Weighing Table

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ASSIST offers unparalleled pipetting ergonomics. By attaching a VIAFLO electronic pipette to ASSIST, (more) the pipette’s protocols can be performed automatically. It reduces manual pipetting to the minimum, relieving lab personnel from repetitive motions that may cause repetitive stress injuries. Manual pipetting requires practice to achieve reproducible pipetting results. Typical parameters influencing the performance are tip immersion depth and pipetting angle. The automated pipetting capability of ASSIST ensures these parameters are always the same, resulting in an increased reproducibility. Channels: 8-, 12-, and 16- multichannel VIAFLO pipettes Volume: 0.5 µL to 1250 µL Applications: Serial dilutions, Plate filling, Reagent additions, Liquid handling, Automated multichannel pipetting Capacity: 6-well to 384-well plates Type: Air displacement Dimensions (WxDxH): 340 x 360 x 400 mm Weight: 10 kg

Syncore is easy to use, allowing you to perform parallel evaporation with minimal supervision, freei (more)ng your time for other tasks. Process automation ensures the highest analytical precision and safety standards of our synchronized sample solutions. Rotation speed range: 60 – 400 rpm Temperature range: 20 – 100°C Temperature accuracy at 100°C: ±1°C Block capacity: 24 x 60 ml Dimensions (WxDxH): 500 x 520 x 325 mm Weight: 30 kg

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Stuart Model: Flask Shaker / SF1 with two side arms and four clamps P/N: SF1 S/N: R000 (more)101320 Description: Valuable time can be taken up mixing bottles and flasks by hand. Let the SF1 take the strain! Holding up to eight flasks or bottles, up to 500ml capacity, it creates a vigorous mixing action by simulating hand shaking. It is especially useful for applications where prolonged shaking is required as it can be left on continuously and won't get tired! Robust construction, mounted on four rubber feet to absorb vibration and prevent unnecessary movement on the bench. Analogue timer covers 10 to 60 minutes with a manual override. Electronic feed-back control ensures a constant speed irrespective of load. Supplied with two side arms and four clamps. It The nummer of additinal clamps increases the capacity to twelve bottles or flasks. Features: - Vigorous shaking action- Timed operation or continuous running- Robust construction- Ideal for extractions Specifications: - Electrical supply: 230 V 50 Hz 50 W- Fuses: T3.15A Items delivered: - Stuart Flask Shaker / SF1- Instruction Manual as PDF via E-Mail request Condition: This flask shaker is in very good cosmetic as well as operating condition. It is 100% functional tested and ready to be used.

Muffle furnace Selecta SELECT HORN. Chamber capacity 9 L. Adjustable temperature up to 1150 °C. Accu (more)racy ±1 °C. Resolution: 1 digit. Digital electronic temperature and time controller that allows programming a ramp of up to 8 segments or two of 4 segments. Heating elements evenly distributed. Fiber-ceramic insulation. Up-and-over door with disconnection of operation in opening. It has some flaws in the paint that do not prevent its operation. Dimensions: inside 15*20*30 cm, outside 58*59*65 cm; 70KG. 3000 W. User manual. The Selecta Select-Horn electronic muffle furnace has an interior enclosure made up of high-quality refractory plates and evenly distributed heating elements with special long-lasting high-melting point wire. Excellent thermal insulation and reduced consumption. Quick temperature recovery when opening and closing the hinged door.

Ohaus 30400186 Modular Heat Block, 9 x 21 mm Vials The Ohaus 30400186 Modular Heat Block, 9 x 21 mm  (more)Vials is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400186 Modular Heat Block, 9 x 21 mm Vials includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty