Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace
Analytics
Brand
Beckman Coulter
Location
Potsdam - Germany
Price
€14,000.00 
(€16,660.00 incl. VAT*)*if applicable
This item is
for sale
State of item
used
Shipping information

Shipping weight: 400,00 kg

Categories

Beckman Coulter J-26 S XP High Speed Centrifuge Zentrifuge 26.000rpm 6L (2013)

€14,000.00 
(€16,660.00 incl. VAT* )* - if applicable
item image

Description from the supplier

Manufacturer: Beckman Coulter


Model: J-26S XP BioSafe Three-Phase

Description:

The J-26S X sets the standard for performance, including high speed, low heat dissipation, imbalance tolerance and low noise level, and its wide range of separation capabilities is extended even further, now including three-phase filtration that further separates airlock material into solids, liquids and gases. The addition of a High Efficiency Particle Arrestance (HEPA) filter set makes the unit bio-safe. The J-26S XP centrifuge features a more impact-resistant lid, full containment barrier and automatic rotor detection. The ergonomic design - with lower unit height and hands-free door operation - remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g, and run 24 microplates simultaneously. The unit automatically detects which rotor is installed and prevents the rotor from exceeding its maximum speed. It enables faster, quieter and more energy-efficient operation with better temperature control. The exclusive, high-torque SR (Switched Reluctance) drive reduces cycle times.

Core features:

  • Processing six liters of digester output in less than 10 minutes.
  • Deliver a subcellular fraction at 82,000 x g
  • Run 24 microplates at once
  • Separate live cell populations with elutriation
  • Sterile filters prevent the escape of infectious material

Specifications:

Maximum speed: 26,000 rpm
Acceleration: Maximum, slow or timed (1-10 minutes, 0-500 rpm).
Deceleration: Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off
Maximum capacity volume range: 1 - 6 L
Refrigeration system: CFC-free, non-ozone depleting refrigerant
Temperature range(s): 10°C - 40°C in 1 degree increments
Weight: 290kg
Dimensions (W x H x D): 71cm x 86cm x 86cm
Power requirements: 220/380 VAC, 50 Hz, 3 phases
Humidity restrictions:< 95% (non-condensing)

Scope of delivery:

  • J-26S XP BioSafe Three-Phase without rotor
  • Instruction manual as PDF via e-mail

If you need a suitable rotor, we are happy to help!

The unit is in absolute top condition and has been 100% function tested.

About QuestPair

QuestPair is a platform to find and acquire laboratory equipment by connecting research organisations, universities, and companies with high-quality, affordable instruments. The platform facilitates multiple sales daily worldwide and works with partners around the globe to provide trusted, vetted products for a wide variety of scientific needs. Our in-house developed AI algorithms collect data on the usage and availability of scientific instruments, enabling us to provide tailor-made assistance in sourcing suitable laboratory equipment. With a focus on cost-effectiveness and sustainability, QuestPair has an excellent track record in streamlining acquisitions for laboratories to further scientific research and development.

Related items:
Heraeus Biofuge 13 centrifuge 1991-cover
Heraeus Biofuge 13 centrifuge 1991

The Heraeus Biofuge 13 centrifuge is a bit like a classic car: it may be old, but it still has plent (more)y of life left in it! Despite its age, this centrifuge is still super useful and remains a beloved tool for many researchers and technicians. Sure, it may not have all the bells and whistles of some of the newer models, but the Biofuge 13 is a classic that gets the job done. It's like the lab equivalent of an old pickup truck: not the fanciest thing on the block, but it's reliable and it's been around the block a few times. One of the best things about the Biofuge 13 is its versatility. It's like a Swiss Army knife of centrifuges: it can handle a wide range of samples and applications, from DNA isolation to protein purification. And despite being a bit of an old-timer, it's still got some serious speed, reaching up to 13,000 RPM to ensure efficient separation of samples. Now, of course, some people might say that the Biofuge 13 is a bit...well, dated. But we like to think of it as a classic that never goes out of style. It's like a lab version of a vintage vinyl record: it may be a bit scratchy, but it's still got that warm, authentic sound that you just can't replicate with a digital file. And let's not forget about the cost savings! The Biofuge 13 may be a bit long in the tooth, but it's still an affordable option for labs with limited budgets. It's like finding a classic car at a garage sale: sure, it might need a bit of work, but you can't beat the price. In conclusion, the Heraeus Biofuge 13 centrifuge is a bit like a fine wine or a classic rock band: it only gets better with age. Despite being an older model, it remains a valuable tool for many labs, thanks to its versatility, reliability, and affordability. So let's raise a glass (or a test tube) to the Biofuge 13 and all the other classic lab instruments that continue to get the job done!

€350.00 ex VAT
Netherlands
benchtop centrifuges, centrifuges
Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor-cover
Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor

This listing is for a Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor. The unit is in full w (more)orking condition and is ready for immediate release. The Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor is a versatile and high-performance laboratory tool suitable for a wide range of applications. Here’s an organized overview of its key features, specifications, and applications: Key Features and Specifications Design and Capacity: Holds up to 8 tubes Capacity of 50 mL per tube Material: Constructed from lightweight, corrosion-resistant materials such as carbon fibre and aluminium Configuration: Fixed-angle design, with tubes positioned at a constant angle relative to the axis of rotation Compatibility: Works with various Thermo Scientific centrifuges, including: Heraeus Megafuge series Sorvall Legend series Safety Features: Automatic rotor recognition system Lid-locking mechanism to prevent accidental opening during operation Performance: Maximum speed: 21,000 rpm Maximum RCF: 52,400 x g Weight: Net weight of the rotor: 9.9 lb (4.49 kg) Biocontainment: Features a bioseal lid to ensure samples remain contained and to protect users from hazardous chemicals Environmental Considerations: Energy-efficient design with reduced waste production Key Applications The FiberLite F21-8x50y Centrifuge Rotor is ideal for various laboratory procedures, including: Subcellular Separations: Isolating cellular components for research and analysis. Bacteria Pelleting: Concentrating bacterial cultures for further experiments. Lysate Clarification: Removing debris from cell lysates to obtain clear samples. Cell Membrane Studies: Analyzing the properties and functions of cell membranes. Sucrose Gradient Isolation: Mitochondria Endoplasmic reticulum Gradient separation of cells using solutions like Percoll, Ficoll, Optiprep, or Nycodenz This rotor combines advanced technology with practical safety and efficiency features, making it suitable for a variety of applications in research, clinical, and industrial laboratories.

£250.00 ex VAT
United Kingdom
centrifuge rotors or parts, centrifuges
People are watching right now:
Disclaimer: QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is“ basis with no guarantees of completeness, accuracy, usefulness or timeliness.

Customer Service

Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.

We are available to assist you Mon-Fri, 10am - 5pm CET.

+31 (0) 73 7114717
[email protected]