Bunsen Burner

Laboratory tap with gas base Straight wall feeder with base For technical gases, inert gases (nitrog (more)en), air (no burning gases).

Spinning top lift BOY 08 510.00 PROLABO 20 x 20 cm Lifting support, lifting table for laboratory Tab (more)letop dimensions: 200 x 200 mm With traces of wear

ÄKTAxpress is a liquid chromatography system intended for automated, multi steppurification processe (more)s. The system has been developed and optimized for purificationof Histidine-tagged and Glutathione S-Transferase (GST)-tagged recombinant proteins from clarified or crude cell lysates. ÄKTAxpress supports a number of purification protocols containing up to four chromatography steps, for example, affinity chromatography followed by desalting, ion exchange, and gel filtration. Protocols for purification of both low expressed proteins and well expressed proteins are included. Also protocols supporting purification of double tagged proteins and protocols that can be combined with on-column and off-line (batch) tag cleavage are provided. ÄKTAxpress provides the following features: •Automatic purification of up to four samples in a single run. •Purification protocols containing up to four chromatography steps. •Automated on-column affinity tag removal in the first step of purification protocols starting with an affinity/ion exchange chromatography step. •Purification protocols supporting purification of both well expressed and low expressed proteins, double tagged proteins and proteins that have been cleaved off-line. •Up to 50 mg of protein can be purified per sample. •Up to twelve ÄKTAxpress systems can be run in parallel, controlled from one computer (not included). Different purification protocols can be run simultaneously. •The systems can be placed next to each other or they can stand separately if preferred. Flow rate: 0.1 – 65 mL/min Flow rate accuracy: ±2% or ±0.02 ml/min whichever is greater Flow rate reprocibility: RSD < 0.5% Pressure range: 0 – 30 bar Step gradients (quasi-isocratic mixing) formation conditions: Water based buffers with different concentrations of salts Gradient mmix proportions: 5 – 95% Concentration accuracy: ±2%B Linear gradients conditions: Water based buffers with different concentrations of salts Linearity: ±2%B within 20 – 80%B UV monitor wavelengths: 280 and 254 nm set by lamp position and filter Optical path length: 2 nm Opitcal cell volume: 2 µL Detector cell volume: 30 µL Absorbance range: 0.01 – 5 AU Auto zero range: -0.2 – 2.0 AU Linearity, deviation: < 3% up to 2 AU Static noise, short and long term: < 40 μAU Static drift: ±0.1 mAU/h Conductivity range: 0.01 – 300.00 mS/cm Accuracy: Max. ±2% of full scale calibrated range or ±0.1 mS/cm whichever is greater Reproducibility, short and long term: Max. ±1% or ±5 μS/cm whichever is greater Noise: Max. ±0.5% of full scale calibrated range, typically ±0.1% Response time: Max. 4 s (0–95% of step) Internal volume: 24 μl Dimensions (WxdxH): 250 x 490 x 660 mm Weight: 30 kg

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R &ndash; resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR &ndash; infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C &ndash; capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

IKA DB 4.2 Round Bottom Tubes Dry Block (10 mm)

This listing is for a Infors HT Labfors 3 Bioreactor.The unit is in full working condition and is re (more)ady for immediate release.This unit is supplied with accessories and manuals.The Infors HT Labfors 3 Bioreactor is the ultimate bench top solution for precise bio-processing, offering unparalleled flexibility and control for various applications, including the cultivation of mammalian and insect cells. With a working volume capacity ranging from 0.5L to 10L, this bioreactor is designed to adapt to your research needs, ensuring optimal growth conditions.Key Benefits:Comprehensive Control: Monitor and adjust critical parameters such as stirrer speed, temperature, pH, pO2, antifoam levels, and gas mixtures with ease for precise bio-process management.Tailored Gas Mixing: The open frame gas mix system allows for customisable gas compositions at every stage, utilizing rota-meters and mass flow control valves for accurate monitoring.Balance-Regulated Feeding: Substrate feeding by weight can be seamlessly managed using Iris Process-Control, ensuring consistent nutrient delivery.Versatile Connectivity: Connect external measurement and control systems effortlessly through integrated analogue inputs/outputs, accommodating up to 4 analogue inputs and 6 analogue outputs.User-Friendly Interface: The intuitive X-DDC controller features easy navigation with tabs and a rotary knob, making it accessible for both novice and experienced users.Specifications:Vessel Size: 0.5L to 10LTotal Volume: Up to 13LSpace-Saving Design: Smallest footprint with maximum functionalityMulti-Fermenter Capability: Easily upgrade-able for multi-fermenter operation with a single panel

IKA Fisher Brand Color Squid Magnetic Stirrer model: Color Squid Technical characteristics: 100 – 24 (more)0 V, 4 W. Continuously adjustable speed: 0 to 1500 rpm. Tray dimensions (ø): 11 cm External dimensions (D)x(H)x(W): 130 x 135 x 50 mm Stirring capacity: 0.8 liters (H2O) Weight: 1kg

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a universit (more)y lab where it was surplus to requirements. The system is in good cosmetic condition with marks from use. All modules power up. We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes. The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working. The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal. We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts. The system is made up of the following; 1 x Matrix Hydra IICat no. 109610 1 x Matrix 2 Position Stage 1 x Apogent Discoveries Matix Hydro Pump ModuleThe unit powers on with all 3 Fills working. 1 x Matrix P1 Control Box 1 x Innovadyne 1-Channel NanofillThe unit powers up. 1 x Grant Instruments Type MS1The unit powers up. Dell Laptop with Microsoft MouseModel - PP04XHydra II-Plus-One Control Software Version 3.1.3 InstalledThe unit powers up and the software runs. Software Discs:Matrix Hydra II-Plus-One Control Software Version 3.1.3Matrix Hydra II-Plus-One Control Software Version 3.1.2SuperLogics LE Software Suite Rev 2.92 x Socket Installation discs Various tubing and accessoriesOperating instructions

Thermo Scientific Hematocrit Fixed Angle Rotor Cat. #: 75003473 The Thermo Scientific Hematocrit Fix (more)ed Angle Rotor Cat. #: 75003473 is brand new and designed for use with Thermo Sorvall Legend Micro 17/17R/21/21R, Pico and Fresco 17/21, MicroCL 17/17R/21/21R Series Centrifuges. This hematocrit rotor supports speeds up to 14,800 RPM and RCF up to 16,800 x g, with a maximum capacity of 24 capillary tubes. INCLUDED: The Thermo Scientific Hematocrit Fixed Angle Rotor Cat. #: 75003473 Swing Bucket Rotor includes: - 1 Year Full Parts and Labor Warranty Thermo Scientific Hematocrit Fixed Angle Rotor Cat. #: 75003473 SpecificationsMaximum Speed14,800 RPMMaximum RCF16,800 x gMaximum Capacity24 Capillary TubesMaximum Radius8.5 cmCentrifuge CompatibilityThermo Sorvall Legend Micro 17/17R/21/21R, Pico and Fresco 17/21, MicroCL 17/17R/21/21R Series Centrifuges