S+B 3 Drawer cabinet low Ice blue 600

Labconco CentriVap 12-13 mm Acid-Resistant Rotor Hexagonal rotor holds up to 132 1.5mL to 2.0mL  (more)microcentrifuge tubes 12-17mm rotor holds up to 52 2mL to 10mL tubes or up to 24 11mL to 19mL tubes 12-13mm rotor holds up to 40 1.5mL to 2mL microcentrifuge tubes or up to 108 3mL to 10mL tubes 28mm rotor holds up to 32 1.5 to 2mL microcentrifuge tubes or up to 12 40-50mL tubes Microtiter plate holds four each standard two deep-well plates DNA rotor holds up to 72 0.5mL microcentrifuge tubes or 60 1.5 to 2mL microcentrifuge tubes INCLUDED: The Labconco 7455101 CentriVap 12-13 mm Acid-Resistant Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND MD 1C +AK+EK Chemistry Vacuum System Ultimate Vacuum 2 mbar Max. pumping speed at 60 Hz (more) 0.88 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors. This system is usable for increased vacuum requirements with high boiling solvents and often replaces rotary vane pumps. Typical applications are rotary evaporators and vacuum drying ovens. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment.INCLUDED: The VACUUBRAND MD 1C +AK+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Maximum Capacity: 60 kg Readability: 10 g Platform Size: 355 x 305 mm Communication: RS232 Dimension (more)s (HxDxW): 572 x 472 x 305 mm Weight: 15 kg

ÄKTAxpress is a liquid chromatography system intended for automated, multi steppurification processe (more)s. The system has been developed and optimized for purificationof Histidine-tagged and Glutathione S-Transferase (GST)-tagged recombinant proteins from clarified or crude cell lysates. ÄKTAxpress supports a number of purification protocols containing up to four chromatography steps, for example, affinity chromatography followed by desalting, ion exchange, and gel filtration. Protocols for purification of both low expressed proteins and well expressed proteins are included. Also protocols supporting purification of double tagged proteins and protocols that can be combined with on-column and off-line (batch) tag cleavage are provided. ÄKTAxpress provides the following features: •Automatic purification of up to four samples in a single run. •Purification protocols containing up to four chromatography steps. •Automated on-column affinity tag removal in the first step of purification protocols starting with an affinity/ion exchange chromatography step. •Purification protocols supporting purification of both well expressed and low expressed proteins, double tagged proteins and proteins that have been cleaved off-line. •Up to 50 mg of protein can be purified per sample. •Up to twelve ÄKTAxpress systems can be run in parallel, controlled from one computer (not included). Different purification protocols can be run simultaneously. •The systems can be placed next to each other or they can stand separately if preferred. Flow rate: 0.1 – 65 mL/min Flow rate accuracy: ±2% or ±0.02 ml/min whichever is greater Flow rate reprocibility: RSD < 0.5% Pressure range: 0 – 30 bar Step gradients (quasi-isocratic mixing) formation conditions: Water based buffers with different concentrations of salts Gradient mmix proportions: 5 – 95% Concentration accuracy: ±2%B Linear gradients conditions: Water based buffers with different concentrations of salts Linearity: ±2%B within 20 – 80%B UV monitor wavelengths: 280 and 254 nm set by lamp position and filter Optical path length: 2 nm Opitcal cell volume: 2 µL Detector cell volume: 30 µL Absorbance range: 0.01 – 5 AU Auto zero range: -0.2 – 2.0 AU Linearity, deviation: < 3% up to 2 AU Static noise, short and long term: < 40 μAU Static drift: ±0.1 mAU/h Conductivity range: 0.01 – 300.00 mS/cm Accuracy: Max. ±2% of full scale calibrated range or ±0.1 mS/cm whichever is greater Reproducibility, short and long term: Max. ±1% or ±5 μS/cm whichever is greater Noise: Max. ±0.5% of full scale calibrated range, typically ±0.1% Response time: Max. 4 s (0–95% of step) Internal volume: 24 μl Dimensions (WxdxH): 250 x 490 x 660 mm Weight: 30 kg

Sample preparation stirrer OHAUS Guardian 7000 Magnetic Hotplate Stirrers are designed with exceptio (more)nal safety features and top performance for every application. All models feature the unique SafetyHeatTM, an industry-leading internal protection system that ensures safety in heating applications through dual system integrity monitoring. The bright LCD display features intuitive icons, temperature, speed and duration settings, all designed to monitor performance from every corner of the lab. Numerous cutting-edge Ohaus features: - SmartHousing ™: Innovative chemical resistant, easy to clean design that allows you to channel potential spilt liquid samples away from internal components and the glass control panel. - SmartPresence ™ and SmartLink ™: they automatically turn off the heater if no user is detected after the 'time out' period set by the user or if the bluetooth no longer detects any smartphone connected. - SafetyHeat ™: two independent safety controls constantly monitor the electronics and turn off the heating to prevent overheating. - Powerful Motor: A solid magnet and software-controlled ramp speed ensure stirring accuracy from 60 to 1,600 rpm. for secure magnetic coupling for viscous applications. - SmartHeat ™ and SmartRate ™: set the maximum unit temperature and rapid or slow rates of temperature and speed change. The scheduling function allows the storage of five multi-stage programs. Available models: E-G71HS07C model with small square plate: 178 x 178 mm; flow rate of 15 litres; ceramic plate; heating up to 500°C. E-G71HS10C model with large square plate: 254 x 254 mm; flow rate of 18 litres; ceramic plate; heating up to 500°C. e-G71HSRDM model with round plate: 135Ø mm; flow rate of 20 litres; aluminium plate; heating up to 380°C. Applications Thermosensitive chemistry and biology, heat fixation, solution pH optimization, solution sterilization, endothermic reactions, denaturation of organic material, preparation of samples and solutions, buffers and solubilization reagents, preparation media, boiling Display Backlit LCD display for temperature, speed and time, green indicator lights during the heating and shaking phases, hob over-temperature indicator, icons for SmartRateTM, SmartHeatTM, SmartPresenceTM, SmartLinkTM, probe in use and Adjustment of a single point Operation and accessories included Mains cable (included), 20.3 cm (8 ') stainless steel RTD temperature probe, 3.8 cm (1.5') PTFE coated stir bar, protective hood in use Communication The USB port can be used to program repetitive applications and increase safety thanks to SmartLinkTM technology; the long-range user detection function operated via the OHAUS Bluetooth dongle accessory (sold separately) Structure Probe connection, SmartHousingTM is heat insulated and chemical resistant, IP21 rated, tempered glass front panel, control knobs, On / Off switch to disconnect the heater, integrated support rod holder, ceramic plate or in aluminium easy to clean Construction features Temperature indicator light, audible alarm, SmartHeatTM temperature limitation function, SafetyHeatTM stops the heater in the event of a malfunction, temperature calibration function for five probes and five plate setpoints, temperature priority function, SmartRateTM functions

Purite Select Purification System L300150 with Storage Tank This was removed from a university lab w (more)here it was surplus to requirements. The system powers up and pressurises but was not tested further. It is in reasonable cosmetic condition with marks from use. Both filters, Pretreat 8 and Puripac PP8 expired 15/02/23 100L Storage Tank

The AK-5/100 STENT automatic balance for stents operates with the readability of d = 0.1 &mu;g. The  (more)device features a special working mode which makes it possible to analyse the change in sample mass during the technological process. Automatic Operation Automation of the weighing cycle, thanks to the elimination of an error being a result of the human factor, is a guarantee of measurement repeatability and accuracy impossible to be obtained in the case of manual weighing. Stent Container Automatic balance for stents, the AK-5/100 STENT, enables users to create identical test conditions for the entire stent series. With use of the stent container, the user can weight a series of 5 stents maximum, one by one, thus the necessity to place one stent on the pan each time is avoided. Accessories for Stent Weighing Weighing pan of custom design allows convenient weighing of 40 mm stents with a diameter of even 20 mm. A special applicator facilitates stent loading. Spacious Chamber and Ease of Operation In the weighing chamber there are perfect conditions necessary to enable highly precise weighing. The spacious chamber makes loading of the weighing pan with stents comfortable and uncomplicated. Measurement of Ambient Conditions in the Weighing Chamber The automatic balance for stent weighing, AK-5/100 STENT, is equipped with a high-class thermo-hygro-barometer allowing to test ambient conditions in real time with the accuracy of: &plusmn; 1 hPa (pressure) / &plusmn; 1.8% (humidity) / &plusmn; 0.1 &deg;C (temperature).

PS X2.M is a series of advanced-class precision balances of high resolution based on RADWAG MonoBLOC (more)K technology. The innovative construction of PS X2.M balance features a new single-point weighing pan fastening, which ensures its excellent geometry and minimizes eccentricity error. The labyrinth-shape fastening guarantees excellent resistance to contamination. Weighing module RADWAG MonoBLOCK technology enables weighing loads with the readability of d=0.01 g at the maximum capacity of 10 kg. Rigid base ensures stability of the weighing system and great resistance to shocks. Internal adjustment system means precision and high measurement repeatability. Leverage of internal weight mass enables adjustment within the whole measuring range. Features: d=0.01 g readability at 10 kg max capacity great resistance to ambient conditions stability and repeatability over time RADWAG MonoBLOCK technology internal adjustment within the whole measuring range complex databases and ALIBI memory ergonomic 5&rdquo; colour touchscreen touch-free operation Databases The instrument allows saving completed measurement data as complex reports and graphs. There are 7 databases: Operators (max 100 entries), Products (max 5 000 entries), Weighings (max 50 000 entries), Packaging (max 100 entries) Formulations (max 100 entries), Customers (max 1000 entries), The balance enables creating formulation reports (max 500 entries). ALIBI memory provides data protection and facilitates automatic measurement recording (max 500 000 weighing records). The memory facilitates data previewing, copying and archiving. Communication PS X2.M series is equipped with the following interfaces: 2 x RS 232, USB type A, USB type B, Ethernet and Wireless Connection. USB allows for fast transfer and copying of work results (measurements, reports, databases) to a computer or other weighing device. The balance provides possibility of remote data management.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW