RAPIDSTAK F01350 TWO COLUMN MICROPLATE STACKER

ACCELA pump and autosampler for HPLC THERMO SCIENTIFIC ACCELA pump that does not start ACCELA autosa (more)mpler not tested To be considered for parts

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

Eppendorf epMotion 5075 Liquid Handler Laboratory Automation Robot &amp; Software This was removed f (more)rom a university lab where it was surplus to requirements. The unit powers up and the system and the PC communicate. We were able to get the tool holder to unlock and lock. It is showing a temperature unit module 1 issue. It is in good cosmetic condition with marks from use. Model - epMotion 5075SN - 5075 01005 Siemens Simatic PCEppendorf 6BK1800-0EP00-0AA0 Monitor not included.

This Beckman Coulter Biomek Fxp System with Software &amp; Accessories was removed from a university (more) lab where it was surplus to requirements. All units are in good used cosmetic condition but they do have various signs of general use. The system consists of: 1 x Beckman Coulter Biomek Fxp CAT No A31842.The unit powers up and both lights illuminate Green. It was not tested any further.The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included. 1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.It comes with:2 x Stacker 10 hotels.2 x FX Stacker 10 hotels.1 x Stacker Carousel Pendant.The mounting plate to connect it to the Fxp is included.It also comes with a spare Microscan, operational condition is unknown. 1 x Lenovo PC with monitor, mouse &amp; keyboard.It has the Biomek Version 3.3 software installed. 1 x Jun-Air 1795001 Compressor. The system also includes quite a few plates and consumables and various connection cables.

This CEM Discover CoolMate (SE) Microwave Cooling System was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but we were unable to test it further as we don't stock the required fluids to do so. It is in good cosmetic condition but has some marks from use. Max temperature 35ºCMinimum temperature -80ºC

Arpege 55 Liquid Nitrogen Canister This was removed from a university lab where it was surplus to re (more)quirements. The unit is in good cosmetic condition, with minor marks from use. It features 5 x Racks.

Agilent Infinity 1260 Fluorescence Detector (FLD) G1321B Spectra. Firmware A.07.02 8 ul Flow Cell. K (more)eeps original packaging. The FLD provides quantitative data and fluorescence spectra from a single run. Simultaneous detection of multiple wavelengths improves sensitivity and selectivity. Features include: Rotating gratings for on-line, multi-signal spectral data acquisition without loss of sensitivity. Lower limits of detection with Raman S/N > 3000 (using dark signal noise reference). Spectra and quantitative data from a single run. Simplified optical design to optimize baseline stability. Resolution gain of up to 100% in fast LC using 145 Hz data acquisition rate. Long life xenon lamp for maximum sensitivity. Long life flash lamp (> 4000 hours). Easy front access allows quick inspection or change of the flow cell. Agilent Infinity 1260 Fluorescence Detector (FLD) G1321B Spectra. Lower detection limits and easier spectral analysis for HPLC and UHPLC. As a stand-alone detector or configured in an automated system, the Agilent 1260 Infinity Spectra Fluorescence Detector brings highly sensitive fluorescence detection to your lab. This easy-to-use detector provides quantitative data and fluorescence spectra from a single signal. Simultaneous multiple wavelength detection improves sensitivity and selectivity. Use online spectral information for rapid method optimization and separation quality verification. High-speed fluorescence detection data processing up to 145Hz, keeping pace with ultra-fast LC analysis speed.

Ohaus 30400171 Modular Heat Block, 96-well PCR Plate The Ohaus 30400171 Modular Heat Block, 96-well  (more)PCR Plate is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400171 Modular Heat Block, 96-well PCR Plate includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty