Thermo Scientific MPT Holder 75003625 for M20 Rotor 75003624 Set of 2

Hersteller: Beckman Coulter Modell: J-26S XP BioSafe Three-Phase Beschreibung: Das J-26S X setzt Maß (more)stäbe in Sachen Leistung, einschließlich hoher Geschwindigkeit, geringer Wärmeabgabe, Unwuchttoleranz und niedrigem Geräuschpegel, und sein breites Spektrum an Trennmöglichkeiten wird noch erweitert, jetzt auch mit dreiphasiger Filtration, die das Schleusenmaterial noch weiter in Feststoffe, Flüssigkeiten und Gase trennt. Der zusätzliche HEPA-Filtersatz (High Efficiency Particle Arrestance) macht das Gerät bio-sicher. Die Zentrifuge J-26S XP verfügt über einen schlagfesteren Deckel, eine vollständige Containment-Barriere und eine automatische Rotorerkennung. Das ergonomische Design - mit niedrigerer Gerätehöhe und freihändiger Türbedienung - bleibt unverändert. Die J-265 XP kann sechs Liter Fermentorleistung in weniger als 10 Minuten verarbeiten, eine subzelluläre Fraktion bei 82.000 x g liefern und 24 Mikrotiterplatten gleichzeitig betreiben. Das Gerät erkennt automatisch, welcher Rotor installiert ist, und verhindert, dass der Rotor seine maximale Drehzahl überschreitet. Es ermöglicht einen schnelleren, leiseren und energieeffizienteren Betrieb mit besserer Temperaturkontrolle. Der exklusive, drehmomentstarke SR-Antrieb (Switched Reluctance) verkürzt die Zykluszeiten. Kernmerkmale: • Verarbeitung von sechs Litern Fermenterleistung in weniger als 10 Minuten • Lieferung einer subzellulären Fraktion bei 82.000 x g • 24 Mikrotiterplatten auf einmal ausführen • Trennen Sie lebende Zellpopulationen mit Elutriation • Sterilfilter verhindern den Austritt von infektiösem Material Technische Daten: Maximale Geschwindigkeit: 26,000 rpm Beschleunigung: Maximal, langsam oder zeitgesteuert (1-10 Minuten, 0-500 U/min) Abbremsung: Maximal, Langsam, Zeitgesteuert (1-10 Minuten von 500-0 U/min) oder Aus Maximale Kapazität Volumenbereich: 1 - 6 L Kältesystem: FCKW-freies, nicht Ozon abbauendes Kältemittel Temperaturbereich(e): 10°C - 40°C in 1-Grad-Schritten Gewicht: 290kg Maße (B x H x T): 71cm x 86cm x 86cm Leistungsanforderungen: 220/380 VAC, 50 Hz, 3 Phasen Luftfeuchtigkeitsbeschränkungen:< 95% (nicht kondensierend) Lieferumfang: - J-26S XP BioSafe Three-Phase ohne Rotor - Bedienungsanleitung als PDF via E-Mail Bei Bedarf eines passenden Roters, helfen wir gerne! Das Gerät befindet sich in einem absoluten Top Zustand und wurde 100%  auf Funktion geprüft.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Samples and applications - Preparation of spreadable creams and soluble powders (tea, coffee, milk)  (more)- Preparation of pharmaceutical ointments and creams - Suspensions/emulsions for infusion/injection - Preparation of soap, shampoo, and conditioner; preparation of cosmetic lotions - Water analysis - Preparation of pigments, inks, and paints - Preparation of liquid crystals for displays - Preparation of biodiesel TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

BioStar™ 50 bioburden test system is an easy to use,compact system, specially designed for using dis (more)posable funnels for microbial load testing. This system obviates the need of separate vacuum sources and manifolds, and minimizes the required work space and arrangement time.The pump can be operated touch free with a motion sensor which offers the microbiologist increased convenience and flexibility in sample filtration. The long battery run time ensures convenient use without power supply as well. The clear silicone drainage tubing is highly user friendly.Touch free operationCompact, portable battery operatedAutoclavable SS 316L funnel adapterEasy filtrate drainageLED light indication- Green/Red/Orange for ON/OFF and battery charging respectivelyWeight 1KGDimensions - 21cmL x 20cmW x 25cmH

Laboport SD N 860.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automat (more)ic condensate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 60 l / min Final vacuum (max.) 4 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Centrifugal concentration Distillation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Macherey Nagel PF-11 photometer. Portable photometer for field and laboratory use. For the evaluatio (more)n of VISOCOLOR and VISOCOLOR ECO kits and tests in NANOCOLOR cuvettes. Direct reading in mg/L. Extinction measurement. Cuvette lock for 16 mm round tubes. Easy to use. Photometric pH measurement. Manual wavelength adjustment: 380/405/470/520/605/720 nm. Light source: Tungsten lamp. Powered by four batteries. Suitcase. User manual. The Macherey Nagel PF-11 photometer is designed and built to provide accurate and reliable results. It is recognized and appreciated by experienced analysts who appreciate its easy-to-use and time-saving approach with step-by-step instructions.

HR070-CMT 0.70X High Resolution C-Mount Adapter with Z clamp ZEISS Diganostic Instruments For Micros (more)cope The ZN Clamp is compatible with the following Zeiss microscope models: Axiophot Zxioplan Axioskop