IKA Rocker 2D Digital Schütter Shaker 5 - 80 rpm 0 - 15° (Angle/Winkel)

Metrohm 682 Titroprocessor . Titroprocessor from Metrohm, model 682 with integrated printer. Technic (more)al specifications: 220 V, 50 Hz, 120 VA. External dimensions (DxWxH): 46 x 15 x 36 cm. Suitable for endpoint titration, Karl Fischer titrations and equivalency titrations.

Labconco RapidVap N2/48 Evaporation SystemRapidVapN2/48 Evaporation Systems use nitrogen blow down,  (more)vortex motion and heat tospeed evaporation of up to 48 small samples or eight 450 milliliter samples atonce. A stream of nitrogen or dry gas is directed downward onto the surface ofthe sample. Nitrogen blow down reduces the partial pressure directly over theliquid to speed evaporation and help remove the solvent as it evaporates. TheseSystems may be used to prepare samples for applications such as drug developmentand metabolism, bioresearch, combinatorial chemistry, environmental testing,forensics and toxicology. There are eight clusters of six ports each. Nitrogen may be delivered to 2, 4,6 or 8 clusters at once so that nitrogen is conserved when a full load is notrequired. Microprocessor-controlled vortex motion increases surface area forfaster evaporation while continually mixing the sample to maximize recovery.Utilizing a dry block heating method, RapidVap N2/48 Systems provide a morereliable alternative to maintenance-intensive, contamination-prone water baths.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose (6 ft.) - Clamp - Manifold Guide x 3 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph 036110238 Hei-PLATE Mix 'n' Heat Ultimate Basic Sensor Package, 145mm Plate Temperature Ran (more)ge 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system Heidolph 036110229 Hei-PLATE Mix 'n' Heat Ultimate Basic Sensor Package, 145 mm Plate is equipped with numerous interfaces for automated laboratory processes. The RS232 and USB B ports allow a control via our integrated Hei-PROCESS solution. You can actually integrate your device in our Hei-CONTROL Pro software via the LAN interface. As of the middle of 2024, the LAN interface will additionally support the communication protocol OPC UA. The USB A interface at the front allows data logging via a USB stick. For more comfort and safety, you can connect the magnetic stirrer with the electric Heidolph lab jack via the USB C interface. There are three heating modes for temperature control: FAST for a quick heating, as well as PRECISE and PRECISE+ for the exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 and the double sensor Pt1000 that allows the simultaneous measurement in your sample and in the bath liquid. The possibility to program ramps and to create individual profiles, increases the precision and reproducibility of your experiments. For the stirring speed, there is a three-stage setting (start-up behavior). For mixing your sample optimally, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. This magnetic stirrer offers all relevant safety features. The large safety distance between the heating plate and the control panel as well as the visual residual heat indicator at temperatures 50 °C protect against burns. The patented Kera-Disk® plate made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 145 mm. This unique size makes it suitable for the use with many accessories and samples on a small footprint. The material used also enables the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110238 Hei-PLATE Mix 'n' Heat Ultimate Basic Sensor Package, 145mm Plate includes: - Magnetic stirrer Hei-PLATE Mix'n'Heat Ultimate (145 mm diameter) - Pt1000 temperature sensor - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

15 stirring positions, 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept  (more)for powerful mixing of solutions, power reserves up to 3,000 ml per stirring point, 100% synchronized speeds, jerk-free stirring even at low speeds. Fully encapsulated and hermetically sealed stainless steel housing, IP68, water-, dust-, and germproof, extremely robust construction and performance, easy to clean and maximum resistance, submersible in water- resp. oil baths, suitable for the use in CO2-incubators and ovens. Stirring points: 15 Stirring point distance: 65 mm Stirring volume/stirring point: 1 – 3000 ml Speed range: 100 – 1,600 rpm Stirring power (max.): 40 W Material housing: Stainless steel Permitted operation conditions HT-version:  up to +200°C in air, up to +95°C in water submerged Dimensions (WxDxH): 245 x 375 x 38 mm Weight: 9.5 kg

Battenfield Microsystem 50 Injection Moulding Machine This was removed from a university workshop wh (more)ere it was surplus to requirements. The unit was not tested on our site, but the lab confirmed it was in working order prior to removal. It is in good cosmetic condition with minor marks.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Ohaus 30400194 Modular Combination Heat Block, 0.5 mL, 1.5 mL, 2 mL Tubes The Ohaus 30400194 Modular (more) Combination Heat Block, 0.5 mL, 1.5 mL, 2 mL Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400194 Modular Combination Heat Block, 0.5 mL, 1.5 mL, 2 mL Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036300460 Overhead Stirrer Impeller, BR 18 Half-Moon Our half-moon impeller is specially de (more)signed for use in round-bottom flasks with NS 29/32 or larger. Combined with the vacuum-tight PTFE stirrer guide, you get a completely tight reaction system. The half-moon impeller HR 18 works best up to 1,700 ml. The half-moon impeller consists of a PTFE blade and a PTFE-coated stainless-steel shaft. The stainless-steel core ensures the stability of the stirrer shaft and secure attachment in the overhead stirrer without the risk of breakage of conventional glass stirrer shafts. The diameter in the clamping area is 6.5 mm; the stirrer shaft with the thick-walled PTFE coating has a diameter of 8 mm. Due to its anti-adhesive property (non-stick coating), the half-moon impeller is easy to clean and can be used up to a maximum application temperature of 250°C. INCLUDED: The Heidolph 036300460 Overhead Stirrer Impeller, BR 18 Half-Moon includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW