PR124 Ohaus

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

DMA 4100 M delivers the 4-digit density values you need and is not affected by your working environm (more)ent and workforce. It applies the patented Pulsed Excitation Method to deliver the most stable density results based on comprehensive knowledge of the oscillation characteristics. This method results in viscosity correction which is twice as effective as anything else available on the market. The integrated camera allows you to check the filling procedures of your operators at any time and also at the end of the working day. The patented condition monitoring ensures that frequently changing users with differing filling approaches, humidity, temperature fluctuations, air pressure, and instrument condition all have no effect on the operation and results – built-in intelligence for your convenience. Measuring range: Density; 0 g/cm³ to 3 g/cm³, Temperature; 0 °C to 100 °C, Pressure; Up to 10 bar Repeatability: Density; 0.00001 g/cm³, Temperature; 0.02 °C Reproducibility: Density; 0.00005 g/cm³ Accuracy: Density: 0.0001 g/cm³, Temperature; 0.03 °C Digital Resolution: 0.0001 g/cm³ Integrated tables and functions: Alcohol tables, Extract/sugar tables, API functions, Acid/base tables, 150 freely programmable tables/user functions (tables, polynomials, formulas, linear functions, and constants) Minimum sample amount: approx. 1 mL Measuring time per sample: 30 seconds Data memory: 1000 measurement results Interfaces: 4 x USB, RS-232, CAN, VGA, Ethernet Wetted parts: PTFE, borosilicate glass Industries: Beverages, Chemical Industry, Cosmetics, Personal Care, Electronics, Environmental, Food Industry, Petroleum Industry, Pharmacy, Medicine, Biotechnology Dimensions (LxWxH): 495 x 330 x 230 mm Weight: 22.5 kg

The GAC 2000 is a convenient and reliable test instrument designed for large-acreage farmers needing (more) immediate moisture, temperature and test weight information on up to 8 different grains. Measurement Method: Capacitance, conductance, weighing device Applications: Cereals, oilseeds, grass seeds, vegetable seeds, beans Measured Parameters: Moisture, temperature and test weight Moisture Range: 5 – 45 % (depending on grain) Grain Temperature: 0 – 50°C Temperature Difference: 20°C room to grain sample Temperature Compensation: Automatic Moisture Resolution: 0.1% Grain Type: Whole grain, pellets Sample Size: 250 g

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Phenometrics enable scientists to study algae under the same conditions found outdoors in the ponds, (more) but in the much more efficient confines of the laboratory. Each computer-controlled PBR uses breakthrough technology to re-create the environmental conditions such as temperature, light intensity, and CO2. Choose from pre-programmed experiments, or quickly and easily design your own, with the growth variables that are most important to you. Many researchers use the PBR to set specific parameters to maintain consistency between experiments. Most importantly, the PBR enables reproducibility, a key factor in algae research experiments. The PBR saves time and money while producing better results. Each PBR is also a measurement instrument, measuring growth rates, pH, and other factors in the algae reactor vessel, which are displayed on the computer monitor in a graph or data display. It is customizable to accommodate various probes and sensors that monitor algae culture and growth metrics. 3000 μ-Einstein LED specially designed lighting system with conical vessel that accurately mimics BOTH raceway or production tube bioreactors (controllable from 0- 3000 in steps of 25 μ-Einsteins. Fully programmable Diurnal Cycles; you set the length of sunlight day, and also the hour of peak sunlight. Fully programmable heating and cooling, linkable to the diurnal cycle; you can independently set the hour of peak heating (if different from peak sunlight). Active cooling and heating, from 5 – 50°C Algal Command Software provides for complete, simultaneous, integrated control of up to 256 bioreactors from a single computer, with collation of all data. All the reactors are linked together via Ethernet Hub. CO2 programmable and controlled from Algal Command. Mixing through active magnetic stirring and/or gas sparging. Active sparging of up to two gasses Temperature measurement True Turbidostatic measurement Field-configurable, fully autoclavable, low cost durable polycarbonate reactor vessel The reactor vessel can have as many inlets and outlets as you require 100% (+/- 10%) directly-proportional (by volume) up-scale to pond, raceway, or indoor reactor pH measured and controlled by Algal Command Custom-engineered Turbidostatic Pump allows for true turbidistatic operation; fully programmable and computer-controlled. System contains 4 reactors and pumps with laptop Culture vessel volume: 700ml Working volume: 150 – 600ml Light intensity: Variable up to full ocean sunlight at equator (>3000 mmol photons m-2 s-1) in steps of 25 Temperature control: Active cooling and heating Culture temperature range: 10 – 50°C Diurnal + heating and cooling cycles: Fully programmable and independant Ability to control and measure pH: 0 – 14, may be controlled automaticly using CO2 gas Mixing: Magnetic stirrer Gas control: Computerized, CO2 or other as required Groth rate measurement: Continuous, via turbidistat Sterilization: Entire reactor vessel assembly, including culture medium, may be autoclaved on the “Liquid” cycle Turbidistatic pump: True turbidistatic operation, fully programmable from groth fase Dimensions (HxWxD): 482 x 241 x 318 mm Weight: 7kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW