Grant Ecocool 150 Refrigerated Circulating Bath

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Memmert SV2945 Stirring device with support frame for 29 and 45 L models (requires special cover) Ne (more)w equipment in its original packaging Memmert reference: SV2945 Stirring device with support frame for 29 L and 45 L Memmert water and oil baths

IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator Working temperature Room Temp. to 100°C Capacit (more)y 18 L Temperature Stability DIN 12876 ±0.05 K Features - High-quality compact immersion circulator for efficient operation - PID temperature control for precise and reliable performance - LED displays for both working and safety temperature readings - Optical and acoustic warning functions for added safety - Adjustable safety circuit for secure temperature control - Sub-level protection ensures dependable operation - Lightweight design with compact dimensions for easy storage - Ready-to-connect packages simplify setup and use The IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator is a high-quality, compact solution for achieving precise temperature control in laboratory environments. With advanced PID temperature control, it delivers stability to ±0.05 K, ensuring reliable performance across a working range from room temperature to 100°C. The dual LED displays provide clear and convenient monitoring of both working and safety temperatures, while integrated optical and acoustic warnings enhance operational safety. The adjustable safety circuit, with a range up to 110°C, and sub-level protection ensure secure and dependable operation. Designed for efficiency and ease of use, the ICC 100 Lite Eco is compatible with 18 L baths, making it suitable for a wide range of laboratory applications. Its lightweight and compact design, with dimensions of 5.3 x 11.9 x 7.1 inches and a weight of 9.3 pounds, allows for easy integration into any setup. Built to comply with DIN 12876 standards, this circulator combines precision, safety, and reliability, making it a valuable addition to any laboratory workflow. INCLUDED: The IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator includes: - ICC 100 lite Compact Immersion Circulator - IB 18 eco Plastic Bath - BL.ICC Large Bridge - Screwdriver for Safety Circuit - Power Cord - Operators Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

Digital temperture control and selectable display of set and actual temperature PT100 sensor Timer 1 (more) to 99 min with audible alarm Overheating protection (even when bath is empty) Capacity: 16L Outer dimensions(w x d x h): 331mm x 396mm x 265mm Bath dimensions(w x d x h): 290mm × 300mm × 190mm Weight: 10kg Including rack with 36 spaces

Julabo FP50 Circulating Water Bath Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in excellent cosmetic condition and appears to have had little use.

Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Water Bath, and Selectable Glassware, 115V  (more)Speed Range 5 to 315 RPM Evaporation Capacity Up to 23 ml/min Pressure Setting Range 0 to 1013 hPa Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with vacuum controller and a slide jack mechanism for convenient height adjustment. Set includes the VR102S Vacuum Controller, BM302-A Water Bath, and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Water Bath, and Selectable Glassware, 115V includes: - Glassware Set Selected Above - VR102S Vacuum Regulator - BM302-A Water Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Sorvall H6000/HBB-6/HLR-6 5000rpm Swinging Bucket Rotor was removed from a university lab where (more) it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. It will need inspecting for safety before it is used again. It will require a locking stud as this is not included. P/N 11238 It has 6 x 1000ML Buckets. P/N 44040 The rotor is rated for 5000rpm Max.

Vacucell Evo 111 Double Compartment Vacuum Oven With Vacustation Lab This item was removed from a un (more)iversity where it was surplus to requirement. It is in excellent cosmetic condition and full working order. The previous client has stated that it was not used since its purchase in 2018. This item requires a Password for operation, which is available on request when purchased. Also includes the following: 1 x Vacuubrand Chemistry Hybrid RC 6 Pump- Full working order. 1 x Epson Printer- Full working order.

Micropipettes GILSON P5000 (1000-5000 microl). Sand supply CALIBRATED, sterilized and free of RNAsas (more).

Ohaus VXMTDG Multi-Tube Vortex Mixer, 120V Speed Range 600 rpm to 2,500 rpm Maximum Capacity 4.5 kg  (more)Duty Rating Continuous Features - Easily process up to 50 samples at one time - the Multi-Tube Vortex Mixer can be customized for your application with six different tube racks and a post extension kit. - The Multi-Tube Vortex Mixers feature either an easy to clean one-piece stainless steel housing that is perfect for clean rooms or a painted steel version for a more economical option. - For challenging samples, enhance vortex action and create a more vigorous mix with the programmable pulse mode on the digital models. Adjust the pulse-on/pulse-off time interval to customize operation. The Ohaus VXMTDG Multi-Tube Vortex Mixer, 120V is ideal for hands-free, high throughput sample processing. Includes stainless steel foam rack for 12mm tubes, and is compatible with interchangeable foam racks for vortexing of tubes from 10 to 29mm in diameter ensuing your laboratories varying vortexing requirements are met. Digital models offer exact speed control for applications that demand repeatable results. INCLUDED: The Ohaus VXMTDG Multi-Tube Vortex Mixer, 120V includes: - Stainless steel foam rack for (50) 12 mm diameter tubes - Detachable 3-wire cord and plug - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 31 x 10ml insert for Z496-1000-RBUK 2/pk The Hermle 31 x 10ml insert is a specialized accesso (more)ry designed for use with the Hermle Z496-1000-RBUK rectangular buckets. This insert comes in a pack of 2 and is capable of accommodating up to 31 tubes with a maximum diameter of 16mm and length of 120mm. With a maximum capacity of 10ml per adapter, this insert is ideal for processing small sample volumes. The compatibility with Hermle Z496-1000-RBUK rectangular buckets makes this insert a versatile addition to any laboratory looking to improve their sample processing workflow. The use of this insert ensures that tubes are securely held in place during centrifugation, preventing any sample loss or contamination. INCLUDED: The Hermle 31 x 10ml insert for Z496-1000-RBUK 2/pk includes: - Set of 2 Adapters - Manufacturer's Documentation - 2 Year Manufacturer's Warranty