Polyscience SD15H170-A11B 15L Heated Circulator, Standard Digital (Ambient +10 to 170C), 120V, 60Hz

COMBISTORAGE 60 FIRE TYPE 90 CERTIFIED SAFETY CABINET - CHEMISAFE General features: - Completely mad (more)e of 1 -1.5 mm thick galvanized steel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with fire dampers which close the ducts when the temperature is higher than 70 °C according to DIN 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded - Adjustable leveling feet - Lock and key - Height-adjustable shelves in painted or stainless steel - Shelf fixed with aluminum pins, excluding all risks of sparks - Fire resistant shelves - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470 and EN16121 standards - DOOR OPENING TO THE LEFT, opening with door to the right on request INTERNAL COMPARTMENTS for the storage of various families of chemicals: - Separation by means of 18 mm thick HPL panels covered with thermo-expanding gaskets (possibility of having up to 3 compartments and customization compartments - do not hesitate to contact us) Supplied: - COMPARTMENT FOR FLAMMABLES: 1 painted steel shelf + 1 retention tank with grid - ACID/BASE COMPARTMENT: 3 plastic-coated steel shelves (max load 60 Kg evenly distributed) Optional: - Shelves - Visual and acoustic alarm - Timer - Fire extinguisher - Electric aspirator - Activated carbon filter - Molecular suction system

Julabo FT902 Immersion Cooler, 115V/60Hz Working Temperature Range -90°C to 30°C Refrigerant R404A/ (more)R23 Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution - Integrated temperature control and display - With external Pt100 sensor (200 x 6 mm dia., stainless steel) JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT902 Immersion Cooler, 115V/60Hz includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 4 x 15ml Adapters, Cat. # 022637606 New in box Eppendorf 4 x 15ml Adapters, Cat. # 022637 (more)606 for the A-4-44 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 4 x 15ml Adapters, Cat. # 022637606 are designed to be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 4 x 15ml Adapters, Cat. # 022637606 includes: - Full 6 Month Parts and Labor Warranty

Edwards T-Station 85H Dry Turbo Station CF63, 100-120V Ultimate Pressure <5 x 10-9 mbar Inlet Con (more)nection DN 63 CF Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application The Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Dry Turbo Station CF63, 100-120V includes: - T-Station Pumping Station Base - XDD1 Diaphragm Pump - nEXT85H Turbomolecular Pump with CF63 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty

Scilogex DS-160/T7 Saw-tooth Generator ProbeThe Scilogex DS-160/T7 Saw-tooth Generator Probe is for  (more)use with D160 Homogenizer and has a diameter of 7mm x 130mm. The Scilogex DS-160/T7 is for tissue and can hold volumes 1-50mL.INCLUDED: The Scilogex DS-160/T7 Saw-tooth Generator Probe includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus DFD32M1000ES Defender 3000 Drum Floor Scale, 1000 lb., 0.2 lb. Maximum Capacity 1000 lb. (500  (more)kg) Readability 0.2 lb. (0.1 kg) Platform Size 30 x 30 in. (762 x 762 mm) Features - Weighing, Counting Parts, Checkweighing, Accumulation, Dynamic/Display Hold - Backlit liquid crystal display (LCD) - AC adapter with Auto Shut-off feature - Easy access communication port including RS232 interface - Constructed of mild steel with an epoxy paint finish - Convenient portability with polyurethane wheels - Low-profile design - 2 Year Manufacturer's Warranty

IKA C-Mag HS 4 Digital Magnetic Hotplate Stirrer Speed Range 100 to 1,500 RPM Heating Temp. Range  (more)50 to 500°C Stirring Quantity Max. 5 l Features - Powerful motor for stirring quantities of up to 5 l (H2O) - Simultaneous digital display of target and actual temperatures via LCD display - Directly connection for a PT 1000 temperature sensor enable a precise temperature control (included in delivery) - Control accuracy in medium +/- 0,5 K (in combination with PT 1000) - Display of actual temperature value in medium with 0,1 K resolution when using PT 1000 temperature sensor - 3 operating modes to choose (standard, safe, adjustment protection) - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-Mag HS 4 Digital Magnetic Hotplate Stirrer is a powerful and versatile lab tool, ideal for stirring quantities up to 5 liters (H2O) with a speed range of 100 - 1500 rpm. It features a simultaneous LCD display of target and actual temperatures, and includes a PT 1000 temperature sensor for precise control with an accuracy of +/- 0.5 K. With three operating modes (standard, safe, adjustment protection), a fixed safety circuit at 550 °C, and a Hot Top indicator, it ensures safe operation. The ceramic set-up plate provides excellent chemical resistance and heats up to 500 °C. The stirrer’s compact design, durable construction, and advanced features, including a digital error code display and elevated control panel, make it a reliable choice for various laboratory applications.

Dimensions (WxDxH): 2300 x 700 x 780 mm Weighing stone dimensions (WxD): 680 x 530 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW