ±5.0°C at 260°C. It can reach its maximum temperature in approximately 90 minutes. Constructed with a stainless-steel interior and a cold rolled steel plate exterior with a melamine resin baking finish, the DVS-402C is easy to maintain. It features glass wool insulation, a 1.2kW stainless pipe heater, and includes an observation window made of chemically strengthened glass. Additional features include a cable hole, exhaust ports, a comprehensive timer, and various operation functions like Auto Start, Auto Stop, and Quick Auto-stop. Safety is ensured with self-diagnostic functions and an electric leakage breaker with overcurrent protection. The internal dimensions are 450×490×450mm, external dimensions are 560×601×820mm, and it can support a shelf plate load of about 15kg. The DVS-402C is ideal for precise, programmable heating applications. INCLUDED: The Yamato DR-201-115V Programmable High Temperature Natural Convection Oven 13.75L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UN110 Natural Convection Oven 108L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 108 L Features - 108 L (3.8 cu.ft.) chamber volume for flexible sample accommodation - Temperature range from +5°C above ambient to +300°C for diverse applications - 1 Pt100 sensor DIN class A in 4-wire circuit for precise monitoring - SingleDISPLAY with digital PID-microprocessor controller and high-definition TFT-color display - Natural convection system for even heat distribution - Electronically adjustable air flap for controlled fresh air admixture - Corrosion-resistant stainless steel interior with integrated heating on all sides - Supports up to 5 grids, with a max chamber load of 386 lbs The Memmert UN110 Natural Convection Oven 108L, 115V provides precision and reliability for diverse laboratory applications with its spacious 108 L (3.8 cu.ft.) chamber and temperature range from +5°C above ambient to 300°C. Featuring a SingleDISPLAY digital PID-microprocessor with high-definition TFT display, this oven allows for precise control, while the Pt100 sensor ensures accurate temperature monitoring. Its natural convection system evenly distributes heat, complemented by an electronically adjustable air flap for optimized airflow. Built with a corrosion-resistant stainless steel interior and capable of supporting up to 5 grids with a maximum load of 386 lbs, the UN110 is engineered for durability and efficient performance. INCLUDED: The Memmert UN110 Natural Convection Oven 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

SCILOGEX SCIP5-Mini LED Recirculating Chiller, -20°C to ambient, 110V, 60Hz.SCILOGEX SCIP5-Mini LED  (more)Recirculating Chiller, -20°C to ambient, 110V, 60Hz.Features & Advantages: - Temperature range: -20C to room temperature - Employs PID temperature control with built-in PT1000 temperature sensor that provides high accuracy of temperature control - A crystal-clear LED display that switches between display of set temperature and that of actual temperature - The entire unit is capable of protection against short circuit, over-current, overload and delayed start - Integrated design of drain outlet and water outlet that allows easy drainage - The compressor employs state-of-the-art R290 environment-friendly refrigerant - The liquid pathway is made of stainless steel or high-quality corrosion-resistant material - User-friendly operating panel for easy operation - A large-volume open reservoir allows easy filling and supports cold trap experiments INCLUDED: The SCILOGEX SCIP5-Mini LED Recirculating Chiller, -20°C to ambient, 110V, 60Hz. includes: - Power Cord - One Year Manufacturer's Warranty

Corepoint Scientific PRF092WWWLH-0 Left Hinged Solid Door Laboratory Combo 1C to 10C Refrigerator/-1 (more)5C to -25C Freezer Temperature Setpoint Range Refrigerator: 1C to 10C; Freezer: -15C -25C Capacity 9 Cu. Ft. Capacity 4.6 Ref/4.2 Freezer Defrost Method Refrigerator: Cycle; Freezer: Manual Features - Combines a refrigerator (4.5 Cu. Ft.) and freezer (4.2 Cu. Ft.) in one compact unit for versatile storage. - Features two solid, left-hinged, self-closing doors with magnetic door gaskets for a positive seal, enhancing energy efficiency. - Equipped with a microprocessor temperature controller and digital temperature display, switchable between °C and °F. - Includes audible and visual high and low temperature alarms for both the refrigerator and freezer. - Utilizes eco-friendly R600a refrigerant; refrigerator features forced draft air circulation, and the freezer has a manual defrost system. - Both compartments are fitted with recessed handles and keyed door locks for secure access. The Corepoint Scientific PRF092WWWLH-0 Laboratory Combo offers a dual-function solution with a left-hinged solid door design that provides a refrigerator and a freezer in one compact unit. This model features a 4.5 cubic feet refrigerator and a 4.2 cubic feet freezer, each tailored to maintain optimal conditions with a temperature range of 1°C to 10°C for the refrigerator and -15°C to -25°C for the freezer. The appliance is designed with self-closing doors that include magnetic gaskets to ensure a secure and energy-efficient seal. The unit's robust construction is supported by high-density urethane foam insulation and a durable powder-coated steel exterior. Both the refrigerator and freezer are fitted with a microprocessor temperature controller that includes a digital display switchable between Celsius and Fahrenheit, ensuring precise temperature management. This system is complemented by forced draft air circulation in the refrigerator for even cooling and efficient operation. INCLUDED: The Corepoint Scientific PRF092WWWLH-0 Left Hinged Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Freezer includes: - Stacking Kit - Leveling Legs - 2 Adjustable Refrigerator Shelves - 2 Fixed Freezer Shelves - Key for Door Lock - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Microcentrifuge refrigerated Biocen 22R. Capacity max. 8 x 15 mL. Speed max. 31.865 xg/ 18.100 rpm.  (more)Rotors from 0.2 to 15 mL. Temperature -20 ºC to 40ºC. Guaranteed 4 ° C at max. rpm. LED screen indicator of rpm/rcf and time. Programming speed in steps of 50 rpm/50 xg. Account the back/increasing from 0 or set rpm/rcf. Watch 1 to 99 min in intervals of 5 sec, and the time indefinite. Control of acceleration/braking progressive. Messages acoustic and visual state of the computer. Control by microcesador. Engine maintenance free. Listing of rotors in memory. Automatic locking and emergency. Safety stop for imbalance. Level noise <60 dB. Rotor not included, view available on description.

If you buy a PUE HY10 Weighing Terminal by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. HOUSING High IP rating and stainless steel facilitate operation of the terminal in challenging working conditions (high humidity, dustiness). With these two characteristics the terminal meets high hygiene standards for food and pharmaceutical industries. The terminal&rsquo;s housing and base are made of stainless steel. All the HY10 connectors are fed through glands, this along with water and dust proof housing guarantee high IP rating, IP68/69. 2-point terminal-base fixing system allows limit-free LCD tilt. Option of tilt angle adjustment improves ergonomics of use and optimises indication visibility. The terminal bracket ensures its stability during operation. Rubber feet prevent unintentional device sliding. They cover openings through which the terminal can be permanently fixed either to a horizontal or vertical surface. DISPLAY 10.1&rdquo; colour display of 1024x600 pixel resolution with a capacitive touchscreen Large, 10.1&rdquo; backlit colour display guarantees easy-to-read information even in low light conditions. The indication can be read from a considerable distance, which increases your mobility. High resolution (1024x600) means high display readability providing crisper digits, symbols etc. Now you will not suffer from eye strain. The higher the resolution the greater comfort of use. The touchscreen stands for ease of operation, simply trust your intuition and start to operate the device. Now accessories such as mouse or keyboard are needless. Additional numeric keys and soft buttons provide maximum functionality. REMOTE CONFIGURATION It is possible to set the HY10 terminal parameters remotely, this is done using &lsquo;Parameters Editor 2.0&rsquo; software. The parameters can also be set via the terminal. Use of &lsquo;Parameters Editor 2.0&rsquo; software allows repeatable parameter setup. Once you set all the parameters for a particular terminal, save them to a file in order to be able to copy them to terminals operating at twinlike workstations. The set parameter configuration can be transferred either using a USB flash drive or a network. &lsquo;Parameters Editor 2.0&rsquo; offers remote desktop option. With this solution we can carry out your terminal&rsquo;s setup even if your company is located miles away from the service. SCREEN EDITOR Customized screen layout, extensive functionality. PUE HY10 terminal offers screen layout customization. You can display only those components that you find indispensable for your work. You can make decision not only on what to add to your screen but also on the size of particular components. Self-designed screen layout makes your work easier, with this weighing is no longer a time-consuming process. LABELLING Ability to design labels for each terminal-performed process. Labelling function, implemented into firmware, enables marking products with weight labels. This makes product identification fast and easy. Using &lsquo;Label Editor&rsquo;, a dedicated software, you can design label which upon being sent to the scale is available for the operator in label database. The label can provide data such as date, batch number, mass, pictogram, Ean-13 code with weight value and product code. Labelling enables: making Label Database in a terminal; assigning either a customized label to a particular product or a common label to a group of products; printing C labels (pallet) and CC labels (containers) providing total weight and quantity; automatically triggered printout of c labels. MULTI-PLATFORM OPERATION Standard design: support of one load-cell platform Optional design: support of 4 extra platforms maximum (2 internal modules plus 2 external modules) Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal&rsquo;s address in the browser address field and log in. The application enables: remote database editing import of images from the graphic file to the scale import of labels from lb file to the scale creating and preview of report, e.g. Workflow dosing processes operation Smart Display Smart Display application allows to customize the scale screen, and to display it on a computer, all this in an easy and clear way. Particular elements must be simply placed on a screen grid. Next, they can be scaled to suit user needs. The application run directly on the scale provides the user with a new, refreshed layout, and the possibility to configure the home screen. When operated via a browser on a computer, it enables remote control of the desktop, and display of enlarged mass indication. To use the Smart Display application it is necessary to run the RDA module (RADWAG Data Access) on the HY10 terminal. Extended Web Interface The application has been designed to enable the user to create his own/her own program for the PUE HY10 terminal. It facilitates exchange of basic data via JSON websocket (mass request, zeroing, taring). The application can be basis for further development, done by adding of new components, and by use of extra commands presented in &bdquo;HY10 - JSON Data Exchange Interface&rdquo; manual.

M1 Mass Standard - knob weights. Nominal value - 2 kg.

Motic Panthera TEC-BD/DF/RL/TL Trinocular Upright Industrial Microscope, 6x4 Stage Objectives 5X, 10 (more)X, 20X, 50X CCIS BD Plan Achromatic &amp; S-Apo (Pb free) DIN (for Brightfield and Darkfield) Optical System Colour Corrected Infinity Optical System (CCIS) Illumination 3W LED Epi-Illumination Kohler Illumination 0.06W LED Features - Panthera TEC models include brilliant optics and smart functionality for extended ease of use. - Features Smart Darkfield with 5 Segment illumination mode. - New LD Plan Achromatic and S-Apochromatic BD objectives &amp; 22mm FOV eyepieces. - Pure incident or incident/ transmitted microscope stands available. - 3W LED of selectable color temperature for incident illumination. - Motic LightTracer: Coded nosepiece &amp; Digital light intensity knob. The Panthera TEC offers high value for the inspection of semiconductors and compound materials, especially in industrial quality control and technical education. Brightfield, Darkfield and Cross Polarization contrast are combined with a new, unique-to-Motic segmental illumination that all contribute to the versatility of this model. This concept allows an oblique incident illumination, perfect for the detection of scratches or other defects on flat and reflecting surfaces without a need to move the sample. BD models feature LD Plan BD objectives with a superb imaging performance, mounted on a 5-fold nosepiece. The light intensity for each objective position is automatically memorized and will be repeated once the objective is swung in again. The compact Epi illuminator carries a slot for polarizer and analyzer, ready for Polarization contrast and to reduce internal reflections. The illuminator also includes the controls for varying the incident light in terms of mode (BF or DF) and illumination angle.INCLUDED: The Motic Panthera TEC-BD/DF/RL/TL Trinocular Upright Industrial Microscope, 6x4 Stage includes: - 5X/0.13 (WD 17.3mm) - 10X/0.25 (WD 16.3mm) - 20X/0.40 (WD 7.3mm) - S-Apo 50X/0.80 (WD 1mm) - Dust Cover - Allen Key - Screws for Metal Extension Support - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz Refrigerant  (more) R290 Working Temperature Range -30°C - 150°C Cooling Capacity 450W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CD-450F refrigerated/heating circulator with an operating range of -30…+150 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incorporates easy change-over for control of fluid circulation internally or externally. The CORIO CD includes USB-B port for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 450W cooling power at 20 °C with 70W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty

IKA R 3003.2 Spiral stirrer Maximum Speed ≤ 800 RPM Flow Type Axial Flow Material Stainless Steel Fe (more)atures - Generates axial flow for efficient medium conveyance from the bottom upwards - Ideal for homogeneous mixing and heat exchange with medium to high viscosity media - Suitable for low to medium speed operations for precise control - Constructed from AISI 316L / 1.4571 stainless steel for superior durability and corrosion resistance - Operates within an ambient temperature range of 5 - 40 °C, versatile for different laboratory conditions This advanced stirrer is crafted to create an axial flow, moving the medium efficiently from the bottom upwards, perfect for mixing and facilitating heat exchange in medium to high viscosity media. Featuring a large 150 mm diameter and an 800 mm shaft, it is constructed from the robust AISI 316L / 1.4571 stainless steel, ensuring durability and resistance to corrosion. Designed to operate at low to medium speeds, it offers unparalleled control for a wide array of laboratory applications. With a height of 244 mm and weighing 1.045 kg, it’s optimized for stability and performance within a permissible ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3003.2 Spiral stirrer includes: - IKA R 3003.2 Spiral stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty