Agilent 1260 Fluorescence Detector

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Jobin Yvon Horiba CCD-3500V Detection Unit This was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

This was removed from a university lab where it was surplus to requirements. The system powers up bu (more)t was not tested further for safety reasons, and a laser policy at our site. It is in great cosmetic condition. Driver serial No. 102200510ADRModel Ad-2200 Laser Module serial No. 102200510Central wavelength 593nmOptical output power 50nWFB-593-050-FS-FS-0-1-ST on data plate

Agilent Infinity 1260 Fluorescence Detector (FLD) G1321B Spectra. Firmware A.07.02 8 ul Flow Cell. K (more)eeps original packaging. The FLD provides quantitative data and fluorescence spectra from a single run. Simultaneous detection of multiple wavelengths improves sensitivity and selectivity. Features include: Rotating gratings for on-line, multi-signal spectral data acquisition without loss of sensitivity. Lower limits of detection with Raman S/N > 3000 (using dark signal noise reference). Spectra and quantitative data from a single run. Simplified optical design to optimize baseline stability. Resolution gain of up to 100% in fast LC using 145 Hz data acquisition rate. Long life xenon lamp for maximum sensitivity. Long life flash lamp (> 4000 hours). Easy front access allows quick inspection or change of the flow cell. Agilent Infinity 1260 Fluorescence Detector (FLD) G1321B Spectra. Lower detection limits and easier spectral analysis for HPLC and UHPLC. As a stand-alone detector or configured in an automated system, the Agilent 1260 Infinity Spectra Fluorescence Detector brings highly sensitive fluorescence detection to your lab. This easy-to-use detector provides quantitative data and fluorescence spectra from a single signal. Simultaneous multiple wavelength detection improves sensitivity and selectivity. Use online spectral information for rapid method optimization and separation quality verification. High-speed fluorescence detection data processing up to 145Hz, keeping pace with ultra-fast LC analysis speed.

This listing is for a Elmi Sky Line Shaker Thermostat . The unit is in full working condition and i (more)s ready for immidate realese. The Elmi Sky Line Shaker Series is a high-performance line of orbital and rocking shakers, engineered for non-stop operation in a wide range of medical, chemical, and biological laboratories. These units offer exceptional flexibility, making them adaptable to different applications with a variety of optional accessories and attachments. The shakers come in multiple sizes and loading capacities, ensuring they can meet the specific needs of any laboratory environment. Key Features: High-Performance Operation: Designed for continuous, reliable use, ensuring stable and consistent results across various lab applications. Orbital and Rocking Motion: Provides uniform, controlled mixing, ideal for biological samples, chemical reactions, and cell cultures. Flexible Design: Compatible with a range of optional accessories and attachments to support different experimental setups. Variety of Sizes and Capacities: Multiple models are available, offering varying loading capacities to suit specific laboratory requirements. Non-Stop Operation: Built for extended use, ensuring continuous mixing and agitation for time-sensitive processes.

HR070-CMT 0.70X High Resolution C-Mount Adapter with ZN clamp ZEISS Diganostic Instruments For Micro (more)scope The ZN Clamp is compatible with the following Zeiss microscope models: Axiolab Axioplan-2 Axiophot-2 Axiotech Axioskop-2 Axiostar Axioskop-40 with Zeiss Standard trinocular tube Axiovert models 100, 135, 135M, 200 IM series when used with Zeiss Standard trinocular tube (45 29 02)

Thermo Scientific Accela PDA Detector This item was removed from a university where it was surplus t (more)o requirement. It is in good cosmetic condition and powered on. However, it has not been tested further as it requires software. The lab confirmed it was in full working order prior to removal. Also includes a replacement bulb.

This Gynkotek  UVD 170S HPLC System was removed from a university lab where it was surplus to r (more)equirements. The items are in reasonable cosmetic condition. All elements of the system power up but we were unable to test it at our facility. The lab confirmed that it was working when last used in 2018. There is a PC included with Chromeleon Software CD 6.4 SP2 installed. Included with it are;1x GynkoSoft Chromatography Data System Reference Manual1x GynkoSoft Chromatography Data System User Guide1x GynkoSoft System Suitability Test Instructions1x GynkoSoft Release Notes version 5.42

Hudson Solo SOL9 Liquid Handler This item was removed from a university lab where it was surplus to  (more)requirements. The robot is in very good used condition and has been successfully tested for communication with the includedsoftware. The previous client has confirmed it being in working order. System Includes:- 1 x Hudson Solo SOL9 Robot with a multichannel dispensing head and 8 position deck (with PSU) - 4 x 10cm Tall Nests - 2 x 6cm Tall Nests - 1 x 4.5cm Nest - 2 x Torrey Pines Scientific RIC20 Remote Controlled Chilling/Heating Dry Bath Units: - 1 with a TPS 620-5033 plate - 1 with a TPS 620-5045 plate - 2 x PSU's - 1 x BioShake Heated Shaker Plate (marked as faulty) - 2 x Boxes of 1000ul Pipette Tips (all sealed inside) - 1 x Lenovo PC with keyboard, monitor & mouse running Windows 10 with Hudson control software installed - 1 x Digi Edgeport 232 to USB adapter for controlling the RIC20 units

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Fully Antistatic Weighing Chamber Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. How will you get an even more accurate weighing result? This will be ensured by a special antistatic glass coating that compensates for electrostatic charges on the sample and laboratory accessories. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz